InnoGear Mic Boom Arm Microphone Stand Cable Management for Blue Yeti FIFINE AM8 K669B HyperX QuadCast S SoloCast AT2020 Shure SM7B MV7 and Other Microphone

I've been using the InnoGear Mic Boom Arm for over a year now with a Shure SM7B mounted on it, and it's proven to be rock solid. This arm delivers exactly what you need from a professional mic stand. The build quality is exceptional. The joints are tight, the spring tension is consistent, and there's zero wobbling even with the weight of the SM7B hanging off it. The SM7B is no lightweight, but this arm handles it effortlessly without drooping or drifting. That's the kind of stability you need for recording and streaming. After a year of daily use, everything still feels as solid as day one. No springs weakening, no joints loosening, no creep over time. The cable management clips work as intended, keeping my XLR cable organized and out of the way. The mounting clamp is rock solid and doesn't slip on my desk. Installation was straightforward, and compatibility with the Shure SM7B was perfect. The adjustability is smooth—you can position the mic exactly where you need it without fighting the arm. Once positioned, it stays put. No readjustment needed mid-session. For anyone running a streaming setup, podcast, or recording studio with a quality microphone like the SM7B, this is a no-brainer purchase. It's affordable, built tough, and will last you years. Highly recommended.

I recently purchased the InnoGear Mic Boom Arm Microphone Stand, and it has completely exceeded my expectations. The arm is sturdy yet smooth to adjust, allowing me to position my microphone exactly where I need it without any wobble or sagging. Installation was quick and easy, and all the parts felt high quality right out of the box. I love how the spring mechanism is quiet and stable, which is perfect for recording or streaming without unwanted noise. Overall, it’s a reliable, well-made stand that has made my home setup much more professional. Highly recommended!

This arm is exactly what I was looking for. It has an extender to make it higher so I was able to have it go above my monitors and come back down when I need it. Super easy installation and has the best cord hider I have seen yet from a mic arm. It fit perfectly into my complex setup. Very compatible if you have monitors and want a mic to come over. The movements on it are also very fluid and strong. And it holds my microphone perfectly when I mounted it so it’s mount ability and ease of use makes it a no brainer purchase

This is a surprisingly nice mic arm for the price. Much more heavy-duty than the boom arms I've purchased in the past. The cable management channels make everything nice and neat. The base clamp and riser are made like a tank. Very smooth to adjust without all the cheap "springy" sounds I was accustomed to. Solid buy!

Great stand, i use it for my Rode Podmic and it works great! The weight feels nice and the movement is smooth. It even comes with a nice extra part so you can raise it above your monitors if you wanted to. I have had problems with it falling twice, with my microphone on it, I do not know if it was cause of the amount of times I turned it to tighten it, maybe it wasn't tight enough. The third time, I turned it a lot more to tighten it around my desk, and it hasn't fallen again. So that might have been the problem, I will update if that issue continues. The stand is very sturdy besides falling a couple of times like I stated and easy to move out of the way as necessary. Solid 9/10 for the stand, could be a 10 but it did drop with my Rode Podmic but that could be used error. Just be aware so you are not scared like I was. It also comes with free Velcros for your microphone cord so that's a great addition!

Granted I’ve only had this boom arm for a weeks, I can say without a doubt that the stand is 100 % worth the money. The quality feels really solid, durable, and sturdy. The size, fit and range of motion are all great. Would definitely purchase again and recommend to a friend

Attractively designed, well-built, will support a 3-lb mike extended. Three weaknesses: 1) An intolerable rattle from a loose round cable guide at the center elbow joint. Fixed it by pulling the guide off the joint's axle, placing velcro on both sides of the guide to eliminate play, and re-installing the guide. 2) The mike mounting post is held by a plastic clamp. I've seen stronger all-metal clamps on $19 boom arms, and some reviewers experienced the clamp's failure. 3) The metal desk clamp has a round plastic disk on top of the threaded post; we'll see if it holds up as well as metal.

One of the best quality of life upgrades for my desk setup after having my AT-2020 standing on a simple stand for many years. The arm is sturdy and stays in place where you move it but it articulates easily. The clamp holds super solid on a standing desk. I like the look of it and the cable routing channel. Some of the best money I've spent on audio equipment and it wasn't much.

Fantastic Stiffness. Works a Treat! LOOOOONG which is VERY GOOD!!! Saved me Forking out another £40+ Can’t even be Mad at the Price Considering the Competition!

For me, this is a great product. Well constructed; feels heavy-duty. Extremely sturdy. The joints of the arm are very tight and hold (my) mic in place very well. Track tray for cabling; very easy to clip in and out. And no brand name on the arm that advertises for someone else! I've only had it for a few days, so I will update should the first impressions change. Very happy with this purchase.

TLDR: necesitas un adaptador 5/8 a 1/4 si quieres utilizarlo con un AT2035 y su montura antichoques. El producto como tal tiene 5 estrellas. Es un brazo de acero que se nota va a durar mucho más que el que tenía. Anteriormente adquirí el paquete de Audio Technica 2035 con su brazo y me duró unos 4 años. Hace un par de días desafortunadamente se rompió y decidí comprar éste y vaya sorpresa. Es mucho más fuerte que el de AT y la calidad del material y las piezas es superior en todos los aspectos. El brazo no se mueve tan fácilmente pero precisamente eso estaba buscando. Es rígido y manipulable. Sin embargo, hubo un problema serio: la tuerca para enroscar el micrófono no es compatible pues es 5/8 y mi micrófono es 1/4. Me dejé llevar por el anuncio pues decía que era compatible con el AT2035 (y además en la imágen dice que la rosca 5/8 es un "adaptador" y supuse que se podía quitar para dejarla 1/4) pero no lo es. Desafortunadamente me vi obligado a comprar un adaptador 5/8 a 1/4 adicional y tomará otro par de días hasta que pueda utilizar mi micrófono. Revisa bien que tu micrófono sea 5/8 y no 1/4 como es el estándard para que puedas utilizarlo. Esa es la única razón por la que no le doy 5 estrellas. Si no tienes este problema, es el mejor brazo que puedes comprar a este precio.

Very sleek design. Holds my mic exactly where I need it and having the channel to run the cord through and a cover for that channel gives it a super clean look. Excellent range of motion!

Such an upgrade! Having the extra height let's it sit over my monitor when it is on a monitor riser, and without the riser with my monitor raised via a stand. The additional height gives a lot of flexibility for setup. It moves smoothly and doesn't show signs of sagging in the month I've been using it, even with frequent repositioning. I use it with the HyperX SoloCast 2. Super quiet, feels high quality, and durable. Very quality upgrade from my $15 boom arm from years ago.