Buck Knives 284 Bantam BBW EDC Pocket Knife, Black, 1.5 oz

This is a top notch pocket knife. The size is perfect, the blade was super sharp out of the box, itseems very durable and tough. My only criticism is that it can be finicky when trying to close the blade.

Ok, I haven't REALLY run this knife through the paces yet... but I do know knives fairly well so I'll give this an interim review. First notice, the bevel is ground and set properly, but it is ground and not honed. So the bevel is course and this was not sharp out of the box (not what I call sharp). Not to worry, it actually honed up easily enough. 15 minutes or so in and it would shave arm hair clean effortlessly. I didn't spend a ton of time on polishing the bevel, so it still feels a little "toothy," but it's sharp for sure. The blade is a touch on the thin side for it's size, but only a touch. It's substantial enough the blade is going to be durable against breakage. The blade itself is acid washed, so the finish will hide scratches and scuffs quite well. The blade is marked "Buck USA," so I'm kinda trusting Buck that the blade is US production. Lots of people seem unimpressed by the handle. For sure it isn't bone handles with brass liners and polished bolsters. You won't get that at this price, even in a Chinese knife. The plastic handle looks, feels, and acts eerily similar to a Glock pistol frame. I suspect the same, or a very similar, type of polymer was used. That said, there is no liner, just the polymer. The clip is very usable, but a bit snug. The frame back lock works well. Honestly, Bantam is an apt name. This knife is quite light for the blade size. I Chalk it up to the polymer handle, absence of a liner, and the "adequate but definitely not beefy" blade thickness. I Chalk the weight up as a pro, but I could see it being viewed as a con. That said, there are drawbacks. It is difficult to open one handed. Part of this is the location of the thumb stud. It could have been moved just 1/8 inch toward the spine, and 1/4 inch further up the blade toward the point, and there would be a lot more leverage to flip it open. There is adequate blade material for the thumb stud to be moved, and moving it slightly closer to the spine would allow it to be slightly longer (though only slightly, else it would impede the ability to hone the knife). Also, the blade is stiff in the scales. I don't know how the blade was pinned (other than with a through rivet, thats apparent), but I'm skeptical that there are brass shims to reduce friction between the blade and the scales. Such a small expense would have made this a much better knife. Speaking of the thumb stud, some have commented that it's a little short and hard to catch your thumb on... there's a reason. Making the thumb stud any longer would impede your ability to hone it at a good sharp bevel angle. As it stands, if you're new to freehand honing and want a good knife to start on this is the one. You can get the proper bevel angle by placing the edge of the bevel and the thumb stud on the hone, then lifting the spine of the knife so that the thumb stud has a tiny bit of space between it and the hone. This will give you a nigh perfect pocket knife bevel. Generally I would only give this 4 1/2 stars, based mostly on blade quality, price, and usability. Sure it has some minor compromises in construction, but it's a US made knife for $25. With a decent blade to boot. Can't go wrong there. Unless I caught wind that Buck imported the blade blanks, then I would give it no stars. I'm putting a little faith in Buck that they didn't import a blade blank with USA stamped on it.

This knife isn’t pretty, but is one of the best pocket knives I have ever owned and for the money, outstanding. It is sharp! And stays that way. I have a tendency to lose knives and can say for certain if I lose this one, I will replace it with the exact same one again.

Let me begin by saying I didn't do my research before I bought this knife, that is completely my fault and I'm not reducing this knife's rating because of it. There are four sizes of these Buck Bantam knives (nano, small, medium, and large). I purchased the small when I should have gone up to at least a medium. That being said, I'm not too disappointed with the small. I like my pocket knife to fit in my fist, this knife (when opened and gripped as designed) only reaches about half-way down my pinky. It's annoyingly close to being just big enough. Nonetheless, it's comfortable and could be useful for smaller jobs. Minimal jimping on this knife, can't downgrade the knife too much for this because it wasn't designed for heavy duty work. Thumb stud is effective, but not as fast as some of my other EDC knives. Stud does not extend as wide as the knife body which reduces speed trying to get your finger to the stud. Knife is a lockback (as opposed to a Walker Linerlock sytle) which really comes down to personal preference. I prefer the linerlock because of the much easier one-handed operation. A big disappointment for me was the lack of a belt clip on the small knife. Looks like Amazon mixed some reviews together and I assumed (again my fault) it would come with one. I hate having any odd shaped object sitting sideways in my pocket, bugs the heck out of me, so I was really worried about this knife in there. Luckily it's small enough and light enough that I easily forgot about it and it wasn't a problem. A lot of people are very hesitant of the plastic handle, first of all, it's technically thermoplastic, a polymer. This isn't a knife you see sitting on the gas station counter for $1 each. I'm fairly confident the rivets on the knife will wear out and loosen long before the plastic handle itself sees any damage or weakness. You WILL NOT be able to disassemble or adjust tightness of this knife, they are riveted. Time will tell how strong those rivets are but I doubt I'll see any weakening soon. The blade is just plain sexy. Clean, great contour, and 'BUCK USA' written across the top. No 'made in china' written on the blade, it seems like Buck is downplaying these knives are imported. I'm always a little hesitant when people claim the knives are razor sharp from the factory, they haven't seen my diamond wet stone yet. But they were right about this one, it's shave sharp no problem. Of course I have to note the price, GREAT VALUE! If you're thinking about getting this knife you need to think about what role it will fulfill. *Size - knife offers smaller size but that means less control and force can be applied. (Should be noted the knife fits my girlfriends hand perfect) *Speed of Deployment - it's going to take longer to 1) dig this out of your pocket (vs a belt clip) and 2) utilize a slower thumb stud (personal opionion) This knife is probably going into the girlfriend's purse, it just doesn't quite fit my needs. I've got a new knife on the way I'm excited to try out and test but will highly consider getting a medium or large Buck Bantam in the future for EDC or as a back-up to keep in the truck or tool box. EDIT: I finally bought a Bantam Large, It wasn't bought as a replacement to my EDC knife (Spyderco Tenacious) but as a back-up to go into the kit in my car. The small knife I bought was razor sharp when I got it, this one however was no where close to that. I had to work it for a while get a clean cut on paper. Oh well, I don't mind putting my edge on it. Anyway, this will work great for what I bought it for, not an EDC though. This large model just isn't that comfortable in my hand.

