Thixo (185ml Cartridge) | Thickened Epoxy Adhesive | for Bonding, Gluing, Sealing and Filling | Use on Wood, Fiberglass, Metals, Brick, Stone, Glass, Tile & More

Easy to use. Managed to fill in several small below waterline screw holes from a transom mounted transducer on my boat. Applied acetone on a rag, got rid of any old 5200 gunk that would interfere with the thickened epoxy, reamed the screwholes, screwed the mixing tip on, laid about a foot of the first mixed epoxy on a cardboard box to prime it, and then began filling the holes. Set in about a day. Great repair. Great product. Came with two tips in case I need to do another hull repair in the future. 10/10 would recommend.

I needed an adhesive for a R/C crane barge project that I am working on. The bottom and the deck are very large, so I needed something to glue 1/8th inch plywood down to the frame, that was not going to set up on me while applying the glue and it had to be applied to the frame stiles with accuracy. I found out about this stuff at Jamestown Marine and it sounded like just what I was looking for. It is applied with a caulk gun and the mixing tips allow pin point accuracy to apply however much glue you need. It is slow to cure, is thick enough so it does not run all over the place, and it sands ease when cured. PERFECT!!!

Don’t be fooled. The product is great But it’s only half a tube of product. A little bit of epoxy for a big price

works great! very expensive and maybe deceiving ? thought i was buying full size caulk tube, ends up these are only 185ml where as a standard caulk tube is 300ml. didnt make halfway through a tube and she was already empty! shocker until i read label! shame on me... wont buy again because of cost. There are other suitable brands for better value.

Second time to purchase. Used to fill voids, old screw holes and attach top cap to hull. Does not sag, sandable when dried and easy to use. Only down side is when using a regular caulk gun you really have to apply pressure so it mixes in the tips provided.