Stick Welder, [Large LED Display] 200A ARC/Lift TIG Welding Machine with Synergic Control, IGBT Inverter 110V/220V Portable MMA Welder Machine with Hot Start, Arc force and Anti-Stick

I’m teaching myself to weld and wanted to start with arc welding. This is a solidly built machine at a good price that I have a feeling will last me a really long time. I’m just starting out but have already moved past the presets and am working on dialing in settings for multiple rods and material thicknesses. When connected to 240v power this machine will handle any task I could ever need. The hot start and dig features are really nice for something this cheap and work extremely well, although I’m only now beginning to appreciate their usefulness. I’m still just in the practice stage and have only used it on 1/8” square tubing and angle, and haven’t had to get it anywhere near its maximum power with 3/32 7018 and 1/8 7014 rods. I’ll be interested to try it with some 5/32 rods and on even thicker material eventually. I will say that the ground clamp and stinger are kinda cheap and I upgraded both. I may ultimately upgrade the wires as well but the welder itself is solid, powerful, lightweight, and extremely versatile with the included 110v adapter. I could see this combined with a small portable generator being a lucrative setup… once I get good.

Few things you should know before buying. 1: this is a great beginner welder to learn stick/tig. 2: it does an excellent job with tig at 100-150 amp. 3: it does a TERRIBLE job at anything higher than that. Allow me to elaborate, the ground cable is incredibly thin. Like thinner than your extension cables. Christmas light cord thin. This is why anything passed 150A is a death sentence for the cable. Another con is that the tig Torch lead is protected by a 1mm thick braided cable, so in other words you might as well have zero protective covering on it as the tiniest spark WILL blow the lead up making it useless. But you must take into consideration that these are just consumables. The box itself does great. Never had any power failures, tripped breakers, or smoke coming from the box. And lengthy use at 150A didn't make it hot. Not even warm. So box stays at proper temp. Its only the ground cable and the tig lead that need some work. Everything else is perfect. So all in all, for $160 this is an AWESOME welder that will weld a good variety of metals, but be economically prepared to buy a new lead and ground if you plan on doing heavier projects

We live in the country and purchased the ARCCAPTAIN Stick Welder to help with building sheds for our sheep and goats, and it’s been fantastic! The 200A ARC/Lift TIG Welding Machine is incredibly powerful and easy to use. The large LED display makes it simple to monitor settings, and the synergic control ensures smooth and precise welding every time. It has been a huge asset in constructing sturdy, reliable sheds for our animals. The welder is durable, lightweight, and portable, which makes it perfect for outdoor projects. It’s also versatile, handling both stick and TIG welding effortlessly. Highly recommend this welder for anyone looking to tackle welding tasks on a farm or for DIY projects!

