ERYONE Silk Tri Color PLA Filament 3D Printer 1.75mm +/- 0.03mm, Multicolor Filament Tricolor PLA 1KG(2.2lbs) Cardboard Spool, Red Blue Green

TLDR: Two Thumbs Up, a solid "5 Stars." Nice Tri-Color Silk PLA. Be choosy what you print -- the tri-color really pops with multifaceted vases and shapes. 215-220 deg C print temp seems like the starting point for adjustment. Resealable bag and cardboard spool with remaining filament length/weight gauges are nice touches.First, let me state I am no expert. I've been 3d printing as a hobby for a few months under 2 years, and I've used three different printers. The only printer used with this filament was a FLSUN Super Racer delta, with MicroSwiss extruder, dual 5015 cooling fans, bi-metal hot end, and PEI build plate. It was connected to a FLSUN Speeder Pad running Klipper (input shaping was turned off).E-Steps, Extrusion and PID tuning completed prior to testing; followed TeachingTech's calibration guide and the official Klipper websiteAll models sliced with Prusa 2.6.0 alpha 5; models may have sliced differently in official release 2.5.1Filament packaging consisted of a cardboard box with viewing window and resealable plastic bag. The 1KG roll of tri-color silk filament was neatly wound on a ~140g cardboard spool. My spool had a mild dent, but not enough to impact using filament rollers.The spool was embossed with the Eryone Logo, and a sticker provided gauges indicating approximate remaining filament length and weight gauge as well as filament recommended printing values:Nozzle Temp - 190-220 deg CBed Temp - 55-70 deg CPrinting Speed - 30-100mm/sTemp Tower: 220 deg C provided a nice print; as the temp went down, the filament started to fall apart and I stopped the printTetrahex Ripple Vase by ChrisTheViolaNerd on Printables- Scaled down to 60% (160mm tall with a base of 120mm)- 0.9mm extrusion width at 0.15mm height in vase mode- 220 deg C- 65mm/s speed- Printing time = ~5hrsThis print came out great and I think if I lowered the height to 0.12mm or 0.1mm, and reduced the extrusion width it may have looked even better.Franken Mug by Sterna on Thingiverse- Scaled up to 500% (175mm tall with a front to back length of 155mm)- 0.45mm extrusion width at 0.20mm height- 220 deg C- 135mm/s speed- Printing time = ~18hrs- Approx filament = 123 metersThis was a long print and organic supports were used. Some of these supports broke during printing, so ignore any sagging filament as it's not the filaments faults. Although not part of this review, there are 4 more parts to print to complete this Franken Mug.You will notice banding for two different reasons, and sometimes at the same time. Neither are the filament's fault from what I see. 1) the filament may twist between the extruder and travel through the Bowden tube and present a different color when it gets to the nozzle, and 2) the hot end didn't maintain a constant temp which causes layers to look shinier or more dull. Printing slower may help with a "minimum layer time" cooling set.Articulated Spirit Dragon by AKinferno on Printables- 100% scale- 220 deg C printing temp- very nice first layer- failed to print twiceFirst time I suspect a filament clog caused "air printing"; second time the infill was noticeably under-extruded and didn't stick to the previous layer; again maybe due to a clog. Keep in mind both files were sliced on the PrusaSlicer 2.6.0 alpha 5.Overall, I like this filament, and it prints nicely. I will update this review with better photos after additional testing. You would need to calibrate your printer and test this filament before starting on any long prints. Also, I would choose a different color next time--something brighter--as I already have a lot of purple, blue and black filament.

This was my first purchase of Eryone PLA and I'm extremely pleased with the results. I print on an Ender V3 and the prints have been perfect. Love the color shift, makes my models stand out from the crowd.

Printed with my modified Bambu Lab P1P (enclosure, aux and chamber fans, AMS). Started off with the Generic PLA Silk Profile but bumped my first layer nozzle temp to 230C and then other layers to 220C and cranked cooling a bit. Pressure Advance (K Factor in Bambu-ease) set to a modest .020.The Bad:- Too high of a K-Factor lead to some Over-Extrusion- Ran the nozzle at 215C and had some weird extrusion that failed to adhere, literally looked like raw filament that just oozed out- Some defects that were partially too cold of a nozzle for the speed, and potentially could use some drying (Could also be a model issue since this was a Bambu Maker World Beta model, also the fact my Pressure Advance was too high along with Max Volumetric Flow being a bit high as well)The Good:- The bad issues are easily correctable and just common 3d Print stuffs- With an outer wall speed of 50mms and the 220C nozzle temp, it has a very nice shine to it- Spool is nicely wound. No issue feeding in the AMSThe Nice To Know:- The picture in the listing doesn't do complete justice. The colors on this, unless you shine a light directly on it, are very dark. Still shines super nicely, but its not a bright pink/purple color- Eryone has migrated to cardboard spools. I haven't had issues with my AMS, but it is worth mentioning- Specs on the spools are pretty spot on- For folks using Bambu Lab printers, the Generic PLA Silk filament profile is pretty spot onHonestly, I used a ton of Inland Silk PLA in the past, and am considering converting to this as it undercuts Inland on their Dual Color Silk by roughly $5 a spool, and I don't need to trapse down to Microcenter go get it. It's a solid filament, really nothing else to say about it

Beautiful filament with amazing results. I love this stuff. My only suggestion is to put it through a dryer prior to using it. It does tend to have adhesion problems without doing so. I do not mark it down in Stars though because that seems to be the way most of these silky plas are

I recently tried the ERYONE Silk Tri-Color Coextrusion PLA Filament, and it was quite impressive. The blend of red, blue, and green creates a unique and vibrant effect that adds a stunning visual appeal to prints. As a silk filament, it has a lovely sheen that enhances the overall look. While the print quality was good but not the best, the 250g spool size is perfect for experimenting with new colors. Overall, it's a great filament for those looking to add some unique and colorful prints to their collection. I highly recommend giving it a try!

Filament looks great and prints great. Will try this one again for sure.

Beautiful output especially at slower speeds. On a K1C, I got this at at 100mm/s speed. Trying another one at 75mm/s and it seems to be really bringing out the colors and shine. Nozzle temp is 215 for first layer, 205 for the rest. Started with bed temp at 55 degrees, but had trouble removing the brims afterwards. Trying a print at 45 degree bed temp, and if that also results in the brims getting stuck to the bed, will try not applying glue to the smooth PEI plate or may eliminate the brims altogether

Ordered this color several times, and it always amazes everyone that sees it. Definitely one of my more popular colors!Print quality is exceptional

Se ve muy bien las impresiones con el color

Great filament, prints look cool. I use it with a dehumidifier, probably that also helps of course

The media could not be loaded.  Que ce soit du PLA silk dual color tricolore mat ils sont tous fantastiques avec un super rendu je vous le recommande