V-Guard VCB14-F030 Automatic Water Pressure Pump For Hot Water Circulation | Compatible With Washing Machine, RO, Shower | Energy Efficient | Compact Design | Multicolour

I had a problem with my washing machine — the incoming water flow was very weak, which made the wash cycle take almost 2 hours, and even then, the clothes weren’t getting cleaned properly. The service technician recommended installing a pressure pump, and I decided to give it a try. The difference is unbelievable! 💧 The water force is now perfect, and the wash cycle time has been reduced from 2 hours to just 1 hour — exactly half! The best part? It’s completely silent! I honestly expected a motor sound, but there’s zero noise — not even a hint of it. You wouldn’t even know it’s running. Just make sure you get a good plumber to install it properly and in the same direction as I’ve done. Once installed correctly, it works like a charm. I’m genuinely happy with this product — powerful performance, total silence, and super-efficient! Highly recommended! 👍

Got this for our washing machine as the inlet water pressure was too low. This fixed the issue and it is completely silent. It turns on and off super fast, minimising the power consumption. It is small so can fit anywhere. The switch is slightly different than the toggle type switch shown in the product detail page. My model came with a red push switch. It is automatic by default. And for manual operation it needs to be held down for 10 seconds. I used it with the default auto mode where it starts and stops as soon as it detects water flow. My main concern and complaint is the pump did not have a mounting bracket included and I had to make one by the local blacksmith. Positioning the pump upright with the shaft horizontal is really important. Also you need to take care of priming it full of water for the first time. The manual was clear about the instructions.

Dear Team, I am writing to report two major issues with the motor I purchased on 16 April 2026: 1. *Missing operational modes*: The motor does not have the three modes shown in the product video: manual, off, and automatic. Instead, only a red push button is provided, as seen in the attached photos. 2. *Low water pressure*: There is insufficient water pressure in the kitchen and washrooms, which are the primary areas for which the motor was purchased. Due to these issues, the product does not function as advertised and fails to meet our basic requirements. I am not at all satisfied with its performance. Since the 10 day replacement window is still open, I request an immediate replacement with a properly functioning unit that matches the advertised specifications. Please confirm the next steps at the earliest. Thank you.

Fantastic best product I have ever bought on Amazon. This water pressure pump best suited for low pressure households for washing machine. My washing machine used to take upto 2 hours for a 45 minutes wash cycle due to low water pressure. After installing vgaurd water pressure pump.. the cycle limits to the desired duration and exactly takes 45 minutes as per the wash cycle. I can evidently see the water pressure increase and visibly note how fast the water is gushing through the inlets. Best Buy! Saving time and electricity..

Good product

This product does its job perfectly. I was having issues with my geyser not providing enough water pressure, which made it difficult to take a warm shower. I honestly didn’t expect it to work this flawlessly. The automatic mode consumes virtually no power when idle- it only draws around 120 watts once the water starts flowing. This makes it efficient enough to run on an inverter without overloading it, which is perfect for my use case. The build quality is excellent—it’s solid, heavy for its size, and feels very durable, especially for the price. It has significantly improved my water flow to just the right level, and there’s been no leakage at all. Just make sure to use Teflon tape when tightening the pipe connections! One thing to note is that it doesn’t come with a mounting bracket, so you’ll need to figure out your own mounting solution while following the guidelines provided in the manual. I haven’t tested it directly with an overhead tank output, but when used with my geyser, it delivered exactly the results I wanted. Overall, it’s absolutely worth it for the performance and value it offers.

This product is working. It increases pressure. Automatic function with red button works well. But it heats up too much while in function. When you open the hot tap of geyser, it starts in 5 seconds, when you close the tap it closes. BUT, if you open the cold tap first (not connected with pump), and then the hot tap(connect in line with pump), the pump will not start at all. Anyways for now it’s fine and manageable but i really doubt the quality of this Chinese product. The excessive heating will surely fail this product in some time. I think its better to go with CG one. Also its seems like a use n throw type product. Bought in 4k.

Motor is good. It is only 2 days old I installed motor for pressure requirement for washing machine. But it does have base bolting system to anchor on wooden plank.