Scope Mounts for Howa Super Lite | Integrated Ring & Base Design, Lightweight CNC-Machined Aluminum, Black Anodized Finish, Mounting Hardware Included

Excellent rings, with mounting capability l. Great price and it was cheaper here than every where else I looked. Headed to the range this up and coming week. I also have no doubt that these will hold zero. The height is perfect. Remember dont over tighten, your looking to tighten these down dont use more than 21 ftlbs

Solid rings, fits nicely with my Tikka T3X Lite and Leupold VX Freedom scope.

Added some blue locktite and now it’s held zero for a thousand rounds.

These mounts saved me just before whitetail season. The stock Tikka T3 mounts are known for letting a scope slide, especially on the larger caliber rifles. In the case of my 300wsm, this was a major problem and it was happening. Just about every forum recommended these rings so I picked up a pair of LOW and MEDIUM rings. The low is supposed to be .400 according to Talley. I measured about .480 on the stock ones from Tikka. These arrived in perfect condition and are extremely light. The fasteners are nice as well. These mounted up perfectly and my scope has not moved in the 40 rounds I immediately put through it for testing. If I could recommend anything, perhaps include a small batch of blue Loctite? I did put a small drop on ALL fasteners once I got everything where I liked it. You cannot go wrong with these rings. Worth every penny. A picture is worth a 1000 words here.... The low mounts work perfect with a scope cap on a 42mm scope. Hope this helps someone because the hardest part for me was not knowing whether to get low or medium.

Perfect fit for a Leupold VX Freedom 2-7 on a tikka T3x 223. Easy to mount, Everything was perfectly aligned. Didn't even require any lapping. Lightweight, and significantly cheaper than some other options. As always a durable quality item from Talley.

I really liked the sound of a ring that doesn't need a base. It makes sense in my brain. Eliminate many issues involved with other bases/rings. Picatinny vs weaver, an extra set of screws to fiddle with, is the ring height from the top of the receiver or the top of the base, ect. I've had endless issues with rings and base compatability. So I figured wth. Let's give it a shot. I sat the scope on stacks of pennies. Once I got a height I was comfortable with, I measured the stacks and settled on medium height for a 50mm objective. I mounted these to a Tikka t3x compact lite. The mating was beautiful. Sat flush in position without leaving even a .0005" gap anywhere. The screws went into the receiver nice and snug from the first thread. Very tight tolerance. Now to break out the lapping/allignment kit (it doesn't matter what ring it is, it should be lapped). The alignment was fantastic. As another review for talley rings posted with a picture, the alignment was next to perfect. Lapping was smooth and easy. Took off just enough to relieve the pressure points. Torqued down the screws for the rings to spec and it looks pretty. No extra connections, nice sleek look and that scope is solid. I didn't bed the rings to the action. I didn't think it was necessary between the magnificent fit and low recoil cartridge. But if I think I'm getting some poi shift down the road, it'd be super easy. I liked these rings so much that I ordered a set for a howa 1500 mini action and have been hit with the dreaded backorder. At least at the price I paid for them. Worth the wait.

I really like Talley rings, they are really sturdy and a good design. I am giving them 4 stars because they DO NOT give very good instructions. Beware, the screws that go into the gun and the ones that are in the upper piece to the sides of the scope are NOT interchangeable, something I didn't realize and caused me a great deal of grief. They are close enough to be able to accidentally be put into one another but the threading is slightly different, and the lengths are slightly different. Also, the star wrench they send with it kinda sucks. I have purchased 4 sets of Talley rings (3 of these for my tikka's and one for my CZ 452) and the wrench has broken while putting the rings on for 3 out of the 4 sets which I find very odd, and very displeasing to have to go find your own star wrench while in the middle of putting on your rings.

Tally, tikka lightweight scope rings: solid mounting, needed very little line bore to true up. Good solid mounting for the hunter looking to "shave" every ounce possible from their gear.

Great rings, has held my scope tight for at least 100-200 rounds of 30-06. I usually add a drop of blue loc tite to most of my screws which might have helped a tad. Anyways good light option for hunting rifles.

These mounts fit my T3 perfectly. The low mount is perfect height for a 40 mm scope. When the rifle is placed in the firing position the height is perfect for quick focus and comfort. Shipping was fast and customer service was great.

Great rings, solid and just the right height (medium) for my 44mm objective lens scope.

Amazing

First, the product itself is excellent. The quality and machining are top-notch, and it provides a perfect, low-profile fit for my Tikka T3x Lite. As a piece of hardware, it's a 5-star product that provides a rock-solid base for a scope. However, I'm giving it 4 stars because it came with absolutely zero instructions. As someone new to mounting optics, this was a significant frustration. The challenge isn't just about tightening the screws; it's about knowing where to place the scope along the mount to get the correct eye relief, how to level it, and what torque specs to use. I had to turn to YouTube to figure out the whole process. If you already know how to properly mount a scope, buy this with confidence—it's fantastic. If you're a newbie, just be prepared that you're on your own for the installation. The mount is perfect, but the lack of guidance is a real oversight for beginners. Had to check videos online, which felt unnecessary.