INCLY 276PCS Extra Thick Pegboard Accessories Organizer Kit for 1/4 Inch Pegboard, Heavy Duty Black Peg Board Hook Assortment with Bins, Paper Towel Holder for Hanging Storage, Garage Wall Attachments

Really good quality and big big selection of hangers.

This Accessory Kit is equipped to hang all types of your tools Large , medium and small and all shapes a must have for any garage.

Best thing about this is you will have more hangers than you need! Which is really what you want because you always need to hang more stuff. The metal is coated and thick so it’s tough and doesn’t bend. The little plastic trays are the only bad thing because they just are not solid on hangers and wobble a lot. U can see in picture they tend to twist and are not even with other ones, but they work and are just deep enough to hold long screws or even tools and there is a lot of them. The only thing I had trouble hanging was large vice-grips.

This is actually a nice Assortment of pegboard accessories. However, these hooks are nowhere near the 1/4" diameter claimed in the description. I used a metal drill bit index card to measure these hooks and they are exactly 13/64 of an inch or 5.16 mm in diameter. This makes these pegboard hooks "theoretically" too large for 1/8 inch pegboard holes, and too small for 1/4 inch pegboard holes. That being said, these pegboard accessories "can" be forced into 1/8 inch holes (on wood pegboard), and they will work in 1/4 inch pegboard holes using the generous supply of spring retainer clips on the single shaft hooks. The dual shaft hooks, and multiple tool racks and storage bins, work well on their own in 1/4 inch pegboard holes, but the single shaft hooks definitely need the spring retainer clips or they will come out of the 1/4 inch pegboard holes when removing the tool that they are holding. The spring retainer clips do work well to hold the single shaft hooks in place. However, there is a technique to getting them to stay securely in place. Once the retainer clips are forced into two pegboard holes, they have to be pushed to the very top or bottom of the holes, where the diameter is smaller, or the clips will keep popping out on their own. I learned this the hard way after being smacked in the face a couple of times by a flying retainer clip that didn't stay in place. Safety glasses are highly recommend when installing the spring retainer clips. The 12 orange, plastic storage bins are a nice feature, and they can actually hold quite a bit of weight and volume. The pronged tool holders and screwdriver racks are also very useful items. There is also a large assortment of rubber tips in two sizes that go on the end of the pegboard hooks and tool racks for better tool retention, and also scratch protection for the tools and the user. One warning. Be prepared to do a LOT of sorting when opening the box of pegboard accessories. While the spring retainer clips, rubber ends, and dual prong brackets for the storage bins are all neatly wrapped in plastic bags, all of the rest of the pegboard accessories are just thrown in the box. This causes a lot of the accessories to become intertwined and hooked together (oh what fun!). Overall, this is a nice set of pegboard accessories with more items than most people will ever need. The quality of the accessories is quite nice, especially with the black powder coating. The inclusion of the spring retainer clips and rubber tips are also nice features. However, I have to deduct 1 star for the fact that these pegboard accessories are nowhere near the advertised 1/4 inch diameter. I do recommend these pegboard accessories, but buyer beware that these are not 1/4 inch as advertised.

Just got my new pegboard hooks and they are super high quality and fit great in my pegboard. Any reviews that claim they are loose are technically correct but that is the design of how they are supposed to fit. Any thicker and they would be difficult to place in and take out. They function well and are absolutely heavy duty as they claim. I like that they are coated to avoid rust and so far I have had no issues with coating chipped off. I will say that the bins that come with this are pretty nice but the peg hardware to hang them are thinner (more like 1/8". That being said I did not buy this set for the bins and im sure if ypu dont like them, you can use them somewhere else or even screw/bolt them into the pegboard. Lock wires are thinner than I expected, but that doesnt mean they wont work. If you dont like them, you can get other ones or even hot glue them in. Best value for money I have found. Go ahead and place the order.

The majority of the items were make well. There were a few of the double ended hooks that the spacing between the 2 rods was to wide and they would not fit in the peg board. There was no way to fix those as bending will break the weld loose. Some of the double ended ones also had one leg that was bent to far and the hook would not lay right when installed in the peg board. Those could be bent in to position with pliers. Over all pretty good for what they were.

Slick kit for a lot of pegboard storage. Nice thick hooks that fit better than the cheap ones from HF, and the rubber grommets make the fit even tighter. The locking clips are the best part to hold the hook from popping out of the hole when you take something off the hook. The bins are very useful too if you have room to put them. I have a large shop with heavy duty steel garage cabinets and closets. Inside all the doors are peg holes. And every door has things hanging on them now thanks to this assortment

The quality of these accessories is very good; I highly recommend the 1/4” size that fits more snugly into the pegboard holes than the 1/8” size. The assortment is good and fits most of my needs. The “bins” are a nice addition to hold screws, nuts, bolts, etc. This is a good solid set for most of my tools, etc

Good product as a hook for everything I needed ,sturdy hooks would buy again

Very, very handy for my shop wall pegboard! Very happy with this product for hanging tools and accessories in my shop

Lots of pieces but the bins slope up and I tried to straighten it out but broke two of the supports. Don’t do that!

Loved this purchase. Great quality, sturdy metallic hooks and comes with fastening clips. Will buy again if required.

Worked great heavier made than most