Park Tool FR-6C Sprocket Puller Tool BMX 4 Notch

Does the job. Make sure you hold it in place with your bike nut for same place you're working on. Perfect=

Worked well for taking the freewheel off the back of my single speed bike. Seems like a sturdy little tool and the fact that it is a standard Park Tool size means I did not have to buy an extra spanner as the one on the Park Tool chain whip does the job.

This is a hardened steel tool with well engineered pegs. The only problem is it’s not quite deep enough ir wide enough at the center to go over the inner axle bolt (see picture), I used a tapered step drill to widen the centre in the right place. Unless you do this, or remove the inner axle the tool won’t sit flush and you bay damage the slots on the freewheel. I suggest using the outer wheel but to hold the tool in place so you can use a socket with a breaker bar to remove the freewheel easily

Done the job was a pain in the ... to do with only a spanner and a weak woman to hold the wheel but tool held up ok

Fits well and does the job it’s made for

Needed to remove DNP single speed freewheel as it was sounding rough. I had tried the hammer and drift method to remove it with no luck. The freewheel had 8 notches but on measuring them I hoped that the 4 prongs on the FR-6 might work.The tool fitted snug in 4 of the notches. It needed a large wrench with the wheel on the ground so I could put some weight on it but it came off relatively easily. Shows what can be done with the right ( or near enough) tool.

Fits OK just slips needed a better size nut so could keep the puller tight to be able to remove freewheel

Top quality as you would expect from Park. Used on my single speed shimsno 16T freewheel and fits nicely. I used the FRW1 puller (I have the old version so the FR6 doesn't fit completely inside the puller) and I just needed to lightly tap the end of the puller with a hammer.

Wie von Park Tool gewohnt, ist auch dieser BMX-Freilaufabzieher hervorragend verarbeitet. Das Werkzeug macht einen sehr hochwertigen Eindruck, ist sauber gefertigt und sitzt passgenau auf dem Freilauf – ganz ohne unnötiges Spiel. Dadurch lässt sich der Freilauf sicher lösen oder montieren, ohne abzurutschen oder das Bauteil zu beschädigen. Wer Wert auf präzises und langlebiges Werkzeug legt, ist mit diesem Freilaufabzieher bestens bedient. Typische Park Tool Qualität – absolut empfehlenswert.

This tool works perfectly and the price is very reasonable.

Embout solide et bien ajusté.

perfetto !

Park Tool es calidad, pero hay cosas en las que no se aprecia tanta diferencia. Funcioinar funciona bien, ojo que hay otra herramienta similar para otro tipo de piñones, fíjate que valga para tu piñón