OVERTURE TPU Filament 1.75mm Flexible TPU Roll, 95A Soft 3D Printer Filament, 1kg Spool (2.2 lbs), Dimensional Accuracy +/- 0.02 mm(TPU Black)

As with all the other Overture filament types I've used, this TPU is up there in quality, ease of use and the final finish.Moisture level was low out of the packet, which is really important for TPU. Although it didn't need drying due to it being dried before being packaged in a vacuum sealed bag, with TPU being so absorbant, I threw it in the drier before use anyway.Used on a Prusa MK4, using flex profile, this printed amazingly cleanly straight out of the box. No additional retraction settings needed. The quality of the prints is right up there with all thr other Overture filaments I've used and is now my go to brand, buying from UK.Make sure you use a textured sheet as adhesion is really high. The colour is true black and a nice balance between glossy and matt finish, but this will change based in your print speed, temperature etc, so your mileage may vary.Overall, very well priced for TPU and up there in quality and functionality compared to other Overture filaments I've used. Very happy with this brand and this TPU

The media could not be loaded. This TPU is exceptionally user-friendly, exhibiting neither stringing nor blobs. Its accuracy is commendable, and it functions flawlessly with the Bambu Lab generic TPU settings. Additionally, it is jam-free, demonstrating remarkable elasticity and resilience. Considering its overall value, it is a worthwhile investment. Furthermore, its color is aesthetically pleasing.

This TPU isn't in the same category as the generic Sainsmart / Eryone type filaments.I had to make a few tweaks to my standard profile to get to a point I'm happy with it. It needs to be about 10 degrees hotter at the nozzle and it needs cooling at about 40-50% or it curls up. I also had to slow down supports not because of clogging but just because they were too weak if I didn't.As it's a matt finish it's less forgiving than the translucent type. Imperfections stick out so you really need to tune things for a nice surface.The feel does seem more squishy than the 95 hardness rating implies. It stretches and deforms more than my standard TPU's but isn't quite as elastic as the old flex filaments.The colours look nice and I may buy more in future as I do like multi colour printing.All in all, slightly expensive, slightly harder to print but nice looking with a nice feel.

Amazing to keep it all feel that meant nice colour. Nice layer sticking to bet not working. No flinink, just fantastic, just pleasure to print

Nice prints, super flexible, recommended.

TPU always prints really well in my machines, whatever the brand, this works just fine.

Prints well and is a strong material. Needs to be dried before printing.

I've used this brand a bunch, tried different filaments and colors, and it's usually been great. But this time, the filament was super brittle, breaking all the time and messing up my long prints. It even got tangled in a 4-hour print, which was a huge letdown. I grabbed another roll, thinking the first one was just a dud, and hoping for the usual quality.