ANYCUBIC ABS-Like Resin Pro 2, Upgraded 8K 3D Printer Resin with Enhanced Strength and Toughness, High Precision, Low Odor, Wide Compatibility for All LCD Resin 3D Printers (Grey, 1kg)

This is outstanding resin IF you have your printer dialed in. It's incredibly tough, and I've had zero failures since installing a standard etched build plate. The magnetic build plate I was using prior had a mirror finish and it was difficult to get any resin to adhere to it. I did have to iterate different setups to get the most out of this resin, but with a small heater, this resin, and a standard build plate, my Anycubic Photon M3 Max has been producing flawless prints every time. My wife has kept me printing trinkets and decor for around the house non-stop, and I've printed several intricate statues flawlessly.

In the past, I used to use Phrozen ABS and Sunlu ABS like resins but Phrozen was too expensive and SunLu - too thick and viscous. I usually ended up thinning the SunLu with the Phrozen to get it to the viscosity that I wanted. Anycubic ABS Pro 2 - is much better than their other legacy resins. I tried Anycubic in the past and well - it didn't work. The parts in my model are all printed in the Gray ABS Pro 2. It washes off easily with IPA (99%). However, the dye does stain the IPA which is more or less expected. The parts are durable and have some flex to them. I've dropped parts from workbench height onto a cement floor and no problems. Sanding and finishing is easily done. At this price where it's currently <$20/bottle, you can't beat it. I use this resin almost exclusively. I will say that in terms of speed, this resin is NOT the fastest. When I use my Phrozen+SunLu blend, I print at about 2.15 to 2.25 sec/layer. For PURE ABS Pro 2, I had to bump it up to 2.35 to 2.4 sec/layer. Not much but is is technically a bit slower. But I have 7 resin printers running and I really do like and would recommend this resin.

I ordered the 4-pack of ANYCUBIC ABS-Like Resin Pro 8K and it’s honestly one of the best deals I’ve made for resin printing. Not only do you get a great price per bottle, but the quality of the resin is outstanding. It captures sharp 8K detail, prints come out super clean and with a smooth surface finish. But what really makes it stand out is how strong and durable it is compared to regular resin — perfect for both miniatures and functional parts. It cures fast, has low odor, and is very reliable on my Photon Mono M5s Pro. Zero failures so far, and the results look professional straight off the plate. If you're printing regularly, the 4-pack is a smart buy — high-quality resin with great savings. I highly recommend it.

Resin is great. Arrived safely. Be aware that despite that it says next day delivery, once purchased, the delivery date changes to five days later.

Step aside, marble and clay, there’s a new sculptor in town, and it’s the ANYCUBIC ABS-Like Resin Pro 2. This resin is so advanced, I’m pretty sure it’s from the future. It’s the kind of material that would make a Renaissance artist weep with joy. First off, the detail this resin can capture is so precise, you could print out a miniature version of your fingerprint and use it to fool your phone’s security. Not that I’d recommend that, of course. But you could. The durability? Oh, it’s like the Hulk of resins. You could probably print a small hammer and actually use it to hang pictures on your wall. Again, not recommended, but the point stands – this stuff is tough. And let’s talk about the post-processing. Sanding down this resin is smoother than a jazz saxophone solo. It’s so satisfying, you might find yourself printing things just to have an excuse to sand them. It’s like ASMR for your hands. In conclusion, the ANYCUBIC ABS-Like Resin Pro 2 is the dream of every 3D printing enthusiast. It’s like having a mini manufacturing plant on your desk. Just remember, with great printing power comes great responsibility. Use it wisely, and maybe don’t print out a new set of house keys. 🏠🔑 Remember, folks, in the world of 3D printing, this resin isn’t just a game-changer – it’s a game printer. Happy printing!

I have been looking for a quality resin that is not as brittle (glass like) as most standard resins. This ABS like pro comes nearer to what I'm looking for. Still it's not really like ABS and will shatter if dropped onto a hard surface like concrete but it does have a little more flexibility than std. It's also not quite as good at printing details as the Siraya Tech Fast ABS-Like 3D Printer Resins, but it's half the price of Siraya Tech. I think I will use this as my go to resin until I find something better ..

I've used almost all of the Anycubic ABS-Like resins. The majority of them are superior. In particular, the black, which is my go-to resin. It appears that each color has it's own properties. For me, the darker colors like the black and grey are better than the lighter colors such as white, beige, and this clear version. The clear prints flawlessly and has great quality. However, the supports are almost impossible to remove. Most of the time I have to dremil sand them off which ruins the clarity. Clarity wise, the clear turns a bit frosty after curing and not crystal clear even with thin parts. A lot of the prints get ruined due to the supports stuck on and unable to get them off. This ONLY happens with the clear. The white also has some difficulty with supports but not like the clear. The black and grey has no issues at all with support removal. I would not purchase the clear again although the black remains my favorite ABS resin. Just as a note, I've used the Anycubic standard clear resin and not had this problem with the supports the ABS like has

Loving this stuff. I print Dungeons and Dragons miniatures for several campaigns and have gone through 12 kg of this stuff so far this year. I am not noticing any loss of detail between this and standard resin on a Saturn 3 Ultra. I've printed some of the smallest ultra detailed minis from Rescale all the way to their large dragons and even Loot Studios Hag House in all abs pro 2. It doesn't seem to mix well with other resins when I experimented early on. Tried to burn through some standard resin mixed with ABS to get the best of both, but they seem to separate out by density.

Excellent performance 👍

Muy buen material

Perfect I used it for dental models

It’s prints amazing, excellent price and fantastic quality, highly recommended

The quality of the prints are better than the standard resin. So far haven't came across warping in small parts. It is less brittle compared to the standard resin. If you use the auto feed system of anycubic, I have experienced the bottle getting crushed when I tell the printer to recover the resin into bottle