STINGER Jeep Wrangler AHD/CVBS Dual Blind Spot Camera Kit (Set of Two) (Standard Jeep Wrangler JL/Gladiator JT)

great cameras for offroading. install is a bit harder to do a good routing but it is with any car. it has a wide view and can connect to any 4 pin radio. works with jeeps without doors.

I installed these blind spot cameras on my 2020 Jeep Gladiator and connected them to my Stinger aftermarket stereo — they work great. The image quality is clear, and the visibility they provide on both sides really helps with lane changes and parking. Installation was straightforward, and integration with the Stinger unit was smooth. A solid upgrade for added safety and convenience on the road. Highly recommend for Gladiator owners or anyone adding cameras to a custom stereo system.

They fit nice on the car. I would’ve hoped for better quality, but they work.

I got these to go with my Stinger Heigh10. The installation instructions don’t show how to wire it to the head unit. It turns out that you extend the cords with the included extension cords by pulling them apart where they look like they would match on each camera wire. Red with red, and white with white. Then at the head unit, you pull it out and plug the yellow plugs into any available yellow camera inputs. I used 3 and 4. Ignore the trigger wire inputs. On the head unit wiring, there is a 12v power output where one is red, and one is black, that look like where your wires go. Pull back the clear plastic protecting them, and put red to red, crimp it together, then pull the protecting plastic back. That will power the cameras - both reds for both the cameras in there. Now do the same with the black wires - put them both in the black one and crimp them to ground them. The last step will be, after replacing your radio, to add the cameras to the software and they have a video on that. I was glad I did this while installing the heigh10, I wouldn’t have wanted to pull it out again. They do a great job, and come on when you’re moving over 5mph and you turn on your blinker. You can also access them through the menu. It takes about one second to come up after the blinker is on, but I don’t mind.

I love these cameras. They took about an hour to install. I have the 10.1 inch Kenwood DMX1057R which has 4 camera inputs. They activate on the turn signal via the Head unit. They are awesome cameras. I have always had issues running door less and seeing out of the aftermarket mirrors. I feel safer going doorless now.