Bean Sinker Mold With 5 Cavities and 1-Ounce How to make sinkers: 1. Ensure you are wearing protective clothing and all care must be taken when heating and pouring lead. 2. Put scrap lead into saucepan and heat until molten (lead will normally melt at 650 degrees). 3. Once lead is molten use a cooking spoon to take away any impurities that have risen to the top. 4. Take your coat hanger wire (wire is only used when making sinkers that require a hole in the centre) and place within the mould. 5. Using the tongs grab tour mould carefully and have the pouring cavity facing you. 6. Pour molten lead into mould until cavity is full. 7. It is recommended the mould be preheated before use. 8. Once mould has been heated up and your lesd is fully molten and clean you can proceed to pour the lead in to the cavity. 9. Wait 10 seconds and using pliers pull wire out then proceed to open mould. 10. Using your pliers snip the excess lead of the top of the sinkers. 11. Good luck and remember to always take care. 12.When disposing of unwanted lead please take note of your local authority about appropriate methods. Warning: 1. Lead is a toxic material 2. Use PPE when handing moulds 3. Use dry moulds as water can cause molten lead to explode
| Brand | Adygil |
| Color | Silvery |
| Material | Lead |
| Item Weight | 0.3 Kilograms |
| Shape | Drop |
| Number of Pieces | 4 |
| Recommended Uses For Product | Bottom Fishing, General Fishing |
| Manufacturer | Adygil Fishing Tackle |
| UPC | 667016086468 |
| Item Package Dimensions L x W x H | 10.24 x 3.94 x 0.79 inches |
| Package Weight | 0.3 Kilograms |
| Item Dimensions LxWxH | 7.28 x 1.3 x 0.87 inches |
| Brand Name | Adygil |
| Suggested Users | mens |
J**.
Good for the price
The mold itself worked i had to make the holes a little bit more bigger for the lead to actually pour thru easier also when you put the wire thru the mold the sinkers stick to it its hard to pull them out i found it more easier to use the drill and hook it up to the wire and turn it eather way and pull at the same time makes the job alot easier other than that it does its job .
M**.
Don't expect high quality.
Judging by the price I expected issues, and was correct. Fortunately for me, I only need a basic moldThe mold isn't made to "exacting" tolerances, so the sides are a bit loose when together. And unless your coat hanger is of smaller diameter than mine, you'll need to find a metal rod that will fit in the square ( really?) rod channel.
Trustpilot
1 month ago
1 day ago
