LutronSkylark 1.5-Amp Single-Pole 3-Speed Fan Control, SFSQ-FH-WH, White

Works well controlling my fan using a dedicated circuit. I removed the remote control circuitry from my ceiling fan and wired the fan power wire to this controller which is now responsible for managing the electrical power going to the fan. It works well, with three on speeds and one off. For reasons I'm not sure, it also has the ability to reverse the fan by turning the fan on and off quickly. If I do that a few times I can get the fan to reverse direction. I think that is a property of the fan and not the switch.I started with two switches in a junction box with separate wires; one for the fan and one for the light. But the power was wired so that either switch powered an electronic control unit that could control both fan and light and set fan speed and light intensity. This was awkward and confusing as you had to turn on one switch and then use the remote and the other switch did nothing. Instead I pulled out the electronic control unit from within the ceiling fan and wired the fan and light to each switch separately. For the fan I used this controller; for the light an LED dimmer switch. Now the controls are intuitive and easy.

These are amazing. Originally i bought one from Home Depot and it was $4 more per switch. We wanted to be sure it worked and was quiet before we bought one for all our fans. It needs extra space in the electrical box because of the motor extending in the back, so you will need to tuck wires "creatively " but we fit this and a rocker switch with caps on all connections with some creative tucking. If you are wanting a fan dimmer i highly highly recommend these. They are silent (some motors will hum a bit from the switch itself, not just the fan hum). If you want a quiet wonderful product this is it.

Although I have all the tools necessary to install any switch, the only ones you will need to install this fan switch are a screwdriver to remove the old switch and a pair of pliers to straighten the old wires.So, if you are game, this is all you have to do:1. Turn off the power to the fan. Either turn off the breaker or unscrew the fuse.2. Remove the screws from the cover plate and put them in a bowl so you don’t lose them.3. Grab the switch and pull it out of the electrical box as far as it will go to give you room to work.4. The hot wires are generally black or red. The neutral wires are white. The ground wires are green or uninsulated.5. This switch has no neutral (white) wire, so if your old one does, like mine did, unscrew the wire nut holding together the white wires, remove the neutral wire from the old switch and screw the wire nut back on. Using your fingers or the blunt end of your pliers, push the neutral bundle as far back into the electrical box as you can.6. Now, you need to disconnect the ground and hot wires from the old switch. Unscrew the wire nuts and remove the old switch wires. Use your pliers to straighten the hot wires.7. Wind the green wire from the new switch around the ground wires and twist on the wire nut. Continue twisting until it is tight. Use your fingers or pliers to push the ground bundle as far back into the box as you can.8. Now, connect the black wire from the new switch. You can just lay it parallel to one of the black wires and put one of the wire nuts over them. Twist until tight.9. Lay the red wire from this switch parallel to the other black wire, put the wire nut over them and twist until tight.10. Use you fingers or pliers to push these hot wires as far back into the box as you can.11. Push the switch into the box as far as you can.12. Use the two screws provided to secure the switch to the electrical box. Use your fingers to thread the screws into the box. Then use the screwdriver to pull the screws tight, alternating between the top and bottom screws. Don’t go gorilla on them. They just need to be a bit more than finger tight.13. Once the switch is secure, you just have to screw the cover plate back on.14. Last step, turn the breaker back on or screw the fuse back in.Take your time. Be safe.

Simple and functional. Has points of friction along the slider. Well made and easy to install. There are no intrusive printed lettering or branding.

Same Lutron quality I have come to expect. Installation is very simple and if you're not familiar with doing electric work, the included install sheet is very clear. Have an electrician help you if you don't know basic electricity.The control is very simple to use. Bottom is OFF. Slide the control up to select from Low, Medium, and High speeds. I am using this on a Hunter fan and leave the fan's switch set to High. There is no extra noise from the fan or switch when using it. The fan runs at the same High speed as it did without the switch. The Low speed is a bit faster than I would like, but if I use the Fan's switch to go to Medium or Low it will slow down even more.I have a matching dimmer in the same switch box that matches the look of this fan switch. Nice finish and looks great installed.

This works perfectly. I replaced all three fan switches in my house and had no problems. Now I can control the speed without stretching for the chain and guessing how many pulls gets me where I want. Maybe 10 minutes install time (follow instructions and turn off the circuit breaker). Make sure the fan is on high before you wire this up.

Really great quality for the money. It was simple to install - you might have to move wires a bit to get it to fit. My fan’s speed switch broke so it only functioned on high or off, so I installed this to give me all three speeds again.

Works great, looks great, ideal for setting up a light as a dimmer or (in my case) a variable speed fan where I didn't install the light fixture.

Easy install and good quality

The unit worked well when initially installed, but when I tried to just slightly adjust the position in the socket there was a big bang, the smell of burnt insulation, and everything stopped working. For some reason the power wire to the unit touched something or was pinched - I don't know, but the unit was charred and non functional. I had to buy a totally different unit from a local store to get the fan working for that weekend