EAP615-Wall | Omada Business WiFi 6 AX1800 in-Wall Wireless Gigabit Access Point | Support OFDMA, MU-MIMO & Beamforming | PoE Powered | Support Omada SDN | Cloud Access & Omada app

Great access point and range for indoor use. The white status LED is not too bright at night and the 3 ports on the bottom are great for connecting additional devices if needed. Easy to mount to a standard single-gang electrical/data box. This was installed as part of an Omada deployment for a campground guest WiFi network that was replacing aging/outdated Ubiquiti equipment. Coupled with outdoor WiFi 6 EAP610s, these indoor units were used in trailers and campers that had weak signal from the outdoor units. Overall, these are great APs for short range needs like single rooms and small areas and works just fine. However, there is an overall flaw with all Omada APs regarding guest networking that was confirmed by TP-Link engineers that is important to note. TP-Link Omada access points of any flavor do not support Layer 2 client isolation. Even with guest network settings applied in the controller (or on the AP itself if using standalone), Layer 2 communication between clients still works despite not being able to ping those devices or reach any kind of a webpage or open port. While the guest settings do block the above types of client access, multicast packets still flow freely and everywhere. As such, our guest campground network let anyone anywhere wirelessly cast their screen via AirPlay, Google Cast, or Miracast to anyone's unsuspecting smart TV without warning. That is a huge security issue not to mention asking for problems to occur, so unfortunately I was left no choice but to return all of the Omada units and return to Ubiquiti equipment. With that being said, if that is not an issue for you, they work great in any other environment that does not require L2 isolation. they boot up incredibly quick, offer good signal and speed, and overall are a great product for the price. After escalating this issue with support, I was eventually put in touch with their engineering team running diagnostics with them and submitting Wireshark logs to get to the root of the problem. They said it would be added to a list for future firmware development, but I cannot wait for that to happen. It was upsetting to leave TP-Link because I know for a fact I would not get this kind of support with Ubiquiti (part of the reason I was trying to leave that ecosystem), but I didn't have much choice.

Easy setup. Strong signal. Omada controller manages them great. FYI: I ordered three, two were US version, one was Canada version. Unsure if there is any practical difference but they have different firmware versions.

I don't have any .ax clients yet and I mounted both the UAP-IW-HD-US and 615 APs on the same wall box with the same network. The TP Link is 50 to 100Mbps faster to my Wifi 5 clients and has better antenna coverage to my far clients in a dense wifi area. I almost bought a second UAP-IW-HD-US until I started reading around and saw the 615 is like half the cost, so I bought two. I wound up installing both 615's but it's probably overkill in my case. One 615 was connecting fine to clients that the UAP-IW-HD-US could not. The UAP-IW-HD-US's antenna coverage doesn't seem to be very good at the edges. I wonder if the metal trim on the cover has a negative impact. A lot of people like the Ubiquiti console but there isn't a compact low cost stand alone console like the Omada system offers. I haven't tried Omada cloud yet, but it looks more straight forward. I don't need Omada Cloud or controller yet as the standalone mode with the app and logging into the AP's IP works perfectly for me. I set one to 5G and the other to 2.4G. If I ever need a new wired router I will try the Omada model and the controller unless the cloud is free. Currently, I use an Ubiquiti ER-X 5 port router with the HW routing enabled and it's a great little router. After that I connect the TP-Link TL-SG2008P for my cat5 outlets and to power the 615's. I just pulled 390Mbps over the air to my 2015 MacBook Pro. The next .ax version of the Ubiquiti should be faster, but until then there are better options, and even then the price premium for Ubiquiti doesn't seem worth it unless you need that ecosystem. The 615 is fast and great for a home application like mine - love having no router around the house taking up space. Before this upgrade I had a Nest Wifi and it was fine. The Nest wound up devolving to a state where it would be so slow and it wouldn't recover without a power cycle or for many hours. I'm pretty amazed how much faster the TP link 615's are.

This access point works well in a home setup. I got 3 units and a TP-Link 8-port switch (SG2008-PE with 4 POE+ ports) to power the devices. The form factor is excellent. I run a self hosted Omada software controller on a Linux VM. Did not sign-up for Omada cloud controller (even though it was offered for free, but might be an option for people who don't want to self host). Omada app on mobile is fluid. Under normal usage (AP power profile set to high) each unit consumes less than 5W. I would give it 4.5 stars because of the following reasons which are not deal breakers: - the AP performance degrades with multiple SSIDs (3 or more) configured - roaming between APs is not seamless even though the controller offers a couple of options to improve that

First, the minimal packaging was fantastic—eco-friendly and efficient. Installation and setup were a breeze, including the mesh configuration. The three Gigabit ports, including one PoE port, are a great feature. This AP solved my Wi-Fi issues without requiring an additional switch or PoE switch. Since I only needed to connect it to a Zigbee hub and a workstation, I replaced my five-port PoE switch with this AP. I simply moved the switch port to the PoE port to power the AP, and it worked perfectly.

Got excellent speed and range. An easy device to install. Wish it was offered as a router with firewall & DHCP

eap facil instalacion, discreto y practico, facil manejo gracias a omada

Nearly perfect WiFi access point for villa or large apartment when you need fast and stable WiFi in every corner. With this access point and Omada controller you can achieve seamless roaming between multiple access point distributed. It also provides enough wired ports to connect your wired devices

As with other TP-link wall access points, this one performs well, having good range despite being small and fixed next to a metal wall box. It provides as much coverage as the larger Tp-link ceiling access points. It's a 3-port switch as well. Perfect for upgrading an office, home or work, from a single network point. Also, with a few of them, a jolly neat way of providing coverage in a larger house. The only reservation is price but I suppose TP-link sets it at that level because there is simply no competition.

Installed two of them on different floors of a three story town house. Initially tried just one but coverage wasn't enough. Installation is quick an easy into an existing outlet box and the box itself is discrete. The LED on the front can be disabled as well. A POE supply isn't included but required, I purchased a tp-link 4 port POE+ switch to power them. With the two running and adopted into an Omada controller WiFi coverage is seamless, updates are quick and easy and management is centralized. Without the controller running coverage was spotty but they still work fine in standalone mode, client devices just took longer to switch between AP's. The Omada software controller is pretty heavy software, uses a lot of RAM for what it is (I run it in a Proxmox LXC) and installation is difficult/poorly documented. The AP's support SNMP polling as well, so 3rd party software can be used to monitor traffic if preferred. I much prefer these to running a higher power centralized WiFi router.

Good product 👍🏻