techsolUniversal Above or Under TV Soundbar Mounting Bracket Completely Adjustable for Speaker with 33 Lbs Weight Capacity - Fittings Included

They work very well but expensive. Still get what you pay for I suppose

Really should be made with a bit more rigidity, these are flat sheet metal plates which attach to the mounting holes on the soundbar and with those on the mounting plate holes on the rear of a flat screen tv.unfortunately there is no stiffness from front to back when fitted as they are flexible on this axis so the feet of my soundbar needed to be on hooked over the front of my TV to stop the whole bar from slipping back and downwards for it to be safe.Luckily I work for an engineering company and was able to get them offset slightly so the soundbar was actually supported by the edge of the TV. (not something everyone has the ability to do))

Looks smart under tv

Not bad a bit thin done the job

Does the job

Bit fiddly but works really well. Stronger than I expected.

Ok piece of kit, needs a few more nuts and bolts in kit to make it truly universal.

Did exactly what it said on the tin!

Llegó. Lo instalé en menos de 10 minutos, sin ayuda. Quedó perfecto. Sinceramente uno de esos productos que hacen ver lo maravillosa que es la ingeniería simple, pensada para el consumidor.

I've had these installed for a couple years now and they work well. They are supporting a soundbar below a 42" LG TV on an articulating wall mount. The long slotted holes give you several options for attaching to both the sound bar and the supporting wall mount/tv. Beware: the mounts are flat sheet metal without any reinforcing ribs, so the mount may flex a little when moved, depending on how far apart your connection points are. In my case, the connection points are near the opposite ends of the brackets, so the metal flexes slightly with the weight of the soundbar. My TV is in the corner of a room and never moved, so this is not a problem for me. The slight bend in the metal did cause one issue that was easily corrected: high volume from the sound bar would cause a vibration in the metal mount where it passed over the metal surface of the tv mount - several inches away from the connection point. Took about a year before it occurred in my case - and it stopped when I added a layer of tape between the surfaces (well out of sight and not visible). Overall, I have been pleased with this purchase - the mount is out of sight and the price was right.

Funktioniert perfekt,Mein 55 Zoll Fernseher hängt bombenfest. Super TeilIst wirklich stabil.Und sieht auch noch gut aus, in schwarz.

No sirve para mi barra de sonido Philips, la parte que va atornillada a la tv queda muy separada de la parte superior donde va la barra de sonido,si esperas que quede justo encima de la tv olvídate, trae mucha tornilleria de la cual no me ha servido ninguna para la barra ni la tv.No entiendo que se pueda decir que es universal pq la verdad ni tv samsung y barra philips son convencionales y no ha servido.No lo devuelvo porque tiré la caja y la tornillería la tengo mezclada y ya no se cual es cual.Una decepción, dinero tirado.

Decent construction, and these are exactly as they appear in the image, unlike some other listings here on Amazon. My problem was that my Vizio E50-C1 uses a small Vesa mount (200 x 200), meaning that the mount holes these are meant to go in are quite a way from the edge of the TV. I was just *barely* able to get these to reach my Vizio 38" soundbar. It would be impossible to put the soundbar on the top of the TV using these on my TV, because they're floppy and again the mount holes are near the center of the TV on this 50" set. I ended up with it at the bottom, where the soundbar hangs from these in quite a floppy way, despite being tight against the TV, so much so that when I swing the TV on its mount, the soundbar wobbles around for a few seconds before settling. Two-sided tape between these brackets and the TV solves that, but it's something to consider. Check you vesa mount holes before ordering. If they're in a small square near the middle of a large TV, these probably won't work.And they're too expensive for a couple pieces of powder-coated metal. I only paid fifteen dollars more for an entire articulated mount. I couldn't find them any cheaper, so I bought them, but I could have fabbed something from a couple pieces of scrap metal that would have worked as well, and you never see them so the look doesn't matter.