Atlantis Rail Easy S0980-R004 SS RIGHT Hand Lag Screw Stud for 5/32" Cable-10 PK

Absolutely love Atlantis Rail Easy product. My first ever attempt at cable railing came out brilliantly. This stuff will make you feel like a pro, even if you have never done this before. I replaced my old 80's interior hand railing with this stuff and cannot believe the difference. I had six different sections, and about 65 linear feet of railing to replace.All of that hardware doesn't come cheap. Here area few tips if you want to save some $$$...Go with four inch spacing instead of three. Technically, this meets code and to me looks more natural.Reuse your existing posts and top rail if they're in decent shape... I added a reinforcing 2x2 to both top rail and bottom to beef it up. Mainly for aesthetic purposes. Added bonus is that they also cover all the ugly holes from the old balusters.Pre-drill your holes on a cheap yard stick and use it as a template going forward.Go with a gel-stain if you need to refinish your rails. That will keep sanding and prep work to a minimum.Use Left-lag and RIght-lag anchors for shorter runs. They're cheaper than threaded tensioners and I was able to finish three shorter (six feet or less) sections of railing easily in this manner. I put the rights on the right side, lefts on the left side, put them in about half way, cut cable and took turns tightening half a rotation on each side at a time. Note if doing this... Screw the right side in a couple rotations more to account for locking the cable down (both cable clamps are right hand tighten and this will allow you to hold the locking nut while 'loosening' the lag... thus tightening the anchor).If you are considering this... go for it!

Good system, overall.

These worked very well with 5/32 cable. See picture.

Worked perfectly with the Raileasy cable. Used the swivel end or adjustable end on the opposite side which switch to prevent twisting the cable but realized the left hand version would have also worked on the opposite end.

Too expensive

Expensive. But very well made. Looks like it will hold up for years.

Love these because you don't have to drill all the way through your wood post. They just lag into the post which is way easier.

These are made in China, no markings on packaging and do not appear to be the same quality with the Atlantis Rail packaging.