Fermerry 26 AWG Stranded Wire Spool 25ft Each 6 Colors Flexible 26 Gauge Silicone Hook up Wire Kit Electrical Tinned Copper Wire

I've been working in the electronics field for over 40 years and know my way around wires. I know test lead silicone wire is expensive and only used for special projects. I was a little worried about this wire after reading some of the 1 star reviews. Well, either they had the wrong wire or maybe not very experienced with soldering. First I would like to say the silicone insulation is very flexible and heat resistant. Second, the wire solders just fine. I had no issues with the flux core solder I was using ( Kestor "44" Rosin Core #66/44). I think maybe the bad reviewer didn't have a hot enough soldering tip. I was soldering 14ga wire with a Weller station at 700 degrees and the solder flowed beautifully. i would not hesitate to buy this wire again for future projects. The cost was well worth the quality.

I was fiddling with 22-guage servo/Dupont jumpers on my quads. For longer runs I was using cannibalized Ethernet strands. I knew for the vibration a quad encounters, I really needed flexible silicone wire. It's also resistant to soldering temperatures, which is nice. Then I realized, "Hey. These are digital signals. 5v at 40 mA max. If I look at the ampacity of small-gauge wire, I see that even AWG 30 wire can handle 500 mA. (there's a picture attached of what my big F450 quad looks like using 22 AWG servo/Dupont connectors. They look more like giant cables than wires.As a test, I decided to replace the LED data line with 38 AWG motor winding wire. It functioned perfectly, and was nearly invisible, but working with it was tricky. it was hard to see when I was installing it, hard to keep straight (since there's no colors), hard to strip and delicate. I knew I needed something more "normal."I realized that if I used AWG 30 silicone wire, then it will be vibration and heat-resistant, simple to route flush into corners of the quad (vs stiff wire), and save weight. It won't be hard to bend, or choose its own annoying direction. I also needed to get color-coded wire that I could see and that I wouldn't get mixed up when wiring the GPS, i2c, serial, LEDs, OLED, camera, gimbal, etc. I still needed thicker wires for motors and stuff, but for signal lines, it seemed that 30 AWG silicone would be much better than the common 22 AWG PVC.I wish I could find a 30 AWG silicone ribbon cable, or otherwise some type of wire-bundle. Routing all the individual wires (power, ground, Rx, Tx for most accessories) is hard to do neatly.The box that came is really nice. The holes are well-placed to keep it from being messy. I don't know why I was surprised at how small the box is. The length and thickness of the wire is exactly what I wanted. The box fits on my crowded workbench, which is a great bonus. In the picture you can see the size on my new 5" quad and alongside a standard 30 x 30 flight controller. The colors of the wires is clear to see, but they're a little "pastel" for my taste. The wire is super-flexible. It works great for all my 5v signal lines. I'll have to check the draw of my other accessories (GPS, OLED, buzzer, receiver, &c) before using it on them.In conclusion, I'm really happy with this purchase. It's a great price for the right length (10 feet) of really thin flexible wire that will be perfect on my quads.This review written with the promise of a gift for me taking the time to write one. However they made no suggestion at all that my review be positive. I've tried hard to be balanced, just to prove I'm not being "bought," but I can't really think of anything to criticize. It's what you would expect, packaged in a thoughtfully-designed box for a great price.

The Fermerry 24 AWG stranded wire spool is a must-have for any wiring project. It’s super flexible and conducts electricity well. The fine strands make it easy to work with, and the 5ft spool has plenty of length for all your needs.

I recently purchased the 30 AWG Silicone Wire Kit Spool from Fermerry, and I have to say, it's a great deal for the money. I love that it comes with spools of wire in six different colors, making it easy to keep track of which wire goes where. Plus, the cable management and sleeves that come with it are a nice touch.While the wires do feel a little flimsy, that's mainly just because they are the small 30AWG wires. They are still very flexible and easy to work with, which is a huge plus. The silicone coating also makes them very durable and resistant to breaking or fraying.Overall, I would highly recommend this wire kit to anyone in need of small-gauge wire for electronics projects. The price is unbeatable, and the quality is great. The different colors make it easy to keep track of what you're working with, and the cable management and sleeves are a nice added bonus. Thanks, Fermerry!

Perfect. This is stranded wire, very flexible, with the soft insulation that can be stripped with finger nails.I use it for drone sensors and home automation sensor devices. Good stuff.