Enerwave ZB15R ZigBee Outlet, Smart Outlet, Wireless Outlet for ZigBee Home Automation, ZigBee Wall Outlet 15A Duplex Receptacle, Interchangeable Face Covers
Product ID: 44191193
Product description Enhance Your Smart Home with Enerwave ZB15R ZigBee Wall Outlet Experience ZigBee home automation like never before with the Enerwave ZB15R ZigBee Smart Outlet. This smart outlet replaces a standard wall receptacle to enable wireless control to your home or office. Like other ZigBee dimmers, sensors and switches, the ZB15R outlet must be connected or paired wirelessly into a ZigBee home automation system gateway. The pairing is easy and simple. Once the system is paired, functionality, efficiency and the value of your home will improve. Remotely control appliances using an internet connected device or program an event to automatically power devices! Never again worry about forgetting to unplug mobile devices after charging them or to turn off a fan, floor lamp, heater, or speakers. Replacing a standard wall outlet with this ZigBee outlet helps cut down on the energy bill and improves safety. Offering more than just ON/OFF control, this smart outlet can be added to a custom scene or group of appliances to be controlled simultaneously with other ZigBee devices. Modernize and upgrade your house for greater convenience and smarter control of your home. Make the smart choice when it comes to home automation with ZigBee ZB15R ZigBee receptacle has a blue LED to indicate the status of the controlled outlet and act as a night light for easy locating in the dark. The bottom outlet is ZigBee controlled with programmable functions, and the top outlet is always on to power your devices. Featuring a tamper resistant (TR) design, both outlets prevent the insertion of unwanted objects for better safety. This ZigBee TR duplex receptacle complies with ZigBee standards and FCC regulations. Three extra click-on face covers are included in the box; white come preassembled, black and light almond are switchable options. With easy installation and pairing, your home can be smart, energy-efficient, and secure with Enerwave ZigBee outlets, dimmers, sensors and switches! ZigBee is a wireless protocol that allows you to remotely and securely control everyday devices. It creates a wireless mesh network (WMN) for interoperability between ZigBee controllers and devices, so products with the ZigBee logo work smoothly together. ZigBee technology uses this multi-hop mesh networking to expand network reach and improve accuracy. Add Enerwave ZigBee devices to your ZigBee hub for smarter control of your home today! Note: ZB15R is compatible only with Smartthings and Orvibo ZigBee Hub. Review: Works great, needs special setup for smartthings - I have multiple zigbee networks so i tried out a couple setups. It Works with harmony elite extender, however a little slow to respond. Then i tried with linking it through harmony via smartthings. Delay of course, was worse. The receptical is Not natively supported by smarththings through the app, but with a few Google searches and the answers identified in the other comments here on desertcart I was able to set it up directly in the smartthings zigbee hub by swapping the device handler in the smarththings Web ide. Now it works great. Response is within 1/4 second if not quicker. I actually ordered even more of these, putting zigbee outlet recepticals in each room and zwave wall switches for overhead lights and ceiling fans. Setup directly in smarththing is not for the naive, if you have some understanding of git and can copy and paste code, it's a 5 minute job. Review: Good device, just a headache to integrate... - I bought this device because of its supposed SmartThings compatibility. And although I was able to get it working, I had to jump through several hoops to do so. First, hardwiring the receptacle into my home, the SmartThings hub could not connect to it. Although it was closer than a GE Zigzee receptacle I have, the Enerwave did not show. On a whim, I connected an AC "pigtail" to it, plugged it in just inches from the hub and this time the SmartThings hub "saw it," even though the device was identified only as "Thing." I then went to the SmartThings web UI and had to manually edit the device. Finally, after some trial and error, because there was no troubleshooting documentation to be had, I got it working. Since then, the device has worked flawlessly. However, I prefer smart devices that work right out of the box.