I'm an experienced welder, so have top end welders to compare to. I enjoy buying the budget welders, evaluating them, then give some of them away. . I've done reviews on Yeswelder, and the sleeper of high quality, budget-friendly welders, Amico, which, at $189, is better priced than the Arccaptain. You'll see why I say this at the end of the review. Overall, Arccaptain stick welder is a nice machine, capable of using multiple types of rods. The display is great, and easy to read, even with my auto darkening helmet down. It has adjustable arc force, arc start, and has built in anti-stick feature, making it easier and safer to remove a stuck welding rod, by reducing amps to 10, instead of burning up the rod, as non anti-stick welders may do if you're not fast enough to remove the holder from the rod, or break it off the work. It has a nice rod selection feature, where you select the size rod you're using, and it keeps the amperage selection within the optimal boundaries of that diameter rod (you can bypass this feature as well). The power cord is about 6' long, with a 240-to120V adapter that seems well built but I can't see what the gauge is, or if it's aluminum or copper cable. The fan is high pitched and a little noisy, if that's a concern. No biggie but worth noting. The Yeswelder I evaluated has a much quieter fan. The ground clamp and electrode holder are actually pretty good for this price point! Welder efficiency is .7 which is better than the Bestarc (.6) but not even close to the Amico at .93 (1 is perfect efficiency). The main concern I have for highest efficiency rating, is welding at someone else's house who only have 120V available. On the same 20 amp outlet, the Bestarc may trip the breaker delivering 70 amps, were the Arccaptain may go to 85 amps, and the Amico to maybe 110 amps of delivered welding current. This can mean the difference of getting good weld penetration on 1/4" plate or pipe fence, or producing a weaker weld due to current limitation. Same issue on 220V as well. Something to think about. OK, for the testing. I used 5/32" Lincoln 7018. I put an amp-clamp on it and set it on 200 Amps. Surprisingly it read only 175 amps, with the current dropping on the second stick. I smelled a hot plastic odor coming from the cables. They were very hot! I noticed the wire gauge is only 16mm2, which is equivalent to #6 awg, and for copper cable, is rated for only 50 amps (For gauge, lower number means higher current capacity, wheres the European millimeter squared, higher number means higher amp capacity). This small wire is not good at all! So I pulled off the Dinse 35 connectors, electrode holder and ground clamp and replaced the cables with some spare #2 awg I had. Second surprise: I looked at the Arccaptain cables and was stunned to see they are copper plated aluminum! Even the copper wrap for the Dinse connectors are copper plated aluminum. In my opinion, if you buy this welder and plan to use it over 100 amps, I strongly suggest you swap out the cables. I bought my #2 cables from Temco on ebay but 20' (cut in half) length is $60, and you'll need lugs for the ground. So to do it right, you'll be into the upgrades for $70 with tax. (Are you seeing why I said the Amico is cheaper?) BTW, the Amico comes with 10' #1 gauge wires and heavy duty ground clamp and electrode holder. If you want to upgrade the electrode holder like I did, my favorite is the Lincoln 200 amp electrode holder, and is ~ $24 on amazon. I also like the Lincoln 300 amp ground clamp, and is about $26 on amazon. Once I replaced the cables I was able to get 190 amps out of the machine. One of the workhorses in the stick welding world is 6010 rod. It has deep weld penetration, can bridge gaps, and can weld dirty materials, including galvanized steel, and is great for out-of-position welding (vertical, overhead, etc) It has a mixture of flux materials, more importantly Calcium Carbonate, which burns back slower than the metal rod, creating a concavity at the end of the rod. This shields the steel during welding, and produces CO2 gas, shielding the weld from oxygen, and the CO2 provides more penetration compared to other gases. However this rod requires higher voltage to run, and many welders, including Yeswelder (from my personal testing). The Arccaptain actually does a pretty good job of running 6010 on both 220 and even 110V, although it runs better on 220V. If you look at the spec's for max welding voltage, it's 28v, which is needed for 6010. The high open circuit voltage is an indicator it is set up for higher welding voltage. The Amico also does a great job of welding with 6010 but my Everlast Thunder 255 is the best I've tested on 6010, and it even has a specific setting for running 6010...it's that tricky to run 6010 on inverter type welders. But the Everlast multiprocess welder is $1700 and weighs 78 lbs. So the Arccaptain running all rods including 6010 is great. It weighs about 8 lbs. I didn't test the lift tig but I wouldn't use this welder for tig. Overall, Arccaptain will work for most moderate jobs, and with upgraded cables can approach it's rated 200 amp output for sustained welding. With the upgraded cables, I have $185 into the machine for welding with 200 amp output, using the original ground clamp and electrode holder. For me, at $4 more, the Amico would be my choice, even with it's 17 lb weight and a little larger size. You take it out of the box and weld....no upgrades needed. But for most people the Arccaptain is a lightweight, good machine with a pretty good owner's manual.

This is a fantastic little welder. I was very skeptical but figured for a couple of hundred dollars I will give it try. The only drawback was the welding wire size, I believe it to be #8. When welding over 80 Amps the wire gets quite hot. I replaced it #2 copper welding wire and that solved the problem. Today I welded for approximately 4 hours using about 20-7018 1/8" rod at 140 Amps. It worked great. I had it plugged in to 220 VAC. I tried it at 120 VAC and the performance was the same. However after about 30 seconds the 15 Amp circuit breaker tripped. the weld was good though no difference with 220 VAC. So at 120VAC and welding at higher currents the breaker needs to be bigger. Great unit

Like it, works good,nice and compact not sure about longevity time and use will I am a retired fitter welder so I have used alot of different types of welding machines from stick,mig and Tig in my 40 +yrs .these inverter machines allow anyone to afford a smooth running Muti use machine for the home work shop.

Slightly difficult learning curve, but once you get it, it’s great. I’ve been successfully fixing all sorts of stuff around my farm. Love the portability.

nice product and fast delivery.

After Reading the reviews, I put on my heavier Dinse leads from my xmt 304 and plugged in to 240V. I ran 1/8 6010,6011 and 7018 as well as 5/32 7018 in Horizontal and vertical fillet welds on 3/8 steel plate. I found the welds were much better when I manually set the amperage and other settings. The 6010 ran horrible as I had problems keeping it lit at 75 amps, but the 6011 ran beautifully in both the horizontal and vertical at 75 amps and the 1/8 7018 ran perfectly in both positions at around 125 amps. (a little lower for vertical). I ran the 5/32 7018 at 175 amps and again it ran beautiful. The settings seem to be right on. Now my big question will be of course how long this welder continues to perform. I will be trying the TIG soon and will update my review.