Thermalright Peerless Assassin 120 Mini White CPU Cooler, 6 Heat Pipes AGHP Technology, with 120mm PWM Fan, 1500RPM Speed, for AMD:AM4 AM5/Intel LGA 1851/1700/1150/1151/1200/2011,PC Cooler

Perfect cooler, easy install, looks nice, and was the perfect size for a compact case. Great temps and very low noise.

When my lian li 360 LC stopped working, I was rushing to buy another cpu cooler to get my pc working again. This time I wanted something more reliable than LC, because pumps will eventually fail overtime. It was between this and maybe the Noctua. I'm soo happy I chose this, even though zi love Noctua, this was way cheaper and performed just as good. Keeps my cpu temps at 35-40c. Incredible for an itx cooler! Might upgrade to it's bigger brother for more cooling! Happy to know I don't need to worry about pump failures.

Great for budget, cheap, and value for money builds. Noise may vary. I've become a fan of this cooler despite owning two of the Peerless Assassins and other variations. 1st off is the compact nature, and have shoved this into a Zalman Cubix case, literally have 2mm of clearance but allowing the system to run on a Ryzen 5600, some people have run it on higher end hardware like Rzyen 9800s and even the x3d processors. I'm replacing my trusty DeepCool AK400 for a 5800x I'm putting on my primary Bazzite gaming pc. The key of this cooler is the recessed nature of the fan, allowing it snugly fit into places others can't and it offers good cooling. It is best paired up with 1-2 intake fans at the front and an exhaust fan from the rear, ensuring a good flow of air and keeps the CPU happy. For most standard CPUs, I usually see it going from 45-60 C and will go to 80s and even 90s depending how the user pushes the system. I wish Noctua would release a fan specifically for this cooler, the best combo is now noctua fans + thermalright coolers for a superior air cooler. Sure the Noctua fans are more expensive, but combined with the thermalrights sturdy and robust features, it can cool the most aggressive CPUs.

This is a standout performer in my SFF build in an NR200. Steadily handles a 5800x without breaking a sweat, all in a sleek and quiet form factor with easy install

I purchased this cooler to replace Thermalright's fantastic SI-100 low profile cooler due to a CPU upgrade (going from a 5700G to a 5700X3D) and I elected to upgrade my cooling as a result. Cooler was easy to install, since the installation method is practically identical to the Peerless Assassin 120 and the mentioned SI-100 I've used before for my own builds and a few friends. Although cooling was fantastic for a 135mm cooler, VRM temps improved thanks to the low position of the fan, and overall clean aesthetic, the one annoying issue I've noticed is how I received the cooler. The extremely tight packaging resulted in several fins bent when I removed the cooler from it's foam protection. Although fixable with a taped-off flathead screwdriver (to avoid ruining the white finish), I believe a better packing method could be used.

I’m a big ThermalRight fan and this purchase only validates it further. Icy cool temps and very pretty to look at.

I'm done with water cooling. This looks great, and cools almost as well. Less to worry about - I've had pumps die on me, and this is just a cheap fan replacement if it ever gets to that point. Low cost, high performance, looks great.

It is smaller than my SE that cools i7 12700 that has more than 180W TDP but is good enough for 9800x3d that is less than 130W TDP. The installation is al.ost the same and easy. The built quality looks good to me. If you need a short cooler（13.5cm) for 9800x3d, it will be a good candidate for the price.

I needed a cooler because the stock cooler that came with my CPU just didn't cut it. Without really stressing the system much (no overclocking), the temps were approaching 90C. Installing this cooler, the temps dropped significantly by like 20C. Idle temps are now in the 50s or less, and I think it was in the 60s when playing a fairly demanding game. I specifically got the Mini because my case wouldn't have had the clearance for the normal Peerless Assassin. Install was a bit tricky as the fan clips were hard to clip in and screwing the cooler down to the motherboard was a bit challenging while inside the case. It came with a tube of thermal paste.

تم تجربة المبرد على معالج i7 12700f , في لعبة سايبر بانك الاعدادات على اعلى جودة FHD اعلى حرارة وصل لها المعالج 68 ما شاء الله مبرد هوائي اقتصادي رهيب جدا وسعره مناسب انصحكم فيه

The Thermalright Peerless Assassin 120 Mini Black is a solid CPU cooler that’s exceeded my expectations. It's a much more compact design, so it fits nicely in tighter cases but still manages to pack some serious cooling power. The six heat pipes and dual tower design keeps CPU temperatures very cool in sustained stress tests. Love the all-black anodized look. It’s got a clean, stealthy vibe that blends in. Installation was straightforward, look 5 minutes on an LGA 2011 build. Build quality is great as well, the fins don't feel as flimsy as the old Coolermaster kings that Thermalright has been dethroning recently. Performance was wild. 1 hour stress test on a 130W TDP CPU peaked at 63 deg C. That's beating many entry level liquid coolers, without the maintenance. Overall, the Peerless Assassin 120 Mini is a fantastic choice if you’re looking for an efficient cooler. I'll probably get the larger version for my next build.

Awesome for cooling a 9800x3d. Keeps temps way cooler then my noctua no-u9s did.

Bonne capacité et bien conçu pour son utilisation