BLACK+DECKER Lawn Edger Trencher 2 in 1, 12 Amp 7.5 in. Electric Edger Lawn Tool for Landscaping and Trench Digger, 3 Height Settings, Corded (LE760FF)

This is a great lightweight and portable edger. It’s much easier to use than a gasoline powered model. The only limiting factor is the length of the electric cord. It does a great job and make sure your driveways and sidewalk look manicured.

Best edger

Works as described. I tried a battery powered to replace previous edger but had to stop and recharge the battery before completing edging the lawn. Hauling the extension cord is not that difficult so I prefer that to stopping to recharge the battery before completing yard work.

I have zoysia grass, and if your familiar with that you know its as thick as crab grass. I also had a sidewalk and driveway that hadn't been edged for a couple of years. This edger was up for the task. It easily cut away 3-5 inches of over-growth a few inches thick. I actually filled up 3 lawn bags which is a lot. I also like the way the edger is easy to maintain a straight line for a nice finish. I found that a back-and-forth motion was the best way to remove years of over-growth. Now that I have conquered the over-growth, I run the edger once every month and I am able to keep a clean professional looking edge along my driveway and sidewalks. Because this is electric, it has plenty of power. And because of the wheels it is easy to move and is not to heavy. It's a little loud so ear protection would be wise but not necessary. I have purchased some replacement blades and put them on and it only takes a few minutes and is easy to do. My neighbor was using his battery powered edger, he has zoysia grass also and asked to borrow my edger. He has since bought his own just like mine.

given as gift but I liked the weight and ease of handling. Seemed well made and simple to use. I was pleased with size and features.

Probably could've/should've rated this 2 stars yet it works well when it works. I purchased this edger to edge my drive and sidewalks and not for trenching. The edger arrived very quickly after I ordered it (I am not a Prime member so this was a nice surprise). Assembly was easy and straight-forward. The first use went smoothly and the edger performed flawlessly and provided clean, smooth edging. About 20 minutes into the second use I noticed that the edger was cutting and quickly determined that the blade was spinning freely -- fortunately the hex nut was still attached to the threaded shaft. I reviewed the manual that came with the edger, grabbed the correct sized socket and torque wrench. I removed the hex nut, the first washer, the blade and then the second washer. To install I followed the directions ensuring that the flats of the washer aligned with the flat on the shaft and tightened the hex nut to the specified 140 in-lbs. The edger worked well for about 10 minutes and the blade once again became loose. This time I replaced the original blade (which did not need to be replaced from a wear perspective) with a new B&D blade and new washers. Once again I followed the instructions and this time the edger performed flawlessly until about 5 minutes remaining in my edging when once again the blade came loose. my experience has most certainly been frustrating to say the least. one should not need to carry a socket and torque wrench with them and repeatedly need to tighten the blade. So, when the edger performs as intended it does an excellent job at edging; however I have no confidence that this edger will be able to perform as intended throughout repeated uses and more importantly has shown that it cannot complete my edging without requiring tightening the blade (which requires disassembly down to the second keyed washer). Potential buyers should be prepared for this experience and make your decision accordingly. Note: I tried contacting black and decker via twitter (@blackdeckerhome) and never received a response; I could not find a separate customer service/support twitter account. Trying to contact customer service via the phone these days is an exercise in patience to say the least.

My previous electric edger was a SunJoe. It finally gave up on me due to overwork and old age. I was completely satisfied with this product and was looking to replace it with the same product. Evidently SunJoe no longer offers this product. I decided to try the Black +Decker just because I know the reputation of the brand. I was not disappointed, in fact I was very pleased with the performance of this edger. It was more powerful and easier to manage while in use. It makes keeping the lawn looking clean cut a breeze. If you are looking for an electric edger I think you will be satisfied with this product.

This is our second purchase of this product. We had the first one for over ten years and we ended up breaking it(our fault). Immediately bought same one. This is a reliable machine. It goes right through thick weeds and rock hard dirt to edge a lawn or trench. Like I said our previous one lasted ten years and worked just as well in year ten never replaced the blade once. This one came with a back up blade as well which is a bonus. Highly recommend this. Easy to assemble. Takes five minutes. Durable. Powerful. There is hieght adjustment as well. Well worth the price!

Purchased edger to trim thick overgrowth along paving stone pathway. String trimmer just would not do the job. Easy to use, assemble, and did a terrific clean, crisp edge. Just what I'd been looking for.

ちょっと高価な買い物だったけど良い仕事をしてくれているので費用対効果はグッドです。

Es Perfecta Para El Uso En El Jardín.

Facilita enormemente el trabajo de orillar

I have about 200 feet of walk and driveway to keep trimmed. Once I saw this item I jumped to buy it. I am amputee and have hip and knee replacements on the opposite leg and being over 75 I had only minor difficulty adjusting to a new tool. Once I got the hang of it it did a great job an d now my walks and drive look like a pro team of gardeners had done the work. It also comes with as spare cutting blade. Being a corded machine one has to exercise caution regarding the cord, but you do not need to worry about a battery dying part way through the job.