BCH Paper Feed (PF) Gear or HP 90xx Series - Fix OfficeJet Pro 9012 9018 Printhead Carriage Stuck
Product ID: 610275670
The PFG gear is used to fix carriage jams in which the cartridge no longer moves to the left. Instead, the print carriage is stuck to the right. Whether the printer is powered on or powered off, the carriage cannot be moved manually, not even with significant force. The error message shows "Paper Jam. The print carriage cannot move. Open the carriage access door, clear any paper jam or obstruction and select OK ." This replacement part replaces the PFG (paper feed gear), which may cause the problem. Follow the steps in the video below to troubleshoot your printer's problem. If a cracked PFG causes the problem, follow the video to replace it. Replace cracked or damaged drive gear that attached to PF drive rod (see picture below). Make sure your carriage jam IS caused by the broken PFG. Inspection & installation video below. Compatible to HP 9010 Series: Officejet Pro 9010 Officejet Pro 9011 Officejet Pro 9012 Officejet Pro 9013 Officejet Pro 9014 Officejet Pro 9015 Officejet Pro 9016 Officejet Pro 9017 Officejet Pro 9018 Officejet Pro 9019 and other OfficeJet 90xx printers. Review: The replacement gear for my HP Officejet Pro 9018e printer was a perfect fit and solved the problem with the jammed cartridge carriage. It appears that this is a common problem with this and similar models of this printer. It was not the easiest job to disassemble the printer but videos on YouTube helped. One does have to invest in a set of security bit Torx screwdrivers, and they need to be at least four inches long to reach the screws in some deep cavities. Once I replaced the broker gear with the new one, the cartridge carriage was movable again and the printer works well. Review: Lo use para reparar una impresora HP y quedo de maravilla, se le atoro una hoja y colocaron mal un cartucho y se quedo atorado en carrito de impresión. La pieza le quedo de maravilla, viene con instrucciones para curarlo (colocarlo en agua caliente )y para que se pueda poner facil, lo anterior hace que la pieza quede un poco suave para colocarla ademas que en la instrucción indica que esto hace que la pieza quede mas resistente
| ASIN | B0B2X36WHK |
| Best Sellers Rank | #81,478 in Computers ( See Top 100 in Computers ) #65 in Printer Printheads |
| Item model number | PPO-HP-PFGear-9000 |
| Manufacturer | BCH Technologies |
| Product Dimensions | 2.54 x 2.54 x 1.27 cm; 18 g |
D**H
The replacement gear for my HP Officejet Pro 9018e printer was a perfect fit and solved the problem with the jammed cartridge carriage. It appears that this is a common problem with this and similar models of this printer. It was not the easiest job to disassemble the printer but videos on YouTube helped. One does have to invest in a set of security bit Torx screwdrivers, and they need to be at least four inches long to reach the screws in some deep cavities. Once I replaced the broker gear with the new one, the cartridge carriage was movable again and the printer works well.
A**S
Lo use para reparar una impresora HP y quedo de maravilla, se le atoro una hoja y colocaron mal un cartucho y se quedo atorado en carrito de impresión. La pieza le quedo de maravilla, viene con instrucciones para curarlo (colocarlo en agua caliente )y para que se pueda poner facil, lo anterior hace que la pieza quede un poco suave para colocarla ademas que en la instrucción indica que esto hace que la pieza quede mas resistente
S**G
This item is very good. My printer is working well after replace it.
D**E
with the help of the on line video , (no instructions supplied), this was quite ease to fit. for the price def worht it.. saved me buying a new printer
K**.
👍🏼
Trustpilot
5 days ago
1 month ago