CISBO SB316-8 Parking Reversing Sensor Buzzer, Silver

Bought these for a 2010 Ford Kuga Titanium and they work fine no problem. No issue regarding canbusI Wired into reversing light to activate the rear sensors. I also wired in a reversing light switch (Obtainable from same supplier) to activate the front sensors instead of using the brake light to switch them on.This way of doing it enables the front sensors to be switched off when in traffic jams to avoid them going off all the time when you brake.Needed to wire to a +12v supply to make the system work. Used a spare way in the fuse box that powers up when ignition turned on. Fused the supply with a 3amp fuse using a fuse tap bought off E Bay.The wiring loom for the parking sensor control box had a plug end for the control box and bare end wires at the other end.These are all labelled, one to connect to the reversing wire, one to the +12v supply,one to the brake light wire, (however connected this to the reversing light switch instead), one to suitable earth pointCheck them after installation and the displayed distances to obstacle was very accurate.I would recommend before a permanent installation to do a test wiring of the system with sensors taped to bumpers at positions selected to ensure there are no issues before drilling bumpers.Wiring for switch was done as follows. +12v supply wire taken from fuse box with fuse tap as mentioned above & connected to +12v spade on rear of switch, this wire was then continued back out of the switch spade connector and onwards to connect to the +12v wire of the control box loom. The copper coloured spade on the switch was connected to a suitable earth, local to the switch. The switch spade connector on the switch marked ACC was wired to the brake light wire on the control box loom.Flick the switch and it lights up to warn front sensors active. (When ignition on) Neat touchA Competent DIY'er should be able to fit these with no problem

Won't fit on my car as like a lot of modern cars there are no flat surfaces on the bumpers

Had to return it as it was too messy to self install and the provided instructions make IKEA instructions look better. You cant really do it on your own unless you know what you are doing. But return process was simple and got a full refund, so cant really complain.

Parcel arrived when promised. Unfortunately had to return the goods as they don't fit my car and were the wrong colour.

Me gaste el dinero en un taller y la mitad de los sensores no funcionaban y al mes ya no funcionaba ninguno