Thermal Pad, 100x100x2mm Highly Efficient Thermal Conductivity 12 W/mK, Insulated Heat Resistant High Temperature Resistant Silicone Thermal Pad for IC SSD CPU GPU Heat Sink LED Cooling

For the money, it's pretty good.Can be slightly more brittle that more expensive versions but really, it's perfect if you're gentle with it.

I bought this to mount a heatsink on my GPU's backplate to aid with VRAM high temperatures.Pros:- Comes at a fraction of a price compared to reputable brands.- Easy to reapply without leaving a mess. I had to readjust the location of the strips a few times and never had trouble removing and reapplying them.- Brought VRAM temperatures down 10 deg Celsius, so it works.Cons:- I think it has higher hardness than Gelid Ultimate. Meaning, you will have hard time applying this thermal paste on uneven surface such as applying a single strip spanning multiple SMD components of various heights. In my case, the GPU backplate had a slight bulging and this thermal pad did not help at all to compensate with this. As a workaround, I cut the pad into separate strips, and try to carefully push against some to force them to make contact with both surfaces.Overall, it works very well with even surfaces. It's an affordable solution if you need a large quantity for even surfaces.If you plan to use this for a GPU backplate, remember that a heatsink with thermal pad is not enough. You need a fan as well to aid in cooling.

I have a 2080ti and I use this thermal pads to repaste my graphics card and it decreased the temps around 6c it used to be 78c now repasting it hold temps around the 72c

Thanks

Old 1070 was having thermal issue when playing BL3. Made a big thermalpad fill so the board contacted the backplate through the pad. Also replaced VRM and VRAM thermal pads along the way in the front.The thermal pad came through the mail and there was a big fold mark on the protective films, the pad sandwiched between was unaffected. There were ~1-2mm silicon chipped off near the edge probably due to shipping and handling. Both could be avoided if the pad was shipped with a cardboard inserted and used do-not-bend stickers.