Booster Pump Complete Kit for Home RO Reverse Osmosis Water Purification System, Quick-Connection Design, High Pressure Switch

Great pump. Easy install. Not silent but quiet enough during its short runtime. Added an inline 12/24v micro switch for easy shutoff for service. Only thing I can’t speak on is how durable it is, time will tell.

My incoming water pressure at tap is 40psi. This pump runs the pressure up to 125psi....my RO Buddie system at 125psi is way more efficient now. Takes about 1/2 to 1/3 of the time it used to. Also makes the filters last way longer than expected. Both a plus!!! Easy to install and No leaks.

Second update: The Pump housing on the first one Cracked open spraying water everywhere. UPDATE: I ordered a second one because the first was so good, but the second one has a bad switch. It will not turn back on until pressure drops to about 14 psi. The first one turned off at 40 and on at 60. I attempted to adjust the second one with the screw and I could adjust the turn off up and down but the turn on stayed the same. Poor quality switch. Too bad because the pump its self works great and is pretty quiet. Original review: So far so good, definitely improved output of my RO system. Much quieter pump than others I have had. I actually had to put my hand on the pump to make sure it was running.

Its not a bad clone of a 6800 aqua except you cant adjust the pump. I had to take 1 star off cause it took my pressure from 30-40 and was burying the needle on my rodi system at 125psi . I was set to return it as if i lowered the incoming water by partly closing the shut off valve or the Y split valve the lines would make a horrible banging noise. I had a work around in a way my own pressure regulator that came with the rodi system. my system had an inline on / off valve almost like a membrane flush valve. I closed it somewhat and no horrible noise and my psi is about 77 psi post filters pre membrane and di. This works for me as if i need to add more DI stages later I can and i know i have the psi to back it. Its value isnt too bad for the cost saving a dcent amount off the name brand one. I havent seen any leaking and it was easy to install thanks to using 1/4 connectors unlike NPT screw in. The seller did say they were working on a less powerful pump just be warned you may get more psi th an intended and have a shut off valve or inline regulator if going to use this pump.

I needed a booster pump that had the ability to adjust the pressure output. This Hanchen pump did not have the ability to adjust the output pressure for my RODI system so it did not meet my needs. If manual adjustment of the output water pressure is needed to optimize your RO system, look at other booster pumps that offer this feature.

Works as described. Easy to hook up.

The replacement item worked just fine

does everything it was advertised to do