Anti Slip Floor Tile Treatment Kit for 100sq ft. Non Slip for Slick Tiles. Increases Traction in Minutes on Indoor/Outdoor Tile. Lasts for Years in Commercial/Residential Areas. Includes Cleaner.

The media could not be loaded. These bottles arrive well-packaged with separate screw tight lids, and with seals under each lid. The included spray nozzles attach easily to the bottles. The only instructions are what is shown on the bottle labels. The products do not have a strong scent. The cleaner smells a lot like household window cleaner.To test the product, I applied the cleaner (blue), undiluted, to the left half of a ceramic tile surface, let it sit for 2 minutes, and then flushed the cleaner off with clean water. I then let the tile completely dry out. Next I sprayed the treatment (pink) to that same half of the tile, and let it sit for four minutes. Finally, I lightly wiped off the excess and then again flushed the tile with clean water and finished by drying the tile.The result is that the treated left half of the tile surface looks the same as the untreated, and feels the same when dry. But when a puddle of water is added to the tile surface it clearly has a reduce slip surface compared to the untreated right half of the tile. I also tried stepping on the tile with socks on to see if there is any additional slip prevention when a socked foot steps on the dry tile compared to the untreated tile but was unable to detect a significant difference. So in my testing, the benefit this product provides is to prevent slipping on a wet surface.See the attached 8 minute video to see how I applied the product and then validated its slip prevention abilities.IMPORTANT: Before using these products I first checked the Safety Data Sheets (SDS) for both the cleaner and the treatment by going to the manufacturers website. Be aware that the cleaner SDS appears to be incorrect. It looks like the the cleaner SDS is identical to the treatment SDS, with the exception of the product ID. As further evidence that the SDS is incorrect, the cleaner SDS states that it is a Lt Red liquid, when clearly the product is advertised that the cleaner is blue, also confirmed in my own photos. This is important because if a person or animal ingests or has prolonged skin or eye contact there is a safety risk in not knowing the actual chemical properties and other safety data for both of the included chemicals.

put this product down on my tub works great easy to apply

My bathroom floor is washed daily, so work wasn’t labor intensive. I diluted a small amount of the cleaner and washed the part of the floor I wanted an anti-slip surface. Depending on how well-maintained the floor is to begin with makes a difference. For example, I didn’t need a lot, but if there’s a heavily soiled floor, preparation is more intense. The cleaner is a concentrate where the second bottle isn’t.After my floor air dried, I applied some of the Anti-Slip treatment. There are two nozzles included, but I only needed the one for this bottle. I set the nozzle to stream and quickly saturated the area I wanted done. Now, each surface requires that the treatment be left for three to seven minutes before rinsing. I only needed to leave the solution on for a few minutes before I rinsed it off.I only needed Slip No More for a smaller surface, but it worked quite well. It will work for up to 100 square feet so make sure you have enough to do the surface you’re working on. It was more than enough for the job I had in mind. It’s very expensive at just under $60, but much less expensive than a trip to the emergency room.

I picked this up to help with a major bathroom remodel in case I needed it. I didn't need it for my main tile, but thought it would be helpful with a smaller section of tile that was pretty flat and smooth. Following the directions is pretty simple and it does a good job. After cleaning and applying, you will notice a difference in the tile when it is wet. I haven't had it on long enough to be able to say anything about how long it might last before needing another coat, but so far I've been quite pleased. I have never tried another product like it so I can't compare it to any other brands, but I am happy I won't need to. It did the job I needed it to and I feel safe that we won't have anyone slipping and falling in our bathroom.

This is a lifesaver for anyone concerned about slippery surfaces. This comprehensive kit offers a multi-purpose cleaning and maintaining solution. The tile treatment traction spray effectively reduces the risk of slips and falls, providing peace of mind for households and businesses. The inclusion of a sprayer nozzle makes application easy and convenient. I've noticed a significant improvement in traction on various surfaces after using this product. While individual results may vary, the added safety it brings to floors is invaluable. If you're seeking an effective anti-slip solution, this kit is definitely worth considering.

Does what it says, helps prevent slippery wet surfaces. Worked great all winter long and doesn't take much!

Works well. Used it on an enameled Kohler iron bathtub. Makes the bottom less slippery even with soap and shampoo going on. Nice products. No weird smells or caustic fumes from either parts 1 or 2. Does not make the surface tacky; just seems to add a layer to the surface that impedes slippery film from happening.Instructions require full rinse after application, so I'm not so sure how easy that would be on a full tile floor. In a bath or shower, that is easy, or course.

A pretty simple process to use. Our bathroom floor was like an ice rink for what ever reason lotions and sprays I assume. I was nervous after the first process of cleaning but after second application it was night and day. Did not take long at all.