Hubby has always carried a pocket knife. He lost his very old, expensive dress knife. He picked this one as a replacement and is pleased with his choice. Good, stable blade. Easy to close and open.

I have owned Buck knifes for over fifty years. I wanted a little pocket model, something smaller, easier to carry around than my classic 110. I didn't want to spend a lot of money but I wanted something very useful and wanted it to be made in the USA. Buck served this model up and it was just what I needed and wanted and it was made here. Sold! I didn't need some $100+ fancy hand made work of art. I wanted a knife I could slip into my pocket and have ready to use when needed. I didn't want to worry about losing it or getting a scratch on it, whatever. I did want it to be sharp, hold an edge and be easy to sharpen. It does all those. I love this little knife. I can't believe they sell it at this price point. Forget those Chinese things with strange names you never heard of. This is a BUCK. They are an American family who have been doing this for well over a hundred years. They put their name on it and stand behind it. You could not ask for more. You can take pride in owning one of their products and their products will repay you by giving you years, decades or more, of service. I don't think you can beat this little knife for what it is and what it cost.

First off I had ordered this knife by mistake. I was going to order the size larger but that was my mistake and I am happy I made it. I will admit I was not overly thrilled when I first opened the knife. The handle felt cheaply made and was made of a thin plastic. After I carried it around for a few hours I realized it had the plastic made this knife very light. I had wanted a small knife and that fits the bill. The best part of this knife is the blade, as it should be. I am very satisfied with the shape, size, and sharpness. I showed it to my boyfriend and dad and they had the very same first impressions about the feel of it, but once they checked out the blade they were impressed. It is very sharp! The backdrop blade is a very nice feature. The only things wished were different is there is not a clip on the knife and it is not easy to open one handed. I tried several different ways to open it one handed even tried left handed and could not open it one handed. However for the price it is defiantly worth it. I have never had a mid back lock blade before it is not as easy to close as a normal lock back knife but I think I will get use to it. Best mistake I have made in a long time. The knife is a nice size for a women but my boyfriend said it was not an uncomfortable size for him but he would not go much smaller so if you have larger hands may not be the best knife for you. I am tempted to buy my girl friends one to keep in their purses, but I will test it out thoroughly before I buy another for anyone. I will update this if I come across any defects or flaws with the knife. Pros: Sharp blade Back drop point Light weight Mid-lockback Can be used left or right handed Cons: Feel of the handle Not easy one hand open No clip

This is a good knife at this price point. Pros 1... The fit and finish is more than acceptable. 2... The blade is well centered and shaving sharp right out of the box. 3... The lock up is solid and there is no wiggle. Cons 1... The action is stiffer than we have been accustomed to with other one-hand knives so this is not a "flicker". And safety requires two hands to close it. 2... The item I received does not qualify as a "featherweight". I don't have a scale but this appears to be of the same weight and size in my hand and pocket as the Buck 112 slim which I already own. It can be carried comfortably in the pocket of heavy jeans. But it would present a challenge when wearing lighter clothing such as dress pants or gym shorts.

Una navaja sencilla y bien construida. Viene bastante afilada y es cómoda en la mano. También es lo suficientemente ligera como para llevarla día a día, el clip ayuda a su portabilidad. En general, es una muy buena navaja para quien quiera una para llevar al día a día sin hacer un trabajo extremadamente pesado.

leggero,affilato, made in usa

Me encanta el tipo de seguro que buck maneja, está es una navaja exactamente de bolsillo (pequeña) pero bastante resistente, buen filo de fabrica y fácil de afilar.

Excelente producto muy recomendado

Très bon couteau,léger peut encombrant et de très bonne qualité !