Turner Moore Edition Blue Reflective Vinyl Permanent Adhesive, 12x12 Sheets Reflective Vinyl for Cricut, Cars, Bikes, Decals, Stickers, Signs, Helmets, Mailbox, Numbers, Reflective Tape (3-Pack)

I wanted to make house numbers for our new mailbox before I installed it and I wanted to make them with reflective vinyl to make them easier to see at night. This roll seemed reasonable for the price. It does indeed reflect as advertised. I will attach a pic taken with the flash on. I did find it tricky to cut on my Cricut. Since it is thick, I tried first setting it to Vinyl+. That cut but not quite deep enough to cut the vinyl and adhesive and it was tough to weed. I tried a custom setting as recommended by another reviewer here with a little higher pressure and a double cut. That failed because on the second pass it would fold over the small ends of the letters. Next I tried the default Holographic Vinyl with a single cut and that worked better. Pressure was about 195 on that setting. If I have to cut this again I might bump that to about 210 or so. It loves to stick to itself so as I was weeding I kept a pair of scissors handy to snip off the excess as I peeled it up. It’s very stretchy and easy to ruin. I managed to mangle one just applying the transfer tape, my transfer tape had a bubble in it and it pulled up a number when I tried to smooth it out. That was my mistake though, not a fault of the material.

It is very useful, I recommend it to you.

I use this for doing decals on fire engines. Serves it's purpose and holds up well

Cons:The film is almost more of a foil than a vinyl. It is a little hard to find the right setting for cutter. If you try to make small intricate designs the cutter blade will grab it and just start tearing it. You also have to be careful installing to not get air bubbles because you can't work them out like vinyl. Might be better to apply wet like window tint. For that reason I give it a 4 star instead of 5. Pros:It is surprisingly durable. I have had these decals on my SxS for about a year now. They adhere really well as the pressure washer has not affected them at all. The original decals that came on the buggy started lifting almost right away when washing. These have also had tons of brush drug over them with no real damage. If not for the cutting issues it would have gotten a 5 star review.

Great product. Used for making car stickers

Extremely reflective and great material appearance, however weeding this vinyl is a nightmare. It takes me 3 times as long to weed this material than most other vinyl. The backing of this material makes it hard to weed because the vinyl doesn't stick to it very well so I'm constantly having to reposition pieces while I'm weeding.

Why did you pick this product vs others?:To help others for circut maker users. Notbook paper setting. Normal pressure. 40° blade. Cut like a dream.

It is reflective but it is very very low quality vinyl. it tears easily, has no air release tech (didn't expect it too) and is almost impossible to remove. I liken this more to a reflective stick than vinyl. If you want to cut out a small decal of some sort it should work if you are very careful in application. IF you want anything large that has a decent surface area you are going to have problems. If you are used to automotive and hobby vinyl this does not allow you to lift and reset to remove wrinkles or air bubbles (soapy water didn't work and vinyl just never stayed stuck after) so it needs to be perfect from the start.I have used many other vinyl wrap and have never had the issue i had with this one. Ended up tossing the whole roll after several attempts. Removal was a nightmare. It rips in small chunks and is almost impossible to take off any significant amount at a time. i would look for something else and stay a way from this one.