ID-COOLING FX240 PRO Liquid CPU Cooler for Desktop - 240mm AIO Cooler, 2 x 120mm High-efficient Fans, Special CD Pattern Pump Header, Intel & AMD Compatible

I have been building PC's for 20 years and have always purchased high-end brand name parts. This is the cheapest cooler I've ever purchased for a PC and must say I have zero complaints. I've been running it for a month straight now with no issues and don't expect any. It is quiet, maintains a cool temperature, and the cooler itself looks sleek and simple which matches my entire all-black build. No frills, just black on black quality cooling for a solid price. If the aesthetic is what you're looking for and it helps out your budget, I would recommend this cooler all day. If you are looking for an affordable, yet quality AIO I would also recommend this one all day. Pleasantly surprised.

ID-COOLING IS MY FAV LOVE THE BRAND OVERALL QUALITY IS OUTSTANDING! Performance is better than BRAND names , VERY QUIET , PERFECT INSTRUCTIONS, Easy mounting installation clear.

I am using this in an A4-H2O and it gives some of the best performance to dollar of any radiator. It is a plain black so it looks great in any case, the height of the cold plate and a standard 240mm radiator allows it to fit in most SFF cases. The installation is very straight forward and takes maybe 5 minutes on the first try, then can be taken on and off repeatedly without any problems. It provides amazing cooling even though it's inexpensive. Due to the price, it also leaves room for upgrades, such as the Noctua A12x25 G2 or Phanteks T30 for even better performance.

For the money this performs very well. Sometimes after extended thermal load (hours) I will hear this trying to move bubbles. It sounds like static or grease popping. Otherwise I think this is a reliable AIO cooler at a very low price. On par with Corsair. I haven't tried Arctic since they are too thick for my Lian Li A3 case. I recommend this for the money. Its 240mm so you can't expect 360mm performance but I'm still getting very good thermals. Instructions are limited but if you use common sense and take your time, it's very easy to figure out.

This is my first AIO cooler. The install was easy and it included all of the components to install with a 1151 series intel. The fans seem to be pretty quiet and move a good amount of air. Overall the finish is nice and the good packaging allowed for all of the rad fins to be intact and not bent up. Seems to perform pretty well and keep the cpu cool.

Nice cpu cooler, inexpensive. It is not filled completely with coolant. I can hear the coolant sloshing a bit, If there was no RESIDUAL air in it, I should make no noise. Air bubbles may interfere with coolant circulation. Taking apart the cold plate requires a special, 3 lobe screw driver, and it may leak afterwards, So I am just keeping an eye on the CPU temp. The 2 fans it comes with are rather noisy. May be worth it to swap them out to Noctua or BeQuiet. I may do that, I have them on hand and update the review.

Works as advertised. I don't like all of the lighting effects of other AIO CPU coolers and have my system blacked out. It was simple to install, comes with AMD and Intel backplates, all of the screws, etc. It keeps my Minisforum B795M motherboard/CPU combo nice and cool. I front mounted mine in my case, so I flipped the fans so that it vents into the case to improve airflow. I have three other fans pulling air out and it works beautifully. It was simple to flip the fans and they have double sided silicon bumpers to minimize fan noise. It comes with thermal paste so don't waste your money on that. Five very big stars!

This is probably the first and only AIO I will ever buy because for what it is it’s really good. Good cooling for my Ryzen 5 3600 (overkill) but instructions were a tad bit confusing, needed some help. It’s been used for over 100 hours now and it works fine still, I can hear some humming though, and some water. It’s a metal built so it’s very durable.

Keeps my ryzen 5 7500f perfectly cool while not using to much power 👍

ちゃんと冷却できる

Istruzioni abbastanza chiare anche per chi non se ne intende e dissipa veramente bene

I previously had an Arctic Freezer III in my build and when the pump failed, I decided it was a good opportunity to explore other options. I went with the FX240 PRO, having been impressed with ID-Cooling products in the past, and I’m genuinely glad I did. **Look:** The cooler looks excellent in the case. Clean, understated, and premium without being over the top. The tubing and pump housing in particular give off a much higher-quality impression than the AIO it replaced. **Fit:** Installation was considerably easier than the Arctic Freezer III. Everything lined up perfectly, the mounting process was straightforward, and the daisy-chained fans made cable management far simpler than expected. **Functionality:** The daisy-chained fans are a great touch, making header connections quick and tidy. After around 30 minutes of runtime, it’s already noticeably quieter than my previous AIO while maintaining solid performance. **Size:** The 240mm form factor fits comfortably in the case with no clearance issues, and the tubing is flexible without feeling flimsy, which made positioning stress-free. Overall, I’m really, really pleased with the purchase. It feels like a meaningful upgrade in build quality, ease of installation, and noise levels — exactly what I was hoping for when switching AIOs.

Lian LiのA3-mATXで使用しています。 Ryzen 7 9800X3Dに使用していますが、ゲーム等をしても動作は安定しています。 1点、起動してから数分だけファンの音が気になります。 (何かケーブルのような物に触れているような音) 数分経過すると音が消えるので、それ以降は静音で動作も安定しているので非常に良いです。