FLISSA Multitool, 18 in 1 Camo Multitool Pliers with Fire Starter, Window Breaker, Whistle, Stainless Steel EDC Gear with Sheath - Perfect for Survival, Simple Repair, Outdoor, Camping

Recently, I read an interview with Mr. Tim Leatherman from 2019 in which he stated about the Leatherman clones coming from China, "The price is about one-tenth of ours, but the quality is about one-twentieth. Nevertheless, the day is going to come when the price is 50 percent of ours but the quality is 80 percent."Well, unfortunately for Mr. Leatherman, that day is here. The Leatherman Wave's patent has expired, and now the opportunity for a true Wave clone is possible.Enter the Flissa 16-in-1 multitool.This is the closest to a Leatherman copy I've ever seen, along with the Ozark Trail Multiforce, and the price is about 25% of the Wave and the quality is near 90%, at least on the particular Flissa multitool which I've received. Results may vary. I'll get to the 90% in a minute.Compared to the Ozark Trail Multiforce, the Flissa is far smoother to fold and unfold, the liner locks are much less stiff, and the Flissa features replaceable wire cutters and a precision glasses screwdriver, while the OT Multiforce does not. And the Flissa is cheaper to boot.Now for the mandatory Wave comparison, I will admit that I no longer own a Leatherman Wave. At one point, however, for about two days, I did. I decided to return it based on the buyer's remorse associated with paying over $120 for a single tool. Therefore, I don't think I'm qualified to compare this Flissa tool to the Wave, but I must say that the Wave was a fine tool when I handled it, although definitely not fine enough to warrant a 4x price differential from the Flissa.Anyhow, I digress. On to the actual tool itself.The black coating is painted on as opposed to being oxidized black. This means that over time, the paint will chip off and the tool will be less black. Leatherman paints some of their multitools as well, such as the Skeletool and Signal. I don't think it is a problem.The only other problem with this tool is that if you order the black version, prepare to sharpen the serrated blade, as the blade is painted over upon arrival. This wasn't a deal breaker for me. I can sharpen a blade if it means saving $100.These issues could likely be avoided by buying the plain stainless steel Flissa, but I like the look of the black one better.Those are the only reasons I would say this tool is 90% the quality of a Leatherman Wave, based on my limited experience. That, and the Wave using slightly better steel. I don't notice a difference.I can say for certain, however, that this is the best copy of a Leatherman Wave I've found so far, and while some people may deny it - probably due to the embarrassment over having spent $120 for a single tool - the Flissa seems like a very good alternative to more expensive options.Hopefully this can be a wake-up call for Leatherman to stop overpricing their tools and start truly innovating again.

It has taken several years for these imitations of the leading brand to attain quailty, but I would say that this tool does it. I have purchased it in both black and silver versions. The tool set is very good, and includes all the main tools offered by the leading brand version. The main difference is that this does not have the proprietary flat screwdriver bit holder (like Wave does) but instead has a double end bit holder with ball detent. You can purchase other double ended bits on Amazon that will fit this bit holder and makes the tool even more versatile. I don't use this daily, so I can't speak to durability yet, but so far I have had no quality issues with any of the tools on this, they all function well. A note to Flissa, a built in or optional pocket clip would be a good addition. All in all, this is an incredible value when compared to the current pricing of name brand, and will be a lot less painful if you lose it. Definitely recommend.

With coupon this was $26. My wave+ was $109 or 4x the price.Fitment is good. Able to one hand blades and they are reasonably sharp. All blades and implements are correctly stamped . All locks work fine.Finish. Not great. I immediately noticed the square edges of pretty much every inch of the frame as soon as I held it. Edges are not beveled. I cleaned edges up in about 20 minutes with a diamond stone. Much better now.Is it durable? That depends on what you consider durable. The wave+ is not a heavy duty tool nor is this. They are both light or at best a medium duty multi tool. Is the Leatherman Wave+ better? Definitely but it cost 4x as much. This is a decent budget tool that is okay for most light duty tasks. I EDC this at work and EDC my Wave the rest of the time.Complaints.Bit driver needs a magnet alsoBetter finish from factory

This multitool is awesome!! I'm happy with the quality and purchase, I've had a Gerber in the past but wanted something different, the craftsmanship is better than I expected, good work guys!

A truly well machined 90 percent copy of the wave plus. Grip is the same, rounded and comfortable. Socket screwdriver is full size standard hex, snap in, it is better than the wave flat screwdriver special socket. This I think is it’s best feature as you can buy any standard drive head accessory to fit it.Both knives are perfect copies and as good. Small eyeglass screwdriver isn’t a socket like the wave but is very good and well machined. Pliers are exactly the same as the wave including the replaceable cutter edge. The only issue is that the plier handles don’t snap in place as securely as the the wave. The scissors are good but quite a bit looser than the wave and not as well designed. There is one often overlooked item which makes a big difference, the pull out lanyard eyelet in the wave which is pretty awesome and useful isn’t available on this unit. Last but not least, the file is awesome, one side is diamond coated and is fantastic for sharpening knives. The other side is a standard metal file for cutting the bars on the jail cell window when needed.