AD5M Pro 3D Printer 600mm/s High Speed & Precision, Full-Auto Calibration with 0.4&0.6mm Nozzle Bundle, CoreXY Structure & Auxiliary Chamber Cooling, ≤50 dB Quite Printing Camera Printers

This is a great printer for first time 3D printer users. This one actually wasn't my first, but I can say this printer is far easier to use than the Ender 3 I started with years ago. It's coreXY, prints pretty fast, and is easy to calibrate and use. No manual bed leveling. That's all automatic and also has input shaping and temperature calibration which is really very good for a printer in this price range. The nozzles are easily interchangeable, they just snap out. Some people may be turned off by the fact that the nozzle cartridges are proprietary, but they aren't very expensive. They're actually the nozzle and hot end in one assembly. So every time you swap the cartridge you get a new hot end too. I have yet to have to replace one after months of use, but I bought extras so that I can use a different nozzle for each filament type. I have printed PLA, PETG, ABS, and ASA with this printer. It can in theory print Nylon (PA) and Polycarbonate (PC) but those may be more difficult to use in this printer because it does not have a heated chamber. Even so, since it is enclosed the bed will heat the chamber via convection so it's worth a shot. Either way, for the price this printer does so much more than I expected. Support is also decent. It is based in China and so they may take a day to respond but they do respond, and they quickly sent me a replacement part without hassle when I needed it. Is the printer perfect? No, but it's probably the best you'll get for the price, and I am very satisfied with it. I would buy another one in a heartbeat, and in fact I'm looking into buying their multicolor printer next, the AD5X. Unbeatable value, and I highly recommend!

This was my second flashforge 3d printer and has worked flawless for the past few months very impressed with the quality of prints and is beginner friendly

I was really pleased when i first got this [printer 3 months ago .... however after 3 months of only a little use (delivered to me Dec 2025 now March 2026) I get an error message. after looking into it I see that this is common, frustrating this is they say they don't have parts in the US for the warranty repair (I suspect they have all been shipped out to other warranty issues) so they have to ship the parts to me from China. Update ..... I was eventually told what Flashforge "think is the problem" but spare parts have to be shipped from China I wasn't told what was needed until a week after reporting the warranty and am now told the shipping time for the parts they think are needed is 3 weeks !!! Waste of money, no support, spare parts shipped from China and they merely guess what to send you. Mine is still not working and is now just a big paperweight !!! EXTREMELY DISSAPOINTED

Fantastic 3d printer right out of the box (remember to remove all the screws and padding). this is the second 3d printer we have owned, and this one is leaps and bounds better with so many more features, super fast too. if ur thinking about it, and have reason to, i would recommend this product.

Good printer, I had an issue with the extruder etc and seller was responsive and sent me a whole new kit. Once you get the hang of it this printer is good for the price and for a first timer! I’m a complete newbie and have been able to print multi color prints etc

Extremely early review. Just received it at 1pm today setup was simple but it did freeze when finishing up the calibration. Did a power off and back on and it went all the way back threw setup again. This time it completed and updated the firmware. We have printed 3 of the files that came with the machine and 2 files we sliced ourselves. This thing is so much faster than my old Monoprice machine. I am tempted to print one of my older 12 hour prints just to see the difference. I have virtually no stringing on any of the prints so far but it has only been about 6 hours since it arrived. Currently printing a print in place hinged dragon for my daughter using some 8 year old purple PLA that I had left over. So far no strang issues with the old filament. Reading some of the bad reviews gave me some apprehension picking this up. I just figured its best practice to immediately use electronics. You never can tell if you receive a defective unit until you try them. Just remember the return windows are short but useful.

Great FDM printer. I have been printing resin for 4 years and this is my first FDM printer. Couldn't be happier. Printing in 20 mins, zero issues. Prints come out great. I would recommend watching instructions on loading filament as included were very basic to me. Touch screen is a little small for a big guy like me.

I have had this printer for 10 days and it should have come with a USB memory stick with software and files on it. I have tried for 10 days to get the memory stick from Flashforge. I even said it was O.K if they just provide the files on a zip files. First they said they could not send it. Second they needed my purchase order. Now they are asking for more information, which I have sent and provided and still no files. This is ridiculous. The printer seems to work well but the company's tech support is awful. This matter should have been settled over one email not several over 10 days. I am tempted to call and there tech support is only available 8 AM to 6 PM China Standard Time (CST). This acuttaly is from 9 PM to 6 AM EST. Not advantages for US customers. I just wanted to give others a heads up about Flashforge's tech support before purchasing a printer.