Ringke Fusion-X for Samsung Galaxy S23 Ultra Case [Precise Cutouts for Camera Lenses] Enhanced Bumper Heavy Duty Shockproof Protective Cover - Black

So far, I am very impressed with this case. The material is about twice as thick at the corners, where a phone is most likely to get damaged. The transparent film on the center of the back is very thin. This provides less protection, but better heat dissipation and inductive coupling for wireless charging. The extra texture and design details provide a more premium look at a bargain price. The camo pattern makes me wish I had a green phone. As for fit, this case comes within micrometers of the edge of the touch screen, and the thickened area around the rear camera lenses interferes with neither them or the flash. It fits similarly well around the speakers. Microphone and charging port. You might have trouble with especially thick charging cables, which is true of most cases. The rubberized buttons feel crisp to use. They have different textures, making it easy to find the correct button without looking. One issue is that the case is slightly less grippy than my last one due to the harder rubber and plastic used. This makes it easier to slide into a pocket, but also easier to slide off a surface or your hand. The last piece is durability. I guess the jury is out until I've used this case for a while. For perspective, I destroyed the Otterbox case that was on this phone previously. That case was both thicker and heavier, so I hope this Ringke is up to the task.

I was looking for a case that would let me see the beautiful back side of my lilac A55 while also protecting it appropriately and this one greatly exceeded my expectations. In fact, i liked it so much i went ahead and got one for my mom's A55. Here's a list of everything i love about it: - It's extremely well built and feels high quality to the touch. - The corners are pretty beefy so if you drop it it will likely not crack. - The raised camera lip and corners let me put the phone on a screen-up position without it rocking back and forth while also protecting the cameras. - The above point also applies to the raised screen border. - The sides are textured and have a lot of grip. - The textured buttons help me identify which one's which and are also very easy to press. - It has a little cutout as to not cover the top speaker up. - The space for the charging port is pretty generous so you can use any cable you want. - it just looks gorgeous. Extremely satisfied, would absolutely buy again.

I have always bought Ringke cases for my phones. Good grip around the edges. Good protection with case material. Cut outs slightly off on one spot but otherwise area needed to be exposed are. Highly recommend for protection.

For many years the only brand case I would use was UAG; however, the S23 is the first phone I've had since the Note 4 that doesn't have curved screen edges, and the UAG cases don't work well with flat screens. I therefore tested out a bunch of cases as a replacement and ultimately decided on the Ringke Fusion-X. I use edge launchers extensively, and the previously curved screens required UAG to design the edges of their cases to be low profile. I was therefore able to activate the edges with ease; however, with the flat screen, UAG has built the edges up considerably, which hinders edge activation. The Ringke case, on the other hand, has a bit of a cutaway on the left and right edges which allows easy activation of edge launchers, and gives the phone a thinner feel in the hand. On the top and bottom of the screen, the lip on the Ringke is roughly the same as the UAG; however, the Ringke case has a lower angled bevel to the screen, which again makes it easier to activate the edge. Ultimately, the lower profile sides of the Ringke case are what sold me, but the case has a lot more going for it: 1) The case fits perfectly. All of the cutouts line up, and there are individual cutouts for the camera lenses versus many other cases that have one large opening. There are also no gaps or bulges around the screen edges; 2) The buttons are textured and have a nice clicky response. Of all the cases I tested the Fusion-X had the best buttons; however, Ringke left the case raised between the power and vol down buttons which confuses my finger at times when I'm trying to locate one of those buttons. I will likely use a Dremel tool to remove that piece of the case; 3) The phone sits flat. I have returned a number of cases because they don't sit flat on a tabletop, and tapping the screen causes the phone to wobble. 4) Value. To be clear, even though the Fusion-X has a bit of an industrial look, I don't consider it to be in the category of ultra-rugged cases (and I don't expect it will have the same protection as my UAG case). Ringke does claim that the case meets MIL-STD-810G drop test requirements, which per the standard requires a drop height of 48 inches (chest height) over multiple drops. Having said that, you are typically taking the manufacturer's word that tests were conducted in accordance with MIL STD requirements (with some manufacturers saying they tested far in excess of 48 inches)... Saying that a product "meets MIL STD requirements" after in-house testing is not the same as having a product that is certified by an independent third-party testing organization (think of U.L. Listing, as an example). Overall, I think Ringke has struck a good balance in functionality, form, and protection for normal daily use... And yes, the plastic back on the clear version does get fingerprints, but no more than the front of the phone. Even if that's a concern to you, it might be worth overlooking that drawback, all things considered.

Sometimes you get what you pay for, but in this case I got much more than what I paid for. I spent big money on the Galaxy S20 Ultra and as much as I hate cases, I definitely needed at least something to give it protection when I take it out. This case is stylish with a clear back with camo print on it and much needed durable rubber frame which helps with handling the phone and getting a good grip. All four corners seem to have a designed rubber impact bumper and all four of them seem more reinforced than the rest of the case which would work great as shock absorbers. Another worry of mine is that the S10 Ultra has quite a significant camera bump and that can create some problems when laying it down. This case has a special border around the camera bump, raised just above the bump so that if you pay the phone on its back, the camera glass wouldn't be touching the surface. I don't see myself ever using this feature but there are holes on the bottom of both sides for lanyards,which could come in handy. The volume and power buttons are all separate with indication of "+" and "-" and the power button has a rough texture to differentiate it from the volume. I don't notice any effect on the quality of the speakers and there are all proper cutouts for the sensors and charging port. All in all, this is a 5/5 case, durable enough to withstand light drops, protection of the back glass and frame, smudge free back panel and has a very "stealth" like style to it. For $6.99 this is an absolute STEAL. Very happy with the purchase.

Nice looking and good quality case for my Samsung Galaxy S25 +. The fit is precise and the protection is very good.

Great quality fits perfect

I have purchased the Fusion-X model for s10, s21 ultra, s24 ultra, now s26 ultra. Fantastic product for each model over the years and I look forward to it protecting this phone for years to come. Dropped the phones here and there and this case always looks great while protecting. Please never stop making the Fusion-X series!

I've never really tried Ringke cases until now (always bought UAG). My wife got one for her S21 ultra which she loved, so I thought I'd give it a try. I purchased the Camo Black case which came in a really small package! I threw my phone in this case and found that it's very light and offers great protection! It also looks really awesome!! I love the camo design on the back with the Phantom Black S21U. The case is grippy (which I love), slim, fits nicely with a screen protector, and it offers great protection not only for the screen but the camera as well. I also like how the phone lays flat when I set it down on a flat surface. The case looks great, offers protection and the price is unbeatable!! Overall, I love this case and will most likely get Ringke cases going forward! Get one, you will not be disappointed!

No me encanta la parte de los botones porque no me permite distinguir bien cual es cual, pero es resistente y de buena calidad

Perfect fit on a new S21 5G! Covers all the sides nice and snug. Cutouts are all perfect Looks great and feels nice. I like how the case separates the S21's mono volume rocker button. Power button has a texture to it as well. There's also an earpiece cutout. Great price too!

Muy buena relación calidad precio

منتج اصلي ورائع