Description
- High Capacity 1800Mah 11.1V 20C Li-po Battery For AR Drone 2.0
- Adopted the most advanced control panel. The accurate charging voltage avoids shortening battery life.Alloy aluminum shell with good heat dissipation
- This multi-function charger can choose the fastest charge rate as 2A with optional 2A 1.2A 0.5A.Very easy to use plug and charge.Convenient and Safe.
- This charger can also be used for Parrot AR.Drone 1.0 original battery or updated battery. When use it for Ar.Drone 1.0,just use original battery charging adapter. Caution: Do not use 2A charge rate for Original battery. You could use 0.5A or 1.2A.
- G3220 Balance charger is one of the Li Battery balance charger which easy to use and convenience to mobile. It can support to charge the 2S or 3S LiPo & LiFe (A123). G3220 Balance charger has excellent performance of balance circuit and advanced charger mode, meantime, G3220 Balance charger has kinds of protection function, to make sure the battery is too safe & well-balanced to use.If the input voltage is more than 18V or lower than 10V, the charging process will beterminated to protect the charger from being damaged. Reverse polarity protection between input and output. Short circuit protection Over current protection & Over voltage protection Input voltage auto-adjust function: when input voltage is lower than 12V, the charger will reset the current to avoid power supply's breakage. 3 LED display currently charging current. 3 green LED display each cell in balancing, bright LED means balancing, un-bright means end of balance. 3 green LED bright all, means the balance and charging are finished, then please disenable the connecting line from the balance charger. Built-in high-speed balance module
Description:
Item name: G3220 Lipo/Life Balance Charger
Input voltage: DC10-18V
Battery type: LiPo/LiFe(A123)
Battery cells: 2-3S (can only charge one battery each time)
Charger current: 0.5, 1.2A, 2.0A
Balance precision:
Voltage precision for full charged: 4.20V ±0.02V
Size: 78mm x 50mm x 20mm
Weight: 60g
Operating steps for G3220 balance charger:
1. Preparing for power adapter or storage battery which matches with this balance charger (voltage: 11-16V, current: ≧2.0A), then Connect the power supply to balance charger.
2. Select the type of battery LiPo or LiFe.
3. Select the charging current.
4. Connect the 2S or 3S (LiPo or LiFe battery pack) to the balance charger G3220 to start charging.
5. 3 green LED bright all, means the balance and charging are finished, then pls disenable the connecting line from the balance charger G3220.
Note: Prohibit to connect 2S and 3S together to charge at the same time.
Do not allow metal wires or other conductive material into the G3220 balance charger.
Package included:
1 x G3220 Balance Charger
1 x Adapter
1 x Original Battery Charging Adapter Card
1 x 11.1v 1800mah Li-po battery