| ASIN | B072Q5B9H7 |
| Amperage | 15 Amps |
| Brand | ENERWAVE |
| Brand Name | ENERWAVE |
| Compatible Devices | All |
| Connectivity Technology | Wireless |
| Customer Reviews | 3.7 out of 5 stars 7 Reviews |
| Manufacturer | Enerlites |
| Model | ZB15R |
| Part Number | ZB15R |
| Specification Met | FCC |
| Total Power Outlets | 2 |
| UPC | 883951460280 883951450281 |
| Unit Count | 1.0 Count |
| Voltage | 120 Volts |
| Wattage | 1800 watts |
J**N
Works great, needs special setup for smartthings
I have multiple zigbee networks so i tried out a couple setups. It Works with harmony elite extender, however a little slow to respond. Then i tried with linking it through harmony via smartthings. Delay of course, was worse. The receptical is Not natively supported by smarththings through the app, but with a few Google searches and the answers identified in the other comments here on amazon I was able to set it up directly in the smartthings zigbee hub by swapping the device handler in the smarththings Web ide. Now it works great. Response is within 1/4 second if not quicker. I actually ordered even more of these, putting zigbee outlet recepticals in each room and zwave wall switches for overhead lights and ceiling fans. Setup directly in smarththing is not for the naive, if you have some understanding of git and can copy and paste code, it's a 5 minute job.
P**Y
Good device, just a headache to integrate...
I bought this device because of its supposed SmartThings compatibility. And although I was able to get it working, I had to jump through several hoops to do so. First, hardwiring the receptacle into my home, the SmartThings hub could not connect to it. Although it was closer than a GE Zigzee receptacle I have, the Enerwave did not show. On a whim, I connected an AC "pigtail" to it, plugged it in just inches from the hub and this time the SmartThings hub "saw it," even though the device was identified only as "Thing." I then went to the SmartThings web UI and had to manually edit the device. Finally, after some trial and error, because there was no troubleshooting documentation to be had, I got it working. Since then, the device has worked flawlessly. However, I prefer smart devices that work right out of the box.
J**R
Doesn't work at all
I hate products that are subpar quality or just don't work. I have a Samsung SmartThings Hub and the description for this device says it's supported. I went through the trouble of taking out and replacing my outlet only to find that SmartThings could not discover it. I tried everything from moving the hub to confirming another ZigBee device worked from the same location. After confirming power, I followed the instructions to reset the device and exclude it from prior networks - nothing worked. What I realized is that there is no indication that this device is ZigBee certified -so it might not stick to the required ZigBee standards and has not been shown to work in a variety of ZigBee environments. My experience was proof of that. Too bad, there are not many in-wall ZigBee outlets to choose from. Guess I stick with Z-Wave or use a wall wart style outlet.
J**.
Compatible, not Supported
It took about 5 minutes to set up once it was exchanged for the outlet. Smartthings doesn't recognize it out of the box (it just shows up as a Thing) and you have to use the Smartthings website to change the device handler over to something else. I chose "ZigBee Switch Power" and it works fine with that. I suppose it could have other features if someone wrote a new handler, but the basic "on/off" works just fine. As long as it keeps working, I'll be totally satisfied with the product. To be clear: the description says that it is compatible with Smartthings, it doesn't say it is supported by Smartthings. There are very few Zigbee outlets, so it is great that this one works.
S**Y
Should have read the reviews first!
If you say compatible with SmartThings, my expectation is that it works out of the box. It does not, you need to install a device handler - no big deal, but the description should say so. There should even be a link or instructions, which there are not. It works. Shows up as "Thing" when it is discovered. Took me about 20 minutes of search to find the right device handler. This one worked best for me: on github - /erocm123/SmartThingsPublic/blob/master/devicetypes/erocm123/enerwave-zigbee-outlet-switch-zb15r-zb333-zb15s.src/enerwave-zigbee-outlet-switch-zb15r-zb333-zb15s.groovy I am happy with the purchase, just wish they had been more upfront with the compatibility. If so, would have been 5 Stars
P**N
Works Great!
Works Great, Please Read the Reviews for Assistance... I have Smartthings and it was a pain to find any instructions for this product and the user Manual is worthless, NOTE only 1 plug is controlled the other is always on, Not a complaint.... Just FYI.
J**N
Works as expected
Good unit. Works as should.
Trustpilot
2 weeks ago
2 months ago