Brass Battery Terminal Connectors, Top Post Battery Terminals Connector Battery Cable Ends for Marine Car Boat RV Vehicles (1 Pair)

This is a decent well made battery clamp made of brass. Most are made of lead. What I like is I use these in a marine and other applications. They are very durable and long lasting, and corrosion resistant. The one thing to be careful is over tightening! They are tight enough when both legs that the bolt go through are parallel and you cannot turn the the clamp on the battery post. Going further you can crack or break one of the legs. The brass is a copper & zinc derivative. Lead clamps on the other hand are forgiving but will start too loosen if over tightened. Lead is a good conductor but not as good as brass and not a good steward to the environment.

Good

Works as should.

Way heavier than I thought they would be, should last a long time. I did notice that the bolt for cable attachment will fall out when the nut is removed, so hold onto it. The clamps are marked P and N but the bolts for squeezing the clamps tight are in the same position, the connectors are exactly the same. One should be in the opposed position so the nut is to outside of the battery post. You can’t switch the bolt around due to the locking tab that prevents the bolt from turning will be in the way. Won’t be a problem if your battery has a flat top but if it has raised one for a venting chamber then you might have a bit of a problem getting the clamp tight.

Excellent. Bolts could be longer. On the positive terminals, I put longer bolts. Installed 4 of these on the Old Dodge Ram turbo diesel.

Very robust, very good material. Probably worth the price premium over comparable parts.

Installed with a battery saving switch.

I had to order a second set. The negative terminal on the first set fractured the first night it dropped below freezing. The terminals are cast brass. I don’t know if the fracture in the casting was there from the start, but it would’ve left me stranded had it not happened at home. Price was cheap enough that it wasn’t a big deal to buy the second set, but I’ll probably replace in the not so distant future.

Crappy build quality. One was too wide and did not tighten well on the battery post. If it’s for a temporary fix will be fine, for a long term solution I don’t recommend it.

Utiliser pour changer cosses hs sur suzuki swift 3.parfait

They are Perfect 👌

Heavy material, good for price comparatively

Good quality brass. Not too hard or stiff for clamping. Good fit onto respective terminals. Each is embossed with P and N for identification. Made in China but excellent value which will outlive many batteries.