M MINGLE Ball Valve Pressure Washer, 3/8" Quick Connect Ball Valve for Power Washer Hose, 5000 PSI

Quality tool. Works well after multiple uses so far!

Great DN10 for the money! Bought it and have use it multiple times and was well worth the money I paid for it. If you are looking for a budget friendly ball valve I would buy this one. The weight is very good and heavy duty. Its easy to put together and easy to use. Its a design is simple and works just like it should, I love mine and would buy again

Arrived overnight. Well made. Tried it out today attached to my pressure washer. Enables me to change what’s attached without shutting down pressure washer. Nice product.

Works great just as described bought a couple more

thread was a bit sharp but it works....I used teflon tape on threads....no air leaks

Chinese junk. 1st one ordered failed under pressure within 10 minutes. Replacement worked for around 2 hours . Ball valve stuck in closed position, with no way to open or let out trapped pressure. Had to use channel locks and wrench to loosen nuts to let out pressure. This was during a job at 11 pm. Lost at least a half hour messing around with valve. Lesson learned . Save yourself the hassle and buy the real deal for a little more money.

Well-made and works great

When I went looking to upgrade my SunJoe SPX3000 pressure washer (2030psi, 1.76gpm advertised), I was at a loss at how many adapters I would need to replace the long wand with a shorter pistol style wand. After watching quite a few videos, I learned that most SunJoe products use a less common M22-15mm hose connection (female end on the hose). Most wands used a more common sized M22-14mm or 3/8" fitting. Since I purchased a Sooprinse High Pressure Washer Gun that came with the M22-14 fitting (male), I needed an adapter to bridge the gap. Internet searches pointed me towards a series of quick disconnects, swivels, and adapters to make all of those work. While it may be very functional and get the job done, I didn't want to buy that many adapters for a budget pressure washer to wash my cars with. In a nutshell, I needed an adapter from the SunJoe hose to a smaller wand/gun: M22-15mm male end to fit into the SunJoe hose, and M22-14mm female to fit into the wand/gun. This part fit perfectly and even came with a tiny bit of white teflon tape to seal the connections. I did add a slight amount of grease to the O-ring on the hose side before sliding it into the adapter, and used wrenches to tighten everything up as tight as I could. For my configuration, I have no swivel or quick disconnects, so the angle I set my gun relative to the natural curl of the hose is fixed. I fiddled with it a bit to get it as natural as I could, but once set and tightened, I was happy with the position and cleaned my patio with ease. Would a swivel help? Yeah, but the added expense and position where a leak could happen turned me away. If you are looking for this specific combination of SunJoe hose with Sooprinse High Pressure Washer Gun (https://www.amazon.com/gp/product/B07KPVM5MS/ref=ppx_yo_dt_b_asin_title_o01_s00?ie=UTF8&psc=1), then it will work!

Çok kaliteli ancak 3 adet makinamın hiç birine konnektör bağlantısı uymuyor .Sonuçta ürünü kullanamıyorum.Basınçlı hortumları 14 mm olduğu için uyum sağlaması.Ürünle beraber 22 to14 mm connektör verilseydi çok iyi olurdu.Bu connektörü ayrı satın almak istedim ürünün yarı fiatı kadar ücreti var.Şimdi bu connektörü ucuza bulursam kullanacağım .Yoksa bir kenarda duracak

You need this in your life if you use a pressure washer for anything. I mainly use a Karcher for cleaning cars, bought the correct adapter for Karcher quick release to fit to the Mingle. Fitted the red tip and was instantly amazed at the power…the red tip would strip paint. Changing tips increases the size of the spray fan. Black reduces to a heavy shower, ideal for watering the lawn. Easier to use than the standard Karcher lance. I can’t express enough how impressed I am.

La medida muy comoda

At Rosie Dazzlers, this pressure washer coupler has been a great addition to our equipment. It connects securely, doesn’t leak, and makes switching hoses and attachments effortless. The durability and high PSI rating give us confidence that it will last. A must-have for keeping our detailing work running smoothly!

Accurate description, M22 15F to M22 14M