Hooke Road Wrangler Hood Protector Bug Shields Deflector Guard w/Amber Lights Compatible with Jeep Wrangler JK & JKU Unlimited 07-18

Adhesive won’t hold even tho it seems Hulk solid at 1st. I bolted mine & it’s awesome. Beefs up the front end so much plus it’s the one item most Jeepers DONT HAVE!

This product is easy install but out on the sun peels off the hood and it’s no way to get it to stay on please all the glue just melted I screwed and look fairly good but again In hot sunny day pops up In between the screws ready bad material

Fits almost perfect but bows on the corners n florida heat had me permanently mount it since the 3m didn’t hold n neither did replacing Over a year before one of the LEDs burnt out but still going

I had this on my 13 jku and it was plug and play Well now the 2020 gladiator was a challenge because all the fuses are micro fuses, so I bought a micro fuse adapter and found power in the cigar lighter, works great now

The lights were solid and looked fantastic. However, after months of struggle and multiple automotive double sided tape rolls, i have finally given up on this thing. It is cut extremely bad so that it does not sit on the hood evenly. Both sides pop up. I used 1 inch thick automotive tape and c clamps for a week to try to get it to stay and it simply would not. While it looks good from the front, it looked like awful craftsmanship from any other angle. I had to eventually pull it off. Really disappointed.

Upon receiving the bug deflector for my 15 Jeep Wrangler Sport JK I placed it on the hood seemed like everything was going to be fine. After cleaning the hood and then wiping it down with alcohol I also sprayed adhesion promoter for the 3M tape to stick to. I removed the backing from the two-way tape applied Heat just to warm up the glue on the 3M tape and clamped it down overnight. When I took the clamps off the next morning about a day later the tape started releasing and it slowly started popping up because it is not formed right from the factory to rap on your hood tight. So I then took some two-part epoxy cleaned the inner lips again bonded this thing down and clamped it again overnight. About a week later it started popping up again so now I guess I'm going to have to bolt it right through the roof. Very disappointed

Love this deflector! Distinctive look, easy install. Even with the amber lights, the product is very light weight. If you’re a novice DIY’er, no worries! Just follow the instructions as is and you got it. This is almost plug and play with the exception of the ground wire which you’ll have to decide what metal surface works best for you. I spliced to my light bar ground to the battery. Works great! Installed by myself but would recommend you have a second set of hands to help ensure you mount evenly on your hood.

Twice now, I have cleaned and prepped the surface. And applied to hood. The factory adhesive let go after two days from the corners I cleaned removed the 2 sided tape and installed new 3m automotive grade tape. This lasted two days and lifted in the center windshield side. Very unhappy 🙁