Vinyl Wall Base Baseboard Molding Trim 4" Flexible Self Adhesive Rubber Wall Base Moulding Trim Peel and Stick Design, 4 Inch x 20 Feet, Black

I bought a 60' and 40' to do my garage. Quality is good and the adhesive is strong. In fact, it will pull off the drywall and paint if you need to redo a section (which I had to do). So order a little bit extra for mistakes. My tips on installing, that seemed to work for me: 1. Unroll it - they suggest using 20' sections. I did not, and had no problem. I wanted as few seams as possible 2. At the corners, where you cut a slight "V" at the bottom - go more narrow on the "V" than you think. Initially I made the "V" too large (which I thought was a conservative size), and I ended up with a slight gap. A narrow "V" is the key. 3. I found it to be easiest to install it in this manner: a. - Unroll the entire roll b. - Take one end and pull off about 2 feet of backing at a time as you go c. - Hold the edge out at about a 45 degree angle (I worked from right to left, so in this case on the left side closest to where the backing has not been removed yet), I hold it out at an angle and then with my right hand use my fingers from the right edge working my way to the left edge to tuck/push the bottom portion into the wall FIRST. That gets the bottom edge nicely along the wall without having a bunch of wavy amateur looking baseboard. Once I have that bottom section along the wall, then I press with my right hand from the bottom to top to stick it to the rest of the wall. d. - Peel another 2 feet (or 1 foot or whatever you are comfortable with) and continue with holding the left side out at an angle as you apply the bottom starting with the right edge. One note - it will not be perfectly straight at the bottom - there may still be a slight wavy curve to it in spots - it all depends on your garage floor and how much gap there is between the drywall and the garage floor. Good luck. I liked the product.

I’ve had installed for about almost a year. I have zero experience and was able to install these. You will benefit from having a floor roller. I used a hair dryer to warm them up a bit to get best adhesion. But they’ve stayed put! Easy to cut with a nice appearance. Garage isn’t super clean so photo isn’t spic n span but very happy with this product.

Easy to use adhesive worked great

4 stars bc I wish the adhesive went down to the little lip at bottom bc it doesn't want to lay flat everywhere. I ll have to inject some glue of some kind in several places at the bottom. But the wide part dors stick well. It looks nice otherwise.

Fast delivery. Color as described. Great quality. I've never installed baseboard before or seen it done. Super sticky adhesive. Prepping the area: removing nails/ staples took the longest. Easy to use: I easily cut using a metal ruler, scissors and utility knife. For ease of fitting I used a hair dryer before application a few feet at a time. I was able to fit inner corners and outer corners. Pricing is better than my local hardware stores! It took me awhile since I'm a newbie but the results are amazing and well worth it!

Easy to install but needed glue to stay on the wall. It looks really good. Would buy again

I tried to stick it to the base of the wall but it keeps popping away from the wall. I may try to use some screws. Looks okay tho

I found the molding trim to be easy to work with. Very durable

Great quality! Easy to use and take off even if you need to adjust highly 10/10!!

Excelente producto, adhesivo muy bueno, estética también.

Easy to cut, easy to apply. Great product

Very good, sticks to the surface very well. The only drawback is that it is very difficult to bend in the corners, it does not turn out smooth, but it is still good. Looks very nice.

These baseboards are good quality, the built in peel and stick glue was more than strong enough. In areas where the wall is a little buckled or not quite smooth, the baseboards just needed a little heat from a heat gun to smooth them out and get them to really stick well. This baseboard offers quite a bit of stretch, which made it harder to get really tight in the corners. It would fit tight when applied, but pull back a little leaving a slightly rounded corner.