CRO1000 4-Stage Tankless Commercial Reverse Osmosis Water Filtration System, for House, Restaurant, Small Business, and Light Industrial Use,1000 GPD High Flow, Upgraded Size Filters

The CRO1000 has been a game-changer for my home water filtration setup! Every weekend, I used to spend time cleaning just under one liter of precipitated municipal water contaminants from the boiling tank of my Durastill water purifier. However, since integrating the CRO1000 into my system, this tedious chore has become a thing of the past. The division of labor between the CRO1000 and the Durastill appears quite effective. The CRO1000 takes the first pass, removing contaminants larger than its smallest membrane opening. This pre-filtering has measurably reduced the burden and increased efficiency of the Durastill. The Durastill treats what doesn’t boil below or near the boiling point of water, and VOCs like benzene and toluene. As a result, the Durastill’s boiling tank hasn’t required cleaning in over a year! The CRO1000 is not only efficient but also easy to install and maintain. It’s a reliable workhorse that has significantly improved the quality of my water and the longevity of my Durastill purifier. If you’re looking for a robust reverse osmosis system that works seamlessly with other purification devices, the CRO1000 is the way to go. Highly recommended! Thanks much John!

I would highly recommend any and all ISpring water treatment products. I have many of their products and they have all worked great and have solid construction. I used this CRO1000 system as part of a custom point of entry RO install project on a 4 story beach house with 5 bedrooms, 7 1/2 baths, and a 5000 gallon pool. I also used Isprings whole home UV light filter, pre-sediment filter, RO booster pump, and a Rockwell 250gallon holding tank, a well pump, and other misc parts. All in cost was around $3.5-4k. Now the entire house runs on RO water which not only tastes great and is far better for your long term health, it protects all of the homes appliances/plumbing from degradation, stops build up of scum in showers and toilets, and now acts as an emergency water reservoir that can be used even when the power is out. Having perfect drinking water from every outlet in the house is super convenient as well. A few months post install I had what seems to be a premature failure of the UV LIGHT BULB and O-Ring seal on the regulating valve. luckily NICK from customer support responded to me right away and was able to cover the issue under warranty and send out new parts immediately!

The filter works great! We have a lot of sediment, salt, and iron in our well water but the filters completely clean the water and you can't taste anything bad in the water anymore. Sean at customer service was a huge help when we needed it! It was pretty easy to set up and the water pressure is good so far.

Most impressed with this system! I am not using the system as suggested. However, the results this system has produced have been surprisingly successful! I have taken well water with a TDS of near 1700ppm down to approximately 300ppm. The system has accomplished this with an incoming PSI around 45-50. I have not calculated the rate of production of clean water at this PSI. It is a constant flow comparable to what an under the sink RO flow rate would be filling a glass. If I trusted the plumbing feeding the RO I would crank it up but the CRO1000 is producing a good amount of filtered water at a PSI well under what it calls for. Customer service from iSpring or 123filter.com have been extremely nice and helpful with my application. Nick specifically helped me the most and had no problem assisting me with my application. 10/10 would recommend this product and company to anyone that has issues with their water!

Nice RO unit, easy assembly, all parts fit together well. Warranty registration was a breeze with a super fast response from Robert to register extended warranty.

I have purchased the CRO1000, but not yet installed it. After assembly I have little doubt that it is a great product. I chose iSpring because of the Customer Service I have received, with this and several other iSpring products. I will purchase anything I need from iSpring if they have it!

I purchased the system to supply potable water to my residential kitchen ice maker, refer and pot filler. Our softening system left a large amount of Sodium ions in the water. It is crystal clear and tasteless in the kitchen now. This system is plumbed with 3/8 tubing, so it does not have adequate flow without a booster pump- unless you have really high domestic pressure on your well tank. I decided to opt for an alkaline post-filter to correct the pH and had a problem with the last filter leaking. After speaking with Julius in Customer Service, A new filter was sent and all seems to be working beautifully. I am very happy with the install. The filter assembly is designed to rest on the floor with casters, but was easily adapted to a wall-shelf with anchors at the top. Pressure/flow is low due to the tight R/O membrane. If you want consistent flow, be sure to get an accumulator tank. 5 Gallon works great!

I have low water pressure only 40 pounds, Here a pump should come included, ispring sells its PMP1000 pump at 700.00 very expensive, customer service is not good with fancis, they just want to sell their very expensive pmp1000 pump and if I don't buy their expensive pump they won't they give information. I have bought the e-chen EC-636-1000H pump of 100 gpm and 100 pounds of pressure at only 200.00 dlls and I have done my tests with 3 36 volt batteries as far as my 110v to 36v converter arrives, later I will make a test with a bomb Lotus50h 1.2 Hp 1x127v Lotus50-6/1127 at the beginning of the filters with 100 pounds of pressure