EVIL ENERGY 5/16 Fuel Hose Line Push Lock NBR Rubber SAE 30R7 10FT 300PSI

The EVIL ENERGY 3/8" push-lock fuel hose has worked very well in my application and has held up without issues. I used it with an oil catch can setup and ended up redoing all of my PCV lines with it. It was especially helpful when swapping valve covers, since replacing all the old hoses at the same time made everything fit cleaner and eliminated brittle, worn factory lines. The hose itself feels well made, with good wall thickness and a quality rubber compound that doesn’t feel flimsy or overly soft. Installation was easy—the push-lock design fits snugly over barbed fittings and seals well without being a fight. Once installed, it stays secure and doesn’t feel like it’s going to slip off under vacuum or pressure. Routing was straightforward, and the hose bends cleanly without kinking, which made it easy to run through the engine bay neatly. In real use, it’s held up well to heat, oil vapor, and normal engine bay conditions. There’s been no cracking, swelling, or softening, and it hasn’t developed leaks or odors. Overall, this is a solid hose for the money. It made redoing the PCV system and valve cover swap easier, works exactly as intended, and seems durable enough for long-term use. I’d definitely use it again.

Bought this to rebuild a hose on my truck after the dealer wanted to charge over $100 for it. The line worked perfectly, and the fix only cost about $10.

Quality fuel line! Much better than the cheaper junk out there. Well worth the cost

More length than I really needed, but I ordered this to replace a fuel vent hose on a 56 Plymouth. Original hose was 70 years old and had finally rotted enough to leak gasoline when the tank was filled. This hose fixed that. Easy enough to cut to length with a box cutter, but very strong reinforced hose. Should last another 70 years, although I won't live long enough to find out.

I’ve used this brand for my lawn tractors before. Resistant to ethanol gas and fits well. For my car I use the #9.

1997 Toyota T100 4x4 SR5. Replaced the low pressure side power steering lines, the hose fit perfectly except for the one by the pump which wouldn't go on the flare fitting, I soaked it in hot water for 30 seconds and got it to go on with no issue's. The quality seems fine and I'm happy with the results. Just a surfer's view. Go Canada!

This 3/8” rubber oil line hose has changed me as a person. First of all, it’s a hose. It knows it’s a hose. It doesn’t try to be anything more. No Bluetooth. No app. No subscription fee. Just raw, unfiltered hose energy. I bought it to transport oil, and you’ll NEVER guess what it does… It transports oil. Flawlessly. No leaks. No drama. No mid-life crisis halfway through the install. Just sits there handling 200°+ existential dread like a champ. The rubber? Flexible but not “floppy noodle of disappointment” flexible. Firm but not “PVC pipe that skipped leg day” firm. It bends like it actually wants to be there. Installation was so smooth I briefly considered writing it a thank-you note. Slid onto the fittings like it had something to prove. Clamped down. Sealed tight. Didn’t even look at me wrong. I ran oil through it and it didn’t: -Sweat. -Complain. -Explode. -Text my ex. 10/10. Would trust this hose with my engine, my finances, and possibly my firstborn. If you need a 3/8” oil line hose that wakes up every day ready to do hose things — this is your guy.

This is some of the best fuel line I’ve used. It was very easy to cut to size and get fitted to what I needed. Its still very flexible even though it has stronger walls then most hose. Installed onto my LB7 fuel filter housing and had no issues.

Good Product we used it for our formula Student car as a fule lines

Well made as described, great quality would buy again

Good quality fuel line

Item exactly as described

Works as advertised.