DremelMM600 Multi-Max Rigid Scraper, Black

Not much to add here. Love my cordless Dremel oscillating and this attachment works great. Have the flex, too, and combined I haven’t run into a job they don’t make easier.

Great help in removing old, moldy calk from shower stall.

These are well made but expensive in comparison to the large packs with adapters that you can buy on Amazon. You are better off buying the large quantity packs of cheaper ones & will get much more work done because of the amount of them for the price.

Although a USA based company, the item is manufactured in China, not in the USA as advertised.

A great tool for removing stubborn floor tile and linoleum. It made quick work of an old floor in an old room I'm remodeling. (Note that getting all of the old glue out from underneath is a separate job!) Be careful not to use it for prying up tile sections; use a separate tool or your hands for that.

I used this to scrape up mortar on a subfloor after removing tile. Worked really well. It did get a little annoying that the blade wore down at an angle, so I had to start holding my tool at a weird angle, but that probably was my fault. The blade doesn't last a terribly long time, you may need multiple depending on your job. I used it for about 2 hours and it probably has another hour left in it.

Bathtub caulk mold has tortured me for many years. Scrubbing and spraying Tilex on it makes the top white but the black mold is still visible just under the surface, which is sickening. Also embarrassing; my brother in law made comments. At the hardware store I was advised to scrape up the caulk and put new caulk down, and they sold me a $5 hand tool to scrape with that does not work even a tiny little bit and was just super depressing. I got a MultiMax for other projects but noticed in online videos that you could use it to cut caulk and so I bought this blade to give it a try: I dominated that caulk! I sliced it all out, easily and quickly! I was so happy!!! I will never be defeated by caulk again! One word of caution: I call this thing a "blade" even though they call it a "scraper" because the edge is very, very sharp. It has a knife or possibly a razor edge. I did not expect this and so when unpacking the hard blister-packaging (that in itself is dangerous), I sliced my finger on the blade and was a little shocked that it was so sharp. That doesn't dampen my enthusiasm for my MultiMax and this accessory. I love them.

I purchased this to remove dried window glazing using my DeWalt 20 Volt XR oscillating tool. The blade appears to be high quality but does not fit in the DeWalt tool. The DeWalt shaft is larger diameter (about 10MM) than the center hole /slot of this blade (about 8 MM). I was going to return it, but I liked the flex of the soft blade, so I used a Dremel rotary grinder to enlarge the center slot to about 10 MM to match other blades, and it now installs OK. Good blade if you have a smaller diameter shaft tool; do not buy if you have a DeWalt tool (unless you want to grind to down to fit).

I used it to scrape old paint. Works really well.I tried paint remover liquid earlier, that didn't work. This dremel attachment saved me from scrapping all day long.

Livraison rapide bien emballée correspond parfaitement

Muy útil

Perfect for removing caulking and glue from tubs and drywall.

Muy bueno..