MOESSmart Double Light Switches, 2.4GHz Wi-Fi 2 Gang Single Pole Switch, Netural Wire Required, Inteligente Switch Combo Work with Alexa Google Assistant, Remote Controlgle Assistant, Remote Control

Hadn't heard of Moes, but the 3-gang switch was cheap enough to just try it. It's very easy to hook up if you know anything about swapping switches. I was able to wire it up fairly easily, since there is only one line, I pigtailed it with the 3 switch power wires. Then the 3 load wires insert in the back. The screws are small, but seem to be sturdy enough to hold the wires. Manual operation was working fine. I then downloaded the Moes app, could have used Tuya if I had it. The apps are the same, just different "skin". The QR code indicated a 4-gang and not 3-gang, and it takes several minutes for it to recognize your 2.4Ghz WiFi. That made me second guess the setup and I went back in the app to manually select switch, but then too many choices for 3-gang switch. It would have been nice if the box or docs could have indicated which switch to manually choose in the app. Anyway, long story just to say - be patient - the "choose WiFi" screen stays up for a long time - 4 minutes or so before it asks for the password. Once I did that, the rest was cake by the ocean. Renamed the switches to what I wanted them to be. Oh, and icing on the cake was that the entire switch group(all 3 switches) are listed as the 4th switch on the app. So, the 3-gang switch (named mine LED lights) is easy way to turn all 3 on or off. You say why? Because I'm using my 3 switches to control my upper cabinet lights, the under-counter lights, and the toe kick lights on my base cabinets in the kitchen. So with Alexa, I can say "turn on the LED lights" and all three turn on. Really great switch. I am thinking of buying a spare just in case this one goes bad. Seems like all of the really cool stuff disappears after a few months.

My husband installed it and it works flawlessly and looks wonderful! Instructions provided were great and installation is really easy. These switches only work on 2.4GHz which I should've checked before I ordered, but it isn’t a problem for me since our network has both. The device works with the Tuya Smart app. which I was already familiar with because of some other appliances in the house. These light switches work really fast and accurate and work with our Google setup. So far, I am pretty pleased with the quality and how affordable these are.

Everything was good: installed, easy app & configuration, integration with google home. But then within 3-6 months all of them stopped working. I install about 10 of them and pretty much all stop responding to the button. Control from the app works but the switch itself does not.I would recommend not to use them ever.

I bought this switch with a specific purpose in mind. I wanted to convert a double gang set of switches to one slot so I could install an outlet in the other. One of the switches to be replaced controls the light in a walk in closet. I like motion switches for closets, but this one is on a wall outside the closet. So, by making it a smart switch I could put a stand alone motion detector inside the closet and set routines to turn it on and off.This switch fit the bill. Physical installation was straightforward and easy. Find the supply hot wire and both loads, hook to the marked terminals at the top of the switch. Add a jumper from the neutral wires since the old switches were load only.I followed the directions and downloaded the MOES app and created an account. Tried to add the switch and it warned me about 2.4 GHz wifi only. My ISP provided gateway REALLY wants you to use the same SSID for 5 and 2.4 GHz networks and it is a PITA to change it. I had a 2.4 only extender available and switch my phone to it and was able to set up the switch.Then I went to set up the link to my SmartThings app so I could control it with a Zigbee motion detector. The instructions told me to link SmartLife, which I had already done for some smart plugs I have had for a couple of years. That's when I figured out the MOES app is just a pared down version of SmartLife.Deleted the switch from the MOES app and opened SmartLife. The switch was already detected and added with a single click. SmartLife then made it available to SmartThings and I was able to set the routines using my Third Reality motion detector.So, my advice is skip the MOES app and use SmartLife instead. Integration to SmartThings and Alexa are easier.

These are well designed with button lighting you can configure. They don’t get thrown off the network like many others. Great with Smart Life. We happened to have an almost empty 6 gang panel, so we put six of these in for Whole House monitoring and control. With 4 you start asking “what else can I control”. We put outdoor control on each bedroom plus the adjacent hallway, or lamp controls. Love it.

As I have been digging deeper into the smart home rabbit hole, this smart switch has been perfect to replace my regular switches on Smart light bulbs. It is annoying when you install a smart lightbulb on a regular switch and then accidentally turn the lights switch off. Then that defeats the entire purpose of the smart bulb and you have to manually turn the switch on for it to work again. Installation is really easy and the instructions provided were great. I definitely recommend these smart switches to bring your smart home to the next level.

Connected to the wifi with no problems. Looks nice. Quality is good. Switch is push button. These are early to clean. This is a good bang for ur buck. Definitely recommend

Switch works as intended haven’t had a issue yet and owned for over a year.