D-Line 13.12ft Cord Hider Kit, Patented Cable Cover, Hide Wires on Wall, Channel for TV Mount Cords, Raceway Wire Hiders, Paintable, Adhesive, Half Round, 4X 1.18in W x 0.59in H x 39in Lengths, White

This cable cover kit worked perfectly for my application and came with enough connectors of different types to turn corners and terminate the run. It was very easy to install and had plenty of room for 10 20 gauge wires with butt splice connectors staged at different lengths.

I'm so pleased by the quality of this channel. Each piece came with a protective film that saved it from scratching as I cut it to size (which was easily done with a cordless jigsaw). After a light sanding, it took paint very well! The adhesive is strong and the plastic itself is thick and sturdy. I really like the D-shape of the channel: perfect to fit the cord of my pendant lamps without being too obtrusive. I'd gladly purchase this brand again for future projects.

I purchased this for the power cable of our baby monitor, which runs vertically from an outlet near the floor up to the monitor, which is about 6' above the floor. I wanted it partly to make the stark white power cord less of an eyesore, and partly to prevent my son from grabbing the cord or playing with it. This product worked perfectly. Fortunately we had some paint left over after painting the nursery, so I was able to use that to paint one of these channels and make it less of an eyesore. As another reviewer suggested, I sanded the channel first with some 200-grit sandpaper. It's visible on the wall, but not something you notice, and it certainly looks a lot better than the dangling white cord did! The adhesive seems to be holding fine so far to the painted drywall. Inserting the power cord was easy, as the whole channel sort of swings open.

As you can see in the pictures these were installed outside on stucco. It has rained twice (we live in Florida so no surprise) and so far they remain firmly in place. The packaging was great, the instructions were clear and they are very easy to cut using standard aircraft snips. We couldn't be happier as they added a beautiful finishing touch to our outdoor awning installation. I would highly recommend. If additional adhesive is required at some point I'll amend my post.

The half-round profile blends in with baseboards very nicely, if you happen to need them there. If you were looking at them from a distance, they could both appear as a single, original moulding. When looking through reviews, there seemed to be a mix of people saying the adhesive was either too strong or a bit weak. I considered using some known 3M adhesives to sidestep either issue. However, I had completely forgotten about this until I had already started installing them. The units I received definitely had very strong adhesives, to the extent that they will certainly remove paint should they need to be removed. In our case, they are being run along the top of baseboards and this strength is far preferable anyway. This is in an area where there is a lot of movement and anything not strong would be worse long-term and there is no intention to move them around. Worse case scenario, touch-ups are not hard to do. However, if one may not be entirely sure about placement; it would be advisable to use a known, non-damaging adhesive temporarily or permanently. So far, I’ve not made use of the connector bits. Instead of using the straight couplers, I just left small gaps for future access. I only had one corner in the installation, but did not want to bend the coax cable enough to use the 90° coupler. The looks in these spots were not of concern anyway. I can see how these pieces would be cause for frustration if you are planning to need them, though. They fit loose and feel like they would easily come off. Was not a concern for us though. I’d buy again if needed.

I really like the easy access to place cords / wires into the D channel. The material is easy to paint and looks great when done. I highly recommend this product.

Bought this micro raceway kit to help conceal the single wires for rear satellite speakers that are part of my TV's surround sound system. I did not like seeing the exposed wires running up the wall to the speakers so this micro size worked great for their concealment but there are drawbacks with this product. The adhesive strips on the back of the conduit pieces were sticky in some areas and held to the wall but in some places not sticky enough so it caused it to bow out in places. Then in some areas it was so sticky that if you did not place it how you wanted it then it could not be adjusted so be sure to check the placement as you remove protective film on the backs of pipe runs. The flat 90 elbow fittings that I used did not lock well on the pipe runs and would not stay flush against the wall and they would fall off easily so I had to use clear scotch tape to make sure they stayed flush and on. Installation is easy and the run pieces can be cut to length with a hacksaw and they are paintable so that is nice but 2.5 stars at best overall is more realistic.

I needed more outlets in my bathroom so went with a power strip. However, this would have left an y slightly cord dangling from the outlet and getting in the way of the space there That’s where D-Line came in. Already lots of reviews and that’s what made up my mind. The size of cord they would take was just big enough for the power strip cable and the adhesion worked really well. I stuck this onto a glazed brick and it is solid. The product was well made and did exactly what it should do. It stuck well, covered the cable, made it look neat, and appears will last a long time. Make sure you have something to cut to length. I had some large tin snips that works well, otherwise have a saw. Also easy to place to go around corners and came with just enough corners covering pieces. If you have lots of corners to go around, buy another pack or two of just those pieces.

It's really perfect, wish if there is more with a good offer so I can get as I need, price was a little bit high, but these D-line was very helpful and it's stick on the wall strongly.

I can't say enough good things about this cable management system. I bought a home with an already finished basement, so an in-wall wiring system for my home theatre was not an option. I set up the AVR at the back of the theatre, so I had to run 3-12 gauge speaker wires and one 28AWG HDMI cable from the front of the room to the rear, about 40ft. of cable. This system definitely fit the bill. Yes, all of the wires fit inside the channel. Everything is completely hidden and all that's left to see is a new baseboard!! :) So simple to use and does the job wonderfully! I actually need more now.

It takes a good sharp serrated box cutter to cut these to length, so no need to worry about strength. Make sure you position the strip right and where you want it, AND clean the wall where the tape is contacting or use anchor screws through the inside every couple lengths if it's a permanent install or the cables have weight or overhead. They are hinged on the same side to accommodate the links to join the strips, but the links aren't bidirectional, so do a dry run first before removing the backing of the tape and pushing it in place, as the adhesive tape will probably rip the paint if you pull it off if you already pushed it into place. Only time will tell for longevity of the adhesive pad, but if it's as good as the 3M brand, it'll be there a long time without releasing.

Fantastic product. Easy to use and assemble. The connectors are a good fit. The glue on the system is super strong.

Nice