Akfix360FC Fast Drying Wood Glue (1x15.4 fl.oz)- High-Performance D4 Polyurethane Adhesive, Waterproof Marine Glue, Strong Adhesive for All Wood Types, Metal, Concrete, Ceramic | 15.4 fl.oz. 1 Pack

First, the bottle comes half full, but the amount of glue in the bottle is exactly as advertised, 15.4 ounces. I'm assuming they add inert gas to the upper portion of the bottle to prevent it from air curing. This glue behaves and performs much like polyurethane Gorilla Glue, except that it is much quicker curing, a little more airy in texture, and not quite as strong.I preferred Akfix PA370 to Gorilla Glue when laminating wood sheets and working with large pieces, or edge gluing boards for a butcher block. On the other hand, if I were joining boards with rabbets or picture frame style corner angles, then I would recommend something with a little more strength like Gorilla Glue or regular wood glue.Akfix PA370 cures by a reaction with moisture in the air and in the material. Wood materials in your home or shop typically have a moisture level of 6 to 14 percent due to fluctuations in humidity, and that is ample to activate polyurethane glues. You can also wipe a lightly damp cloth on surfaces before gluing. Either way, the curing time is minutes and not hours like Gorilla Glue or wood glue.

Works great, at least it does for me, it was packed tightly so I was impressed.

It’s polyurethane-based which I didn’t realize until after I used it. Gorilla glue offers both foaming and non- foaming versions. It’s very strong and environmentally resistant for outdoor applications but be aware this product is the foaming type.

I wanted to cover the bottom of this cracked old jug with glue to keep it from breaking. The glue was thick so I turned it upside down and let it drain into the jug while I was at work. When I got home this is what I found. Once I get the outside cleaned up the jug should last forever.

This glue is comparable to Gorilla glue but sets up much quicker. The description says 19.75 fl oz but that is wrong. On the manufacturers website the product is labeled by weight not volume but they also tell to the density on the product data sheet. I bought a (2) pack, each bottle 500g which equals 15.38 oz per bottle when you do the math. That comes out to about $.65/oz before tax but still much cheaper than Gorrila glue which is almost $1.00/oz by me. The glue itself works great.

ok There should have been some warning!! I was told to buy wood glue to make clay you mix it with corn starch and fabric softener and heat it on low mixing till it turns to clay. it turned to solid cement in my pan. I had to throw my pan away , my measuring cup, all the utensils I used, some of it got in my sink and all over my hands - it does not come off I tried with acetone and alcohol, soaps and lotions and even oils , this stuff is forever on me? Im terrified to find if it clogged my sink the little that got down there. There is no instructions on bottle or internet of how to remove this stuff. I imagine if your gluing something that lives underwater your golden with this horrible stuff, but for everyday use its terrifying and non removable so be super careful, I hope I dont have to replace my pipes, water only makes it stickier. Im totally at a loss that it is even called wood glue... I think its super glue, polyurethane, and gorilla glue mixed

Worked really good

Every once in awhile I need a joint jointed that titebond 3 isn’t the answer for. When that happens I reach for this stuff. Just remember to clamp it good and tape your joints on be prepared toScrape that foam. Good stuff. Every woodshop should have some. Sits right next to the 2 sided tape