Epoxy Resin 8.8OZ Kit, Crystal Clear, Non-Toxic, High Gloss, Easy Mix 1:1, DIY Jewelry & Art Resin

So far so good. I use epoxy for live edge woodworking projects, and typically buy the smaller sizes. I made a first pour with this epoxy 2 days ago. It had way fewer bubbles than my previous epoxy, and the working time was good. It seems to have set up well, too. I prefer it to my earlier choice and I'd buy it again from what I have seen. The epoxy comes with clear instructions, stir sticks and small cups for blending as well as some gloves that I didn't need but I am happy with it so far and the price was good. If you need a larger quantity, that would be best as these are 16 oz. bottles. But for my purposes, that is a good thing. They sit around waiting for their next project once in awhile...

As a crafter making epoxy items I can truly say this stuff is GREAT. No fumes, cures glossy clear, no mini air bubbles, easy to mix. I like all the little extras that come with it. I've tried many other epoxy products, some cheaper, some more expensive, but this one is THE BEST!

Crystal clear, long work time, takes color well (don't use too much), hardens in less than 36 for bigger stuff and less than 24 for jewelry. Mix right, enough heat, and leave it alone. All about patience and a good steady heat with a dehumidifier. Amazing results...

I just want to say I’ve never used epoxy resin before I use this kit, my son’s go kart floor was rusted out, but I don’t have a welder to weld in a new plate. So I put in some reinforcements and fiberglassed the floor with this Epoxy kit. I did 3 layers and waiting about 1:30 before each layer it was cold on the day I did it , I used space heaters to help the curing process. For my first time, I think I did a good job, everything I read said epoxy resin doesn’t self level, but this stuff does. The only thing I wish I would’ve did differently is bought some pigment color and automotive glitter and filled in the floor all the way with the epoxy Rez. I used a Bondo fiberglass filler over top of the fiberglass epoxy. Worked great and then on the edges of that use the epoxy resin to firm and everything up. And make it last for years to come. My only bit of advice is make sure that you get your sanding times right if you’re gonna sand the epoxy because once it hardens, the stuff is really tough and difficult to sand. But as you can see from some of my final photos, the epoxy resin worked great as a leveler from where the Bondo was missing but I ran out. But it’s just a kid go kart so who cares? Lol ! Highly recommend this kid if you’re looking to epoxy anything very simple and easy to use. And it’s a quality product and extremely hard and durable once it’s cured. Again, just make sure you watch your temperatures because that can speed or slow things down quite a bit. And when mixing make sure after it’s fully mixed, you let it sit for at least a minute or two this will help get the air bubbles out. It worked great with fiberglass Mat, and I used foam brushes not a chip brush, I found it didn’t leave as much of a texture as the chip brush. And it takes epoxy 3 to 5 days to fully harden so don’t go beat any go kart floors the next day! 😂 so whether you’re using this for fiberglass or just for an arts and crafts it’s good stuff!

It smells way less than others I've used, hardens very clear and sturdy, and the pump makes it easy to measure. Just go slow, I ordered this three times already and have been using the same two pumps. I have bad eyesight so this helps me a lot because I don't have to get really close to the measuring cups to see what I'm doing. Just count the pumps and that's all. I wait till it goes on special before I get it, but even if I didn't it's still cheaper than others brands. It's the fourth brand I've gotten and I think I'm going to just stick with it.