Dasbecan Backup Camera Compatible with Ford F150 2010-2014 Mustang 2015-2020 Lincoln MKC 2015-2019 Park Assist Rear View Camera Replaces# EL3Z-19G490-D BL3Z-19G490-B

This replacement took all of 5-10 minutes to complete. Just pop the emblem off, 2 bolts to remove the chrome base, and 1 T-25 screw that holds the camera in place. The camera in my truck had been erratic at best starting about 4-5 months ago. It would come on and off sometimes and other times just said it wasn’t available. For the last 2 months I have just had no camera at all. I saw this camera on Amazon and figured for around $30 it would be worth a try. It arrived today and I had it installed in no time at all. My emblem had already been upgraded to the new Ford emblem at some point before I got the truck so I can’t speak to how easily the original emblem might break. Mine was good to go luckily. The new camera works great. The picture is super clear and better than the factory camera ever was. The zoom function doesn’t work but I never used it anyway so who cares about it really. The lines seem to be spot on so far but I can’t get over the clear image from this cheap little camera. I wish I had found this several years ago. Time will tell how it holds up but it looks as good of quality as the OEM one so I don’t believe it will have any issues for quite some time. I will update the review later if I do run into any issues.

Just installed this on my 2013 F150 4x4 Platinum, and it is working great. Picture quality is as good as stock if not better, and I've been thru a few days of Rain and the lens didn't get foggy. I'm very happy with this purchase

All in all this is a good aftermarket replacement camera that is mostly plug and play in my 2016 Lincoln MKC. After replacing the original OEM camera, model # EJ7T-19G490-AC with this one, I had a clear display, the red/yellow/green obstruction warning lines, and the black dashed centerline. As others have stated, the Zoom feature is lost (nothing happens to the display when plus is pressed). A few important details to note: 1. As shown in the photo, the OEM camera had 3 notches (shown in the red circles) that fit into small plastic pegs in the Lincoln camera holder. The Dasbecam lacks those notches and would not fit. What I had to do is cut the pegs in the Lincoln body part and then the camera fit perfectly. 2. Sometimes the new camera shows a white set of lines that bend with the steering wheel and sometimes just the tri-color lines show up. I can't figure out what triggers the appearance of the white lines. The original camera only showed the tri-color lines. All in all this represents a superior value versus the Ford equivalent part and so far seems to do the job. Hope it lasts.

Installed myself on my 2010 F150 Lariat at night. Fantastic image even in low light. My display is in the rear view mirror. My camera sits within the Ford emblem on the tailgate. This is my 3rd camera so I upgraded the Ford emblem on the second camera which is removable without breaking the emblem cover. So getting only the camera was what I needed. The form factor had the exact size and notches to latch onto the emblem harness. Image had back up lines displayed like the original. I dont use these I just need to see the hitch when hooking up trailers.

I got this because my backup cam was only working intermittently. I added a picture of what the original camera looked like vs the replacement. You can see this one covers more area, though the lines aren't perfect. A lot of people in the reviews are complaining about the lines; Im pretty sure to fix this you'd have to reprogram the camera. I have the attachment to hook my laptop to the truck and may try to get a trial version of Forscan to do that later. Personally, I don't really care because the lines at least point straight back and I don't use them anyway. I did make sure my wheels were pointed straight forward before making the repair; not sure if that's why they aren't curved like they are in some people's reviews. I'm just happy I made the fix for less than 50 bucks, rather than what the dealer would have charged. Although I tried to take it off carefully, the Ford emblem still broke off. I just glued it back on with apoxy. Otherwise, this was a very easy half hour job. Take a picture of the camera in the bracket before pulling it out, so you don't put it in backwards.

This camera works just fine and offers a clear picture. The lines are not quite centered and cannot be be calibrated using Forscan. The software did not recognize the camera as being OEM so it does not calibrate. If you don't mind the lines being slightly off center, then this is a good inexpensive alternative.

Great quality. Easy install.

Not a good viewing experience on the screen. You can clearly notice curved edges, and the zoom feature from the original camera is lost. I definitely do not recommend this one. It’s better to get the original—even if it costs more, it functions correctly. The last picture shows the original camera (when it’s working), and it also supports proper zooming.

F150 2011. Purchased and installed. Worked perfectly and I now have a backup camera. Just be sure your model number on your camera matches what they say it works with and you should have no issues. Takes two mins to install.

المنتج ليس مطابق للصورة كذلك مقاسه مختلف احتجت اعدل عليه حتى يتم تركيبه

Fits like OEM however the actual picture is like 720p .. it works so there is that and the installation was a piece of cake !!!

I've searched online, and talked to the dealership; most say that the part numbers for the rear camera are not interchangeable. My specify part number is CL3T-19G490-AD. This product lists my part number in the description and that it fits 2010-2014 F150. I was a bit skeptical, but decided to take a chance and order it since the seller apparently offers a money back guarantee. The part I recieved didn't have a part number on the actual camera, but the box started BL3Z-19G490-B (pictures attached). I hooked it and it works! At a quarter of the price of an OEM replacement from the dealership, I'm giving it 5 stars! It doesn't sit exactly center in the mount ? Picture attached) but I don't really care due to value. The image quality is decent (picture attached) and is accurate, at least to my eyes.

I knew that this might be a bit of a gamble but I figured it was worth the try. I installed the new camera with the help of a youtube video which was fairly easy. I tested it out, the picture wasn't quite as good as the stock lens but it was definitely good enough to do the job and worth it for the savings. I started to have an issue with it and wasn’t sure if it was something to do with the wiring with the camera itself but Luna from customer service was extremely helpful and ended up helping me problems solve the issue I was able to fix on my own. She then sent me a new camera just to be safe. Everything is working great now. I must say I was very happy with the Customer service. Thank you Luna