Mowei [3+2 Pack for Galaxy S23 Ultra Screen Protector [Fully Support Fingerprint & S Pen] 3X 3D Curved Tempered Glass and 2X Camera Lens Protector for Samsung S23 Ultra 5G

Took a little time to get the front screen protector on given the steps to follow in the instruction video, but I was successful in doing so on my first attempt and overall happy with the product. The fingerprint sensor works perfectly after my prints were resubmitted and the s Pen works with the protector flawlessly. If you have the patience, and follow the instruction video, this is a great product! I will say, it does leave a bit of excess glue on the sides of the phone after installing but it was easy enough to clean off. The camera lens protector is an added bonus that comes with this product and is easy enough to install. It simply sticks to the camera lense, without any additional glue or curing.

I've used Whitestone in the past but this Mowei offered a better value at a slightly lower price point. The kit comes with everything needed including the positioning frame, adhesive absorption pads, stickers to protect the input ports, cleaning pads, UV adhesive, a weight for the fingerprint area, a plastic ramp to lower the screen protector onto the adhesive, and the protectors themselves. Instructions are straightforward but come with a caution that most issues arise from not watching the prepared video first. I strongly recommend that you do watch the video, it is helpful even if you have used UV protectors in the past. Of particular note, the curing time is significantly longer than in my past experience; perhaps due to a different adhesive being used. I followed the instructions exactly and had no issues at all getting this screen protector properly aligned and cured. Fingerprint registration was also straightforward. The real test for me was about how well it would work with a case. I was a bit apprehensive about the fit but to my pleasant surprise, it fit exactly perfectly with my Spigen NEO Hybrid. The screen protector is slightly curved but leaves just enough (and I mean precisely just enough) space such that it does not interfere with the case and the case does not "push up" against the protector as my old one did (creating a slight uplift of that screen protector). I really thought that the rear camera protector would be the place where the case would interfere but again, it very precisely and perfectly fit with my case. Overall very pleased with the fit and function. Looks like this will be my long-term goto for screen protection.

The liquid glue was a mess when installing the screen. Took at least 30mins to clean off all the liquid-rubber stickiness after installing the screen protection. After installing the screen, and using it for a month or two, it is highly probable you will find more sticking rubber from the liquid glue coming out of the edges of the screen protection. You will also find hard rubber in the edges and corners you can attempt to remove with acetone. The UV light for quicker drying is cool, but it doesn't help with preventing the glue from spilling over the sides and keeping the glue out of the edges of your phone. Permanent scratch marks will appear on your phone while attempting to clean the mess this kit makes.

The screen protector was really good quality, and a LOT of work was done to make it install as easy as possible. The process takes a few minutes but is well worth it and easy due to the guide and bumpers on the sides of the guide. This is one time that the mavericks among us MUST READ / VIEW and follow the installation instructions, lest you get the glue into the speaker port (you need to install a protective removable sticker) or air bubbles (you need to use the way cool wedge device to slowly "drop" the screen protector on top of the phone and two dabs of liquid adhesive. As in life you get what you pay for, so the little extra effort is well worth the protection (think aggravation alone on replacing a screen). I am contacting the MFG because the rear camera (more expensive than the screen!) protector did not fit. It is probably impossible to keep up with changing phone designs on various models versus shipped inventory. I have two extra screen protectors (it ships with three), so I would like to keep this package. Also the fingerprint detection would not work, but this may be because I also added a "liquid glass" coating before installing this screen protector (belt AND suspenders I always say). May also be user error as I have never used the fingerprint detection (and frankly don't want it because the phone shuts off and so does google maps which can get me killed while driving). Regardless it is MUCH better than the protectors with a hole over the fingerprint detector area (my old screen protector drove me CRAZY when looking at a hole in the reading area, esp with polarized sunglasses on). Overall best on the market, and I have looked high and low.

Haven't done this kind of screen protector before, but after using Zagg and other film types for my last several Note series phones, I wanted something that wouldn't get dented and marred from using the s-pen as often as I do (digital artist by trade). I figured this would be much messier, but CAREFULLY FOLLOWING THE INSTRUCTIONS led to a nearly perfect install. I had one tiny bubble right under the middle that I missed until after curing. I was pleasantly surprised by how cleanly it removed, and I used a second one and it came out flawless. Edges had 0 excess to clean up, fingerprint reader worked perfectly, and does the s-pen (though I do will miss the little bit of drag film gives). After the first 45 second cure, I did put more weight on the fingerprint reader weight (a small stack of quarters) for the next 120 seconds, and didn't have to make any adjustments to the fingerprint sensor afterwards. I bought a Zagg Santa Cruz case for it (crystal palace was sold out) and was worried if they'd interfere, but the fit is *perfect* between them, maybe a little under 1mm all the way around and the lens cover for the back is a flawless fit with this case. Very happy.

I used this product for my s21 ultra and it worked great. Now I got it for the s23 ultra and it's still the best option. I tried a different screen protector first with my s23 this time, because it was cheaper and didn't have glue, and it was a waste of time and effort. One broke while putting it on so I returned it for a replacement. The second has bubbles that would not come out. Got a refund. Went back to this and it worked flawlessly just like in the past. It is more expensive and the process of using glue is more work, but the end result is perfect. No bubbles, and the fingerprint sensor works just like there is nothing there. Also when I've broken these in the past, they protect the screen and remove easily.

This package is great and includes *almost* everything you'd need to get this screen protector safely and hassle free on your phone. For the most part, the videos shown on this page are helpful, but they do leave out a crucial component to set-up; you need to cover the speaker and remove your s-pen. While you can just use another sticker, it needs to be a very fine application as you don't want to interfere with applying the actual screen protector. The glue cures just fine with the UV light provided though it took me two times to get it "right". The first time there was a rainbow pattern around the selfie camera so I tried my best, waited 10 minutes, but still the rainbow pattern remained so I removed (did not cure yet), cleaned up the mess, and tried again. The second time I saw no visible flaws so began to follow the rest of the instructions with the weight but unfortunately the added pressure moved the protector back and caused a bit of a glue mess. I used the guide to hold the screen protector in place and a tissue to absorb any excess I could. I attempted to cure just the top of the screen protector quickly and remove the guide but somehow light bleed caused some very minor curing of the guide to the phone which was very unfortunate. I did my best and resolved the situation later with a bunch of alcohol pads, but first, I needed to continue to cure the rest of the glue. Here is where things just went south even more for me. I had accidentally cured my phone to the frame of the screen protector applicator. It took some force but I was able to pry it out and use another giant glob of alcohol pads to clean up the excess glue from the sides of my brand new phone. After inspecting everything thoroughly, I cured the sides, cleaned it all up *again* and was finally satisfied with the results. What should have taken 15-20 minutes took me about an hour unfortunately. TLDR; Cover your speaker, ready the absorbing materials for the bottom, and remove your s-pen. Best of luck!

I can't say it's a failure because it is protecting the screen, but the edges are unsticking. Any type of case will probably hit the edges of the protector and cause it to unstick. Not sure how much longer I will leave it on my phone. It looks terrible being unstuck half way around the phone.

Brukar aldrig skriva reviews, men det här var så bra att jag var tvungen! Hade just fått tillbaka min Samsung efter att skärmen gått sönder och kände mig tvungen att försöka hitta ett skärmskydd som faktiskt sitter bra. Och oj vad det här var bra! Se till att se instruktionsvideon bara - för det är lite pillrigt att få dit det. Supernöjd!

Parfait, pas trop difficile à installer. J'ai réussi directement en suivant la vidéo. C'est facile, il faut juste faire attention à bien mettre la colle au centre de l'écran. Quand on pose la vitre, il faut attendre que la colle se diffuse partout. On peut même pencher un peu le téléphone une fois placé. C'est nickel et le lecteur d'empreintes fonctionne bien, mais j'ai dû reparamétrer mes empreintes.

Ürünün nasıl takıldığına dair video var, bundan hariç olarak bir çok kişinin baloncuklardan kurtulamadığını okudum ve buna çözüm buldum. Camı ekran üzerine yerleştirdikten sonra baloncuk olan yerleri aşağıdan yukarıya doğru kaydırın. Tüm baloncuklar ekranın üst kısmından çıkacak. Sağa, sola veya aşağı doğru kaydırırsanız başka yerden yine baloncuk çıkar ve tekrar uğraşmak zorunda kalırsınız. Ürün gerçekten dayanıklı, sadece 1 tanesini aylarca kullandım ve defalarca düşürmeme rağmen ekranda çizik dahi olmadı. En son bugün düşürdüğümde köşesi çarpmasına rağmen kırılmaz cam kendini feda etti. Parmak izi performansı biraz düşüyor ama bu koruma için göze almaya değer. Ön kamera için fazla bir farklılık göremedim. Bu zamana kadar aldığım kılıfların hiç birisinde takılma, camı kaldırma gibi bir sorun yaşamadım. Cam gayet kalın, bugün bir tanesini kırmak için uğraştım, tamamen U şeklini aldıktan sonra temperli cam gibi patladı fakat etrafa dağılmadı. Bu üründen 2 kere aldım ve sanırım yine alacağım. Bundan daha iyisini henüz bulamadım ve yapıştırmayı öğrendikten sonra tek kelime ile mükemmel

After dropping my phone twice, I had two cracks in the screen on my Samsung Galaxy S23 Ultra. I had damaged the top third of my screen with two cracks on both the left and right. On the left was a small but deep chip, and on the right was a large crack stretching from the top near the camera down by about a third of the screen and across to the right edge. I was considering sending my phone for repair but decided to give this screen protector kit a try first. The installation video explains exactly what to do and it helps to have this nearby on a laptop to rewind and pause as you apply the kit. Everything is included for cleaning, applying the glue and finishing with the UV light. The two cracks on my screen are completely gone and the screen protector is almost completely invisible, apart from a small lip at the very bottom of the phone. There are no bubbles, it applied perfectly straight thanks to the guide tray, and it's super clear. Once I re-calibrated the fingerprint reader, this works flawlessly and there is no impact in the touch screen sensitivity. I did not have to enable the sensitivity feature in the phone settings. I don't normally leave reviews but this kit was particularly impressive. To think I nearly spent £200 odd on replacing the screen when this kit cost me less than £20 and done the job perfectly is unbelievable. The camera protector is an added bonus and actually looks quite smart. You would think it was part of the phone's overall design. Would I recommend? Without hesitation.

I order a brand new S23 Ultra last week and the Mowei Tempered glass to go with it. Upon reception, I installed one of the three protective glass provided with the kit. 2 days later, I drop my phone, screen first on ceramic tiles. The Mowei protective glass did it job wonderfully. The procreative glass were destroyed, but my phone screen were INTACT! I just finished installing another one today. Installation is a bit tricky, follow the instructions and take you time. My trick to get it right is that I do this in the bathroom after someone took a shower. The humidity help reducing the dust particles. The kit comes with everything to install successfully and more. The screen quality is very good, I hardly notice I have one. I highly recommend this product, if you want to avoid costly repair.