Saturnia 8063005 Water Misting Kit

Description

 Water misting kit. Water mister cooling system that can be easily installed. It lowers temperatures up to 11ºC. It creates a cooling screen that isolates external heat from the cool air. Its efficiency is based on the characteristics of water evaporation. It has been designed for outdoor use and it operates best at a water pressure of between 3.5 and 12 bar (50 to 200 psi). For better effect, the misting nozzle line must be placed around the cooling area. It creates a cooling screen that isolates external heat from the cool air. Before doing anything, mark your desired location for each nozzle and then cut the tubing as necessary. We would suggest a gap between the nozzles of between 50 and 60 cm. The maximum size of the system depends on the pressure and the water flow provided by your water supply. In order to install it directly into your water supply, you can install more than 70 nozzles, but it will not be possible to accurately determine how many nozzles can be installed without damaging the spray quality. Extension: it can be extended to suit your needs, using the accessories that are available with the kit. Filtration: to ensure that the misting system is reliable and durable, the water supply must not contain impurities, as the misting nozzles are extremely delicate. If necessary, install a filtration system to prolong the life of this product. Maintenance: at the end of the season, we would recommend that you follow these instructions: Empty the water from the tubing. In order to do this, disconnect the tubing from the tap. Detach the misting nozzles and put them back on again when you need to use the system. You can attach the specific caps as protection. If the misting nozzles are blocked, submerge them in a 12% hydrochloric acid solution (which is commercially seen as a mixture of hard water and 24% hydrochloric acid) for 30 minutes. Afterwards, rinse them with a lot of clean water. Package contains: 1 x 3/4-1/4 tap adaptor, 6 automatic 1/4 t-shaped adaptors for nozzles, 7 brass nozzles, 1 1/4 plug end for nozzles, 15 attachment magnets, 15 metres of 1/4 tubing.