A 500GB Internal Flash SSD Upgrade for your 13" or 15" MacBook Pro with Retina Display (Mid 2012 - Early 2013) with Everything You Need to Get the Job Done Right! Your MacBook Pro 13" or 15" with Retina Display (Mid 2012 - Early 2013) is a high performance machine requiring the very highest performance flash drives available today. The MCE 500GB Internal Flash Storage Upgrade Solution for the Mid 2012 through Early 2013 MacBook Pros with Retina Display replaces your original flash drive and, at 540MB/s Read and 520MB/s Write speed, is designed to take advantage of the super-fast flash architecture present in those machines. Included with the upgrade is a USB 3.0 Enclosure for the original flash drive to facilitate easy data transfer, cloning software, all the tools necessary to perform the upgrade as well as an illustrated installation manual. Everything you need to perform the upgrade is included! Plus you get US based Tech Support and a Five-Year Warranty!Compatibility:Please verify that your MacBook Pro with Retina Display is either a Mid-2012, Late 2012, or Early 2013 Model. Late 2013 models and after are NOT compatible with this SSD. To find this information go to the Apple menu at the upper left of your screen and select "About This Mac". The next screen will indicate the model of MacBook Pro you have. If it is not apparent there, select the "System Report" button on that screen and the next window will show "Model Identifier" near the top. Make sure your "Model Identifier" is either MacBookPro10,1 or MacBookPro10,2. If it is then this SSD is compatible with your machine.MacBook Pro (Retina, 15-inch, Mid 2012) Model Identifier: MacBookPro10,1 MacBook Pro (Retina, 15-inch, Early 2013) Model Identifier: MacBookPro10,1 MacBook Pro (Retina, 13-inch, Late 2012) Model Identifier: MacBookPro10,2 MacBook Pro (Retina, 13-inch, Early 2013) Model Identifier: MacBookPro10,2
G**F
Works well, easy install (with one minor issue)
Happy with the larger capacity, good speed, good price!The install was easy, strait forward, except the mount point, where the screw goes. The point where the drive mount screws into (on the computer) has a stand-off that is higher than the thickness of the MCE board. This makes the screw tighten against the threaded stand-off and leaves the board at the end of the drive a little loose. I added a small washer so the screw secures the board.
Trustpilot
1 week ago
1 month ago
