HOLEWOR Biometric Drop Down Gun Safengle...

Works perfectly for full sized service pistols. My full size Springfield XD fit like a glove. I usually have a gun light below the barrel which will require removal of some foam from the bottom of the case. My XD subcompact would need some foam removed for it to fit. Modified pistols with red dots, lasers and lights would need foam removal for them to fit. Installation is rather simple. The mounting bracket bolts to a wall or shelf then connects with two tabs and a thumb bolt from the inside. I was able to screw directly to my wall stud while using it two more anchors on the inside mounting holes. Operation was also simple. There are three ways to open the case. Initial operation is through the key which is located on the back of the case. This overrides all other forms of opening the case. You will need to install four AA batteries which were included for the locks to turn on. There's also a USB c port which allows you to plug in an external battery should the double A's die. Once the case is open, you will find a small black button from the inside that prompts you to set up a password or fingerprint. I found that the fingerprint works pretty well and is about 50% accurate on the first try. Luckily the case allows for up to 100 individual fingerprints and I recommend inputing multiple angles and fingers. The six digit code works very well especially when you memorize where the numbers are around the finger pad. This could be a challenge, especially at night when the keypad is not illuminated. Once you press a number the keypad lights up. The case opens quickly illuminating a blue light to help you see. My full size pistol draws easily with no issues. There's also a setting to turn off the voice and audio prompts. I chose this as I do not want beeping sounds when I'm trying to open the case at night. The temperature and humidity gauge is a nice touch. The temperature is within a few degrees of my other thermometers, but I cannot verify the humidity as I do not have that gauge. It is clear that this case was designed for quick access and basic security. If properly secured, it should prevent small children from accessing your firearms. I do believe that the case could be ripped off with a crowbar or other prying device. In my opinion, it still gives reasonable protection and security for most homes. There will be little to know fire or water protection as it is just a steel box that is bolted to the wall without insulation or double wall thickness. This is my initial review and installation so I cannot speak to the longevity of this gun case. It's a rather simple design and I'm sure it should last for a long time. Like any firearm or tool I will practice opening the case at night and in the dark to get comfortable as should anyone who purchases this type of case.

I really like this car setup. It’s secure and won’t become a projectile in the car. It’s easy to setup and add a passcode and multiple fingerprints. I added for fingers in a few different positions and it’ll open every time. Just note that my EDC as labeled in my title is on the smaller side but does have a sight on top, this is important for the following reasons: 1. It’s smaller so I did have to add foam to the bottom for a more snug fit, even then you can see it’s at an angle. 2. Since the FA is smaller it’ll easily fit in there with the sight. Downside: My full size FA fits perfectly without adjustments but since it’s a bigger piece I don’t believe it would fit with a sight if I had one on there. I also think that if I were to carry both and needed to go back and forth it would be a bit annoying adjusting the added foam so they’re both snug. As is, with similar size FAs I really enjoy it. As a mom I’m always heading places I can’t CCW like the library or bank and it’s great to have this easy option where I can lock my FA in my car safely and it can’t be easily taken off. Plus with children in general, I always appreciate having codes and biometric designs on all my safes so there’s no accidental handling from young ones. As far as functionality goes, it’s excellent and smooth. Again, the biometrics make it so you’re accessing the FA in seconds. You can hear the smooth open and close. It’s really a nice system and the price was great for what you get. I hope this review helps and you can get an idea of this will help you.

I was pleasantly surprised by how well this controller performs. It’s lightweight, making it easy to hold during long play sessions, and the grip is comfortable even after extended use. The buttons are responsive, and the analog sticks feel smooth with accurate motion. What stands out most is how fast it connects to the console—no setup issues, just plug and play. I’ve been using it for different types of games, and it handles them all with ease. The battery holds up well and doesn’t drain quickly, which is great if you play for hours. While it may not have the same premium feel as high-end controllers, it definitely gets the job done without any issues. Great value for casual gamers or as a backup controller that doesn’t compromise performance.

I liked that there was a voice system that walks you through the steps to set up and delete finger prints and the other settings. The LCD screen shows the battery life remaining, temperature, and humidity. The light inside seems good. I haven't mounted it yet, but seems easy to do so. Unlocks easily with fingerprints, but seems to need a little help to open the unit and it doesn't just drop or pop open. Good size and seems sturdy. I like that the grip of the gun will be up which would make for a quick draw. Comes with batteries, charging cable, and screwdriver to open the battery panel. HOLEWOR/ MOLICAR have amazing customer service and quick replies! Overall seems like it works as it is supposed to!

I can't say enough good things. Not only are these quality safes with cool features, but the customer service is NEXT LEVEL. After encountering an issue (of my own doing may I add) I reached out to customer service expecting the same run-around you usually get if you get a response at all. What I got was the complete opposite. I got a lightning fast response from a company who genuinely wanted to help. They went above and beyond and I can't thank them enough. If you are looking for a quality safe from a company that stands behind their products AND their customers - buy from this company. I'm a customer for life!

The HOLEWOR Biometric Gun Safe (Model B0C3HLJHT7) is designed with more than just basic security in mind. It not only provides quick access through its highly sensitive biometric fingerprint scanner but also includes an intelligent LCD panel that displays temperature, humidity, battery status, and unlock history. This feature makes it suitable not only for storing firearms but also for keeping sensitive items like documents, electronics, and valuables in optimal conditions. The steel construction, coupled with the anti-pry design, provides reliable physical protection, while the soft foam interior protects contents from scratches. The inclusion of a USB-C emergency power option ensures users can open the safe even if the battery dies. With the ability to store multiple fingerprints, this safe meets the needs of both individual and shared use. It is a great investment for those seeking advanced features and dependable security.

Does it's job, I programmed my thumb about 10 times to get the fingerprint reader to be reliable. My main complaint is mounting options. Right now I have it mounted from the top, and the bracket allows the safe to swing back and forth about 2-3" with a very light touch. I feel like some addition stamping or a weld could have made it much sturdier. The key slot/battery box is on the back of the safe. I would have preferred this to be on the bottom or side and having a rear mounting option. This isn't a secure safe by any means. You could detach it from the mounting point with one thumbscrew, and I'm sure a quick hit w/ a hammer would have it open in short order. It's meant to secure your weapon while you are around to defend the safe if needed. If I leave the house with out my gun, I'll be locking it in a real safe. The stock foam is made for a full sized pistol, like a 1911 or Glock 19. I had to modify it significantly for it to fit a sig p365, and I still dont have as secure of a hold as I'd like. For the price I can't complain, and will upgrade to a better safe when budget allows.

I got this for a gift for my husband and he absolutely loves it. I wanted a safe way to store his gun that was safer than a key or pin. Kids are so smart these days, so the fingerprint security makes us feel so much better. Children are so observant and you can teach as much as you want, they could still get curious and watch you put in a pin or get nosey and find the key. The fingerprint gives us an extra level of security. Setting up is easy and you can put in multiple sets of fingerprints to make it easier to recognize your finger. Its pretty sturdy and comes with a mount to put on side of your nightstand or wherever you’d like to put it. Perfect size for my husbands handgun. Has a blue light when it opens and theres temperature and humidity readings on the front. My husband says he feels so fancy and like an fbi agent went it opens. Happy husband, happy wife, safe kids. Honestly so affordable and worth the purchase!