PLASTI DIP PLASTIC/RUBBER PAINT SPRAY CANS AEROSOL 311g BLACK

Easy to use, make sure you clean your project with alcohol wipes and wipe with a clean cloth, I allowed 30mmn boarder around the badges and a light coat to start with, and left for 20min, and appled slightly heavier coat on 2nd coat, and same again on the 3rd coat and last coat slightly heavier, letting it dry for 20min between coats. Removed the masking tape pulling back the 30mm boarder this gives you something to pull on and it comes away from badges lovely, ive got a lovely finish to all my chrome is now black and any over spray whips off. Brilliant stuff well recommended.

This product is perfect for temporarily protecting damaged surfaces and for painting stuff you’re not confident with properly painting. I painted my car badges with this stuff. I chose this stuff because it easily peels off if I don’t like it or need to sell the car. I’ve kept it on for now and it looks excellent it’s given it a beautiful semi Matt black finish. I applied it like 5 months ago and it’s still fine. I’ve also used it to cover the curb scratches on my black alloys to keep the elements off the bare metal, until I can get them repaired. It was quick to apply and was seamless after it was applied. The stuff even stays on for months regardless of road debris, washing the car… and more impact damage 😂. Well worth it. If u don’t like it just peel it back off. It leaves no damage or residue. Just remember if you want a nice finish apply at least 3 coats. Waiting for each coat to dry for at least 15 mins. Also I can’t imagine that the lung cancer that the plastic fumes and dust probably gives you is good for you so wear a mask indoors.

Great for blacking out your car badges. Very easy to apply, no runs what so ever. Just make sure you follow the instructions & you’re good to go. Only takes 20 mins between coats & then 4hrs & it’s completely dry. I used the Matt black version. Good price too.

I used plastidip on my chromed plastic front grill of my camper, I wanted to see what it looked like with the ability to peel it off if not happy with the result. I followed the youtube video and removed all grease, white spirit first, then followed by alcohol wipes. Put can in to warm water, shook can for 2min, kept grille out of direct sunlight, temperature 28' c. The first 2 sprays were fine, 1st coat a light dusting, second cost good, then the can started to spit ( I sprayed upside down to clear the head after each spray) waited the recommended 30 min between coats. I used my fingersto smove out the paint blobs, then layed down another coat. Because of the rubberised consistency the blob holes were filled, by extra spay ( very frustrating). I am pleased to say the end result is amazing. Great product except for the gun spitting. Note, I also followed the recommended spray procedure with the can at 90 degrees to the object not spraying downwards.

Great coverage.Easy to use.

Great finish quality

Worked well on my Chrome grill. Not sure about durability, time will tell. Easy enough to use even for a novice painter like myself. Can look a bit lumpy when applied but seems to sort itself out when it dries. Some little bits wanted to lift when removing making tape so that part requires a bit of care compared to a standard paint spray. I guess on the upside if it goes badly wrong you can just peel it off.

Highly recommend, it’s easy to use and apply great finish, my favourite part is that unlike the normal paints this is a rubber base so let’s say u scrap the curb it just scuffs not comes off and you can rub the scuffs out, unlike the normal paint I used before when I scrapped the curb the paint came off.

Il prodotto non ha bisogno di presentazioni, è fantastico. I miei complimenti vanno al venditore che me l'ha recapitata cinque giorni prima del previsto. Top.

Compre un bote y pinte los símbolos y los espejos retrovisores de dos coches. Sobró un poco así que lo dejé por si hay que repasar. De momento bien.

Fácil utilização, qualidade top!

per essere la prima volta son rimasto allibito... pensavo fosse la solita cavolata invece mi devo ricredere... ho rivestito il casco da moto.. prima volta ho provato e andata cosi cosi,tolto tutto e rifatto qualche giorno dopo... perfetto!

Usato per ripristinare la gommatura delle maniglie interne di una golf IV. Dopo vari tentativi non riusciti ho provato a sgrassare la plastica, prima dell'applicazione, con una paglietta per la pulizia di piatti o pentole. Consiglio di togliere tutta la vecchia gomma se presente. Pulire perfettamente la superficie e asciugare bene. La prima spruzzata va fatta con una passata leggera. Consiglio di spruzzare poca vernice. Le ulteriori spruzzate possono essere più intense. Consiglio di far passare un paio d'ore tra una spruzzata e l'altra. Il risultato è molto bello.