10PCS 3Pin 10mm Wide Single End with 15cm Long Cable LED Strip Solderless DIY Connector Adapter Conductor for WS2811 WS2812B SK6812 LED Flexible Light Can't Support ALTOVE LED Strip

These are the hidden heros of my kitchen LED strip light install. They allowed me to do tight corners with ease, get rid of gaps and make the install look perfect when I was done. They work exceptionally well, and give you the ability to install FCOB strips in places you might not have been able to if you were not willing to cut the strip. Amazing product and value. To install you simply insert the strip on the correct sides, then use pliers to complete the connection. The bond is very durable, however it is NOT waterproof, so not for damp or wet installation areas.

These were the only solderless connectors I could find that would fit in the diffuser channel I had. Crimping them can be a bit of a challenge. In theory, you put wires in one side and the LED strip in the other and just crimp down with pliers. In practice, you have to be careful because if you don't crimp straight down, the metal tab will bend sideways instead. Having extra wire in the package was a plus, but I would have liked more wire-to-strip connectors instead of strip-to-strip. They were still a time saver and U avoided needing to solder strips together.

Needed to make it 90° turn the plastic lips did not work however I was able to use the 90° brackets in here to solder the 90° turn

Absolutely terrible product. I purchased these with some BTF WS2182B lights. First off, I purchased 2 packs and of these and neither pack came with any directions. All you have is the images and video that is offered on this product page. Nothing written. Secondly, the package also comes with 4 screws (???????) and 4 clear rectangular pieces that have adhesive tape on one side of them (???????). No idea what these are for and absolutely no explanation whatsoever. They're not even listed in any of the pictures on the product page. I tried the first connector, the strip to strip connector. Easy enough.. insert the two strips and they should light up. NOPE. Strips are cut right on the lines as indicated and nothing. The strips EASILY come right out of the connectors. There is nothing to hold them in place. The metal conductors on top of the strips do not move or press down or anything. There's no way these connectors are making contact with the strips. I tried the wire to strip connectors, again same thing. The conductors are making no contact and nothing to keep any wires or strips in place. They just fall out and nothing to crimp them down into place. I ended up purchasing a 3 pin 10 pack wire connector set from RGBZone. They worked GREAT. VERY easy to use and they come with connector covers that you crimp down to keep everything connected and in place. The only downside is that they are kind of bulky. I also purchased a spool of 22AWG wire. Everything setup perfectly and lights work great. Setting up a return and hopefully can return this item. AVOID THIS PRODUCT.

Updated review and rating with my issue and solution. This will help new buyers trouble shoot. Should be an easy set up but what a pain. I couldn't get a good connection no matter how many times I tried so I'll be soldering mine. Wanted to try an easier solution but this didn't work. Update: Finally got the conector to work. I used the piece to connect 2 strips together with no wires. I had several issues for future buyers. First it was a pain to get my leds connected to Strips I already had taped down and I was standing on a ladder. You have to firmly hold both strips inside the connector befkre you press down on the metal blades. The issue I had was the 3 thin pieces you squeeze down will bend if you don't do it perfectly. If just one bends then you won't make a connection since the metal piece won't be long enough to touch the led strip pads inside the plastic piece. It will look like it's enough but for me it wasn't. I redid this 3 times and on the 3rd I was so mad I took the pliers and squeezed so hard on that part trying to break it. We'll it worked 😆 if this didn't I was going to toss this in the trash and soldier my strips. So lession learned, don't bend the 3 gold colored blades when pressing down on them. All 3 have to go straight down into the chanel. If you do that and still no connection look at your connector sideways and see if any of the metal blades are sticking up more than the others or see if one is slightly bent so that one blade isn't long enough.

I almost gave up on these bc they weren’t biting my 18ga wire. But after adjusting strip length so that the wire jacket was in the hole a bit and folding over my leads so the were bulkier, they started working like a charm. even bought a solder iron after initially failing at using them… thank god I didn’t actually have to go that route. Once you get the hang of how they want to receive your wires, they are absolutely priceless! Saved so much time!

Good clips. Holds very well. Makes good connections.

I picked these up for a project where I needed to take LED strips and make corners to form a rectangle. They made the project SO MUCH EASIER. The only issue I ran into is that they are a little flimsy so it's a bit easy to accidentally bend one too much to where it's hard to slide into the little prongs on the attachment points, leading to some "fiddling" (a technical term for sure) to get them to connect right. That's more the exception than the norm while using them though, and certainly worth the trouble for the time and effort saved.

Muy buena calidad por el precio no encuentras nada mejor

Compré estos conectores para evitar tener que soldar las tiras led sin embargo, no sirven de nada, al realizar la conexión parece ser que no hacen bien contacto ya que las tiras no encienden. pésimo producto

tight fit.. zero issues

Utili come congiunzioni per le strisce led.

Ces connecteurs sont pratiques et faciles à utiliser pour connecter des morceaux de bandes leds. En revanche ça revient vraiment cher pour connecter un tas de leds individuelles. Il vaut mieux alors se tourner vers le soudage